Quanta Microsystems UWAC4Z User Manual

User Manual
USB Wireless Adapter
Model
UWA-C4Z
ersion:
V
Date:
Feb
v0.3
09, 2012
Contents
1. Revision History ............................................................................................................... 4
2. Related Documents .......................................................................................................... 4
3. Overview ........................................................................................................................... 5
3.1. Scope......................................................................................................................5
3.2. Features .................................................................................................................. 5
3.3. Specification .......................................................................................................... 6
3.4. Interface definition................................................................................................. 7
3.5 RoHS & Green Parter Compliant .......................................................................... 7
3.6 EMI EMC certifications.........................................................................................7
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable.
Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.
1. Revision History
Date Release Author Description
Apr 13, 2011 0.1 Jack Ong First release Feb 06, 2012 0.2 Jack Ong Added Engineering Sheet Feb 09, 2012 0.3 Jack Ong Added Housing drawi ng
2. Related Documents
Date Author Document(s)
3. Overview
3.1. Scope This document describes the specifications of ZU210 IEEE
802.15.4 RF4CE ZigBee transceivers module. The low power consumption and smaller size are suitable for consumer electronic. ZU210 also provides a cost-effective solution for short-range data links and networks.
3.2. Features
f
Extremely low cost
f
Ease of implementation
f
Reliable data transfer
f
Short range operation
f
Appropriate levels of security
3.3. Specification
f
Absolute Maximum Ratings
Rating Symbol Value Unit Power Supply Voltage Storage Temperature Range Tstg -20 to 70 °C
f
Operating condition
Rating Symbol Min Typ Max Unit Power Supply Voltage Operation Temperature Rang Operation Frequency f 2.405
f
Characteristic (operating voltage=V
Characteristic Min Typ Max Unit DC Electrical Characteristics
V
, V
BATT
V
BATT
T
A
; temperature=25°C)
DC
DDINT
, V
DDINT
4.5 5 5.5
-10 25 60 °C
-0.3 to 5.5 Vdc
V
DC
2.475 GHz
Normal mode current --- TBD --- mA Idle mode current Sleep mode current
TBD TBD
mA
Transmit Transmit Power 14 17 20 dBm Transmit Center Frequency Tolerance -20 0 20 ppm Error Vector Magnitude (EVM) (over temp.) --- 15 35 % Receiver Sensitivity for 1% Packet Error Rate (PER) --- -102 -95 dBm Maximum Input Power -10 Channel Rejection for 1% PER (desired signal -100 dBm) +5 MHz (adjacent channel)
-5 MHz (adjacent channel) +10 MHz (alternate channel)
-10 MHz (alternate channel)
---
---
---
---
45 45 56 56
---
---
---
---
dBm
dB dB dB dB
3.4. Interface definition
f
Connector 4-PIN
Pin Pin Name 4 GND 3 D+ 2 D­1 VDD
3.5. RoHS & Green Parter Compliant
ZU210 is fully compliant to RoHS & Green Parter requirement.
3.6. EMI EMC certifications
ZU210 is fully compliant with FCC regulatory requirements.
Loading...