Quantum ACL 452, ACL 2640 Installation Guide

ACL 4/52 Auto mated Tape Library

for DLT Cartridges

Facilities Planning and

Installation Guide

6211221-06

Ve r. 6, Rel. 0

ACL 4/52 Facilities Planning and Installation Guide, 6211221-06, Ver. 6, Rel. 0, December 1999. Printed in the USA.

ATL Products, Inc. provides this publication “as i s” wi th out w ar rant y of any k ind , eit her express or implied, including but not limited to the implied warranties of merchantability or fitness for a particular purpose. ATL Products, Inc. may revise this publication from time to time without notice.

Your right to copy this manual is limited by copyright law. Making copies or adaptations without prior written authorization of ATL Products, Inc. is prohibited by law and constitutes a punishable violation of the law.

TRADEMARK STATEMENT

Prism Library Architecture, IntelliGrip, WebAdmin, and WebLibrarian are all trademarks of ATL Products, Inc.

Other trademarks may be mentioned herein which belong to other companies.

FCC STATEMENT

This equipment has been tested a nd foun d to compl y w ith th e limit s fo r a Class A digital device, pursuant to Part 15 of th e FCC Rules. These limits are designed to provide r easonable pr otection against harmful int erfer ence when the equipment is operated in a commercia l envir on ment. This equipmen t gene rates, uses , and can ra diate r adio fr equen cy ener gy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.

Any changes or modifications made to this equipment may void the user's authority to operate this equipment. Operation of this equipment in a residential area may cause interference in which case the user at his own expense will be

required to take whatever measures may be required to correct the interference.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

INDUSTRY CANADA (DIGITAL APPARATUS)

Interference-Causing Equipment Standard

ICES-003 Issue 2

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Cet appareil numérique de la classe A respecte toutes les exigences du Reglément sur le matériel brouilleur du Canada.

CISPR-22 WARNING!

This is a Class A pr oduct. In a domestic en vironment this product ma y ca use r adi o in terference in which case the user may be required to take adequate me asures.

ACHTUNG!

Dieses ist ein Gerät der Funkstörgrenzwertklasse A. In Wohnbereichen können bei Betrieb dieses Gerätes Rundfunkstörungen auftreten, in welchen Fällen der Benutzer für entsprechende Gegenmassnahmen verantwortlich ist.

A TTENTION!

Ceci est un produit de classe A. Dans un environment domestique, ce produit peut causer des interférences radioélectriques. Il appartient alors à l'utilisateur de prendre les mesures appropriées.

6207947-06cA 34

NOTICE FOR USA AND CANADA ONLY

If shipped to USA, use the UL LISTED power cord specified below for 100-120 V operation. If shipped to Canada, use the CSA CERTIFIED power cord specified below for 100-120V operation.

Plug Cap Parallel blade with ground pin (NEMA 5-15P configuration)

Cord Type: SJT, three 16 AWG (1.5 mm

) or 18 AWG (1.0 mm2) wires Length Maximum 15 feet (4.5m)

Rating Minimum 10 A, 125 V

ATTENTION

LIRE LA REMARQUE DANS LE MODE D'EMPLOI.

REMARQUE

CETTE REMARQUE NE CONCERNE QUE LES ÉTATS-UNIS ET LE CANADA. En cas d'envoi aux États-Unis, utiliser le cordon d'alimentation CERTIFIÉ UL et convenant pour 100-120 V.

En cas d'envoi au Canada, utiliser le cordon d'alimentation CERTIFIÉ CSA et convenant pour 100-120 V.

Fiche Broches parallèles avec une broche de mise à la terre (configuration NEMA 5-15P)

Cordon Type: SJT, trifilaire 16 AWG (1.5 mm

) ou 18 AWG (1.0 mm2)

Longeur Maximum 15 pieds (4.5m)

Capacité Minimum 10 A, 125 V

LASER STATEMENT

Class 1 Laser Product

CAUTION: With all panels and enclosures in place, this product is rated as a Class I laser product. The bar code scanner inside this product, ho wev er, is a Class II laser. Avoid exposure to the laser light emitted from the bar code scanner. Do not stare into the beam.

CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous exposure.

Laser Klasse 1

VORSICHT: Dieses Produkt Enthdlt Einen Laser Der Kategorie II. Laserstrahlen - Der Strichcode-scanner Gibt Laserstrahlen aus. VERMEIDEN SIE jeden Blickkontakt und direkten kvrperlichen Kontakt mit diesen Strahlen.

VORSICHT: Ein nicht ordnungsgemd_er (siehe hier enthaltene Anweisungen) Einsatz bzw. Dnderungen der Betriebsleistung kvnnen einen gesundheitsgefdhrdenden Kontakt zur Folge haben.

Appareil à Laser de Classe 1

ATTENTION: Ce produit émet de la classe laser II. Rayonnement laser - NE PAS fixer des yeux le rayon. Éviter les expositions - Le rayonnement laser est émis à partir du lecteur optique de code barre.

ATTENTION: L’utilisation de contrôles ou d’ajustements de performa nce des procédur es autr es que ceux indiqués ici peut entraîner une exposition dangereuse.

Producto Láser de Clase 1

¡ATENCIÓN! Este producto contiene laser de c las e II. Luz de laser - NO mir e el rayo. Evite el cont a cto con la luz: la luz de laser se emite desde el explorador de código de barras.

¡ATENCIÓN! El uso de los controles o ajustes para realizar procedimientos que no son especificados puede provocar una situación peligrosa.

Luokan 1 Laserlaite

ATTENZIONE: Questo prodotto emette una luce laser di Classe II . NON guar d ar e il fac sio di luc e ed evita r e di esporsi alla fonte del laser. Il fascio di luce laser h emesso dal dispositivo di scansione del codice a barre.

ATTENZIONE: L’uso di comandi o regolazioni per eseguire le procedure che non siano quelli specificati in questa documentazione pur causare rischi all ‘incolumit’ delle persone.

BATTERY STATEMENT

Caution

The Dallas Semiconductor DS1230AB-200 component on th e ro botic contr oller bo ar d inside t his pr oduct conta ins a lith ium battery. Lithium is a hazardous material that must be disposed of in accordance with local, state, and federal law.

Forsigtig

Båndbiblioteket indeholder et lithiumbatteri. Dallas Semiconductor DS1230AB-200 på robotkontroltavlen indeholder et lithiumbatteri. Lithium kan anses for at være et sundhedsfarligt materiale. Kassér dette batteri i overensstemmelse med lokale og nationale lovbestemmelser.

Huomautus

Nauhakirjastossa on litiumparisto. Robottiohjainkortin Dallas Semiconductor DS1230AB-200-puolijohteessa on litiumparisto. Litium voidaan luokitella vaaralliseksi aineeksi. Pariston hävittämisessä on noudatettava viranomaisten antamia ohjeit a ja määräyksiä.

Attention

La bibliothèque de bande contient une pile au lithium. Le Dallas Semiconductor DS1230AB-200 sur la carte robotic contrôleur contient une pile au lithium. Le lithium peut être considéré comme matériau dangereux. Jeter cette pile conformément aux lois locales, d’état et fédérales.

Achtung!

Die Bandbibliothek enthält eine Lithiumbatterie. Der Halbleiter Dallas Semiconductor DS1230AB-200 auf dem RoboterController enthält ein e Lithiumb at terie. Lithium gilt als Schadstoff. Bei der Ent sorgung dieser Batterie alle ents prechenden kommunalen, staatlichen und bundesweiten Vorschriften beachten!

Attenzione

La libreria a nastro magnetico contiene una batteria al litio. Il semiconduttore Dallas Semiconductor DS1230AB-200 sulla scheda controller robotic contiene una batteria al litio. Il litio può essere considerato un materiale pericoloso. Eliminare queste batterie in conformità alle normative locali e statali vigenti.

Forsiktig

Kassettbiblioteket inneholder et litiumbatteri. Enheten Dallas Semiconductor DS1230AB-200 på robotkontrollkortet inneholder et litiumbatteri. Litium kan anses som et farlig materiale. Batteriet skal kastes i henhold til lokal og nasjonal lovgivning.

Precaución

La biblioteca de cintas contiene una pila de litio. El semiconductor Dallas Semiconductor DS1230AB-200 en el tablero controlador robotic contiene una pila de litio. El litio puede considerarse como un material peligroso. Deseche esta pila de acuerdo con las leyes municipales, estatales y federales.

Varning!

Magnetbandsbibliot eket inn ehå ller ett lit iumb atter i. Dal las Sem icondu ctor D S1230 AB-20 0 på r ob otsty rkor tet inn ehå ller ett litiumbatteri. Litium kan anses vara ett farligt material. Kassera detta batteri i enlighet med lokala och statliga lagar och förordningar.

Contents

Preface

Chapter 1

Installation Requirements..........................................................................1

Library Specifications ...................................................................................2

Site Requirements..........................................................................................3

Floor Space........................................................... ....................................3

Floor Clearance .......................................................................................3

Floor Inclination.................................................................... ......... .........3

Floor Strength..........................................................................................4

Power............................................................................. ...........................4

Grounding..................................................................... ......... ..................4

Chapter 2

Unpacking the Library................................................................................5

Receiving the Library....................................................................................6

Unpacking the Library................................................................ ......... .........7

Removing the Library from the Pallet........................................................9

Moving the Library to the Installation Site..............................................10

Removing Internal Packing and Inserting Tape Cartridges .................11

Removing the Left Cosmetic Panel 11 Removing the Tie-Wraps 12 Removing the Foam Blocks 13 To Load Available Tape Cartridges 14

Reinstalling the Left Cosmetic Panel 15

Storing the Packing Materials....................................................................16

Packing the Library for Shipment.............................................................17

Removing Power from the Library 17

Removing the Left Cosmetic Panel 17

Unloading the Library..........................................................................18

Installing the Internal Packing Materials 18

Reinstalling the Left Cosmetic Panel 19

Moving the Library onto the Shipping Pallet...................................19

Securing the Library to the Pallet 19

viiACL 4/52 Facilities Planning and Installation Guide

Contents

Chapter 3

Installing the Library................................................................................21

Gathering Required Tools .........................................................................22

Leveling the Library...................................................................................23

Setting Up and Testing the Library..........................................................24

Turning On the Library 24

Setting SCSI Addresses........................................................................24

Configuring Library Options 24 Performing a System Test 25 Performing an Inventory 25

Connecting the Host Computer ................................................................26

Appendix A

SCSI Cabling Options...............................................................................29

SCSI Configurations.............................................................................29

Appendix B

Supplemental Installation Procedures..................................................31

Defining the Library Power-Up State......................................................32

Enabling/Disabling the Auto-Clean Option ..........................................34

Enabling/Disabling the Auto-Load Feature...........................................36

Cartridge/Tape Drive Compatibility ......................................................38

Loading the Library with Cartridges.......................................................39

Performing an Inventory ...........................................................................41

Turning the Interior Light On/Off...........................................................43

viii ACL 4/52 Facilities Planning and Installation Guide

Figures

Figure 1 Library Mechanical Specifications ..........................................2

Figure 2 Library Power Specifications...................................................2

Figure 3 Library Environmental Specifications....................................2

Figure 4 Floor Space Requirements........................................................3

Figure 5 Library’s AC Power Receptacle..............................................4

Figure 6 Space Requirements for Unloading........................................6

Figure 7 Removing the Box from the Pallet...........................................7

Figure 8 Unpacking the Library..............................................................8

Figure 9 Rolling the Library Off the Pallet............................................9

Figure 10 Removing the Left Panel.........................................................12

Figure 11 Removing Tie-Wraps ..............................................................13

Figure 12 Removing the Foam Blocks....................................................14

Figure 13 Tape Cartridge Orentation.....................................................14

Figure 14 Cabling the Library........................................................... .......27

Figure 15 Single Wire SCSI Configuration (Default) ...........................30

ixACL 4/52 Facilities Planning and Installation Guide

x ACL 4/52 Facilities Planning and Installation Guide

Tables

Table 1 Required Tools.........................................................................22

Table 2 Cartridge/Tape Drive Compatibility...................................38

xiACL 4/52 Facilities Planning and Installation Guide

xii ACL 4/52 Facilities Planning and Installation Guide

Preface

Audience

Purpose

Document Organization

This book is designed to aid field service engineers and other technical users in the initial setup of the t ape library system. It begins with a si te requirements and continues with unpacking and installation procedures. It also contains basic troubleshooting information.

This book describes facility preparation and first-time installation procedures for the Enterprise Tape Library 4/1800. It includes library specifications, installation site requirements, unpacking instructions, and hardware installation and testing procedures.

Following is a brief description of chapter contents.

• Chapter 1, “Installation Requirements,” provides library

specifications and the physical requirements for the installation

site.

• Chapter 2, “Unpacking the Library,” explains how to unpack and

move the ACL 4/52 library to the final installation site.

• Chapter 3, “Installing the Library,” explains how to inst all the ACL

4/52 library.

Notational Conventions

Note:

This manual uses the following conventions:

Caution:

Cautions indicate potential hazards to equipment and are included to prevent damage to equipment.

Notes emphasize important information related to the main topic.

Warning:

Warnings indicate potential hazards to personal safety and are included to prevent injury.

This manual uses the following:

ACL 4/52 Facilities Planning and Installation Guide

xiii

• Right side of the library — Refers to the right side as you face the component being described.

• Left side of the library — Refers to the left side as you face the component being described.

• b — All binary numbers are succeeded by “b.”

• h — All hexadecimal numbers are succeeded by “h.”

• Error or attention conditions are represented in parenthesis that translate as follows:

(SK=S ASC=AA ASCQ=QQ) where:

S — hexadecimal sense key value AA — hexadecimal additional sense code

Installation Requirements

This chapter describes library specifications and the physical requirements for the installation site.

ACL 4/52 Facilities Planning and Installation Guide

Chapter 1 Installation Requirements Library Specifications

Figure 1 Library Mechanical Specifications

Height 44 inches (111. 76 cm) Width 21.5 inches (54.61 cm) Depth 31.12 inches (79. 04 cm) We ight 361 lbs. (164 kg) with 4 tape drives and 52 DLT cartridges

Figure 2 Library Power Specifications

AC Power Rating 100–120V/200-240V, 4A/ 2A, 50/60 Hz AC Voltage Range 90–132 VAC or 180–264 VAC Frequency Range 47–63 Hz

Library Specifications

The tables in this section provide the mechanical, power, and environmental specifications for the Enterprise library. Use these specifications to help select an appropriate installation site and environment.

Figure 3 Library Environmental Specifications

Te mperature: Storage—Short-Term (<60 Days)

Relative Humidity:

Altitude: Short-Term (<60 days in storage)

Heat Dissipation:

-40 to 151°F (-40 to 66°C) Storage—Long-Term (>60 Days) Transport Operating

Non-Operating (Storage) Non-Operating (Transport) Operating

Long-Term (>60 days in storage) Operating

Operating 880 BTU/hr (220 KCal/hr or 260

41 to 122°F (5 to 50°C)

-40 to 151°F (-40 to 66°C)

59 to 90°F (15 to 32°C) 95% (Wet bulb temp = 90°F/32°C)

95% (Wet bulb temp = 115°F/46°C) 20–80% (Wet bulb temp = 77°F/25°C)

12,000 ft (3,658 km) 12,000 ft (3,658 km) 6,562 ft (2.0 km) @ 76°F Max. & 589 mmHg

watts)

ACL 4/52 Facilities Planning and Installation Guide

Chapter 1 Installation Requirements

31.12”

21.5”

Library

(Ramp Side/Off-load Area)

(For Maintenance Only)

(Maintenance Area)

25”

72”25”

128”

71”

Front of Library

Ventilation and

Cabling

Site Requirements

Floor Space

Figure 4 Floor Space Requirements

Site Requirements

This section describes the following installation site requirements for the library:

• Floor space

• Floor clearance

• Floor inclination

• Floor strength

•Power

•Grounding

Floor Clearance

Floor Inclination

The cabinet has a nominal floor clearance of 0.75 inch (1.9 cm). The library should be placed on a level, uncarpeted floor free of cracks, depressions, and so on.

The floor in the installati on site m ust be level to withi n 0.25 i nch over a 6 x 6 foot area.

ACL 4/52 Facilities Planning and Installation Guide

Chapter 1 Installation Requirements Site Requirements

Floor Strength

Power

Figure 5 Library’s AC Power Receptacle

The floor in the installation site must be a standard raised computer floor rated at 250 lb/ft

. This is sufficient to support a fully loaded

Enterprise library.

The library’s auto-ranging motor and logic power supplies accept single-phase, 90–264 VAC input power at 47–63 Hz.

The power inlet connector is a IEC-320 connector. For international applications you must replace the power cord set with a harmonized 3x2.0 mm

power cord set that is approved by the country where used.

~100-120V / ~200 - 240V

4A / 2A 50/60 Hz IEC-320 Type

Ground

Line

Neutral

Grounding

The installation site must provide an earth ground cable for the library.

ACL 4/52 Facilities Planning and Installation Guide

Chapter 2

Chapter 2 Unpacking the Library

Note:

Unpacking the Library

This chapter explains how to unpack and move the Enterprise library to the final installation site.

Before following the instructions in this chapter, make sure the site chosen for the library meets the requirements found in Chapter 1.

The procedures listed above must be performed in the order they appear in this document. After completing these procedures, continue the installation by following the instructions in Chapter 3.

ACL 4/52 Facilities Planning and Installation Guide

+ 47 hidden pages