Quanta Computer Inc.
Quanta K71 Quick Guide
Quanta K71 device Quick Guide
Package contents
The K71 device have included below items when opened the carton packing. Please make sure that you have
received all of contents before device installing.
K71 unit x 1
Power cord x 1
Clean cloth x 1
Quick guide paper x 1
Installing K71
1. Connect power cord and LAN cable to K71 as illustrated below. Press power button to power on K71.
When powered on, the power LED on power button will turn blue light.
2. Please make sure the LAN cable is connected and works well. When powered on, you can see the requests
of Google register setting on the screen. Before device operation, you need to finish the Setup installing.
Model No: K71
Quick Guide release version: 01
Quick Guide release date: 20130801
Figure1 K71 unit back side
Getting to know K71
Front side introduction
1. On the top of panel area, there is a hole for microphone function.
2. There is a camera module in the middle of Top panel area.
3. Volume keys
Use volume up and down keys to adjust the volume.
4. Home/wake-up key
Press the home key to wake up K71 from standby mode and go back to K71 home page.
Quanta Computer Inc.
Initial Setup K71
1. When the device is powered on, you will enter the initial set-up screen in the beginning. Choose your
language and then press “Start” key for next step.
Figure 2
Back side introduction
1. Camera tilt knob
K71 camera only support tilt function. Adjust view angle upward or downward with the adjust knob on
the back of the camera.
2. AC in/SD card slot/AC power jack/USB/LAN/Power button were displayed at I/O plate on the back of device.
2. Select your “Wi-Fi” item or you can skip it and set up in the future.
3. If you have Google account, you can fill in data at this step. Or you can choose “NO” item for next step.
Figure 3
Quanta Computer Inc.
4. If you do not have Google account, you can get an account now. Or you can choose “Not now” to skip.
5. Please finish “Google & location” settings at this step.
9. Press next step for confirming “Google services”
6. You can finish “Sign in” settings at this step.
7. Please set up you Date & time.
10. Press “Finish” to complete device initial Setup process. Congratulation, you have just finished K71 device
initial Setup process. Now, you can start to enjoy the entertainments which were brought from K71 device.
8. Type in your name or keep empty for next step.
Quanta Computer Inc.
How to use K71
1. When you see this screen picture, press “OK” to enter home screen for further operations.
2. This is the default home screen figure
4. This is APPS screen. You can search for all Apps items in this screen.
5. WIDGETS screen
3. When you want to find other installed apps, you can press the apps icon to enter APPS screen.
6. You can press “Back” Key to return last action during the operations.
7. When you are in other operations screen, you can also press “Home” Key to return Home screen.
Quanta Computer Inc.
Model
K71
Dimension
Total Weight
Packing Weight
CPU
System Memory
Embedded Storage
LCD
Touchscreen
VoIP Support
I/O ports
Connector on board
Wireless LAN
Bluetooth
ZigBee
Sensor
Card Reader
8. When you want to find the recent apps which visited before, you can press “Recent” Key.
9. You can press this icon to enter more settings.
K71 device spec list
15.6": 401.38mm x 242.15mm x 102.8mm (L x W x T) (with rubber feet)
3.5kg N.W/3.9kg G.W
0.75kg
TI OMAP 4430 1GHz
LPDDR2, 8Gbits
e-MMC 16G Bytes
LCD Gerneral spec
10. You can find “WIRELESS & NETWROKS/DEVICE/PERSONAL” settings on the screen and adjust your settings.
CAP Type; Full-screen Multipoint Touch Panel(10 points)
Optional
USB x1 (2.0)
Ethernet RJ45 x1
PWR Keyx1
3.5mm Stereo Audio In Jack x1
OTG USB x1
HDMI-out x1
Yes (802.11b/g/n)
Yes (v4.0)
N/A
G-sensor x1
Light Sensor x1
1 for SD and MMC type
Quanta Computer Inc.
Model
K71
Web Camera
Audio
Speaker
Internal Mic
Main Battery
Power cord
Button/Switch
Operating System
In-box Accessory
Operating temp
Storage temp
Regulation
Safety
Sleep mode power
consumption
Full mode power
consumption
Power off mode
power consumption
Max power
K71 device Safety statement
CMOS Sensor
5M, auto-focused
CQEx+ Up-Down Tilt
Output image format: H.264, MJPG, YUV
Frame rate: 30fps
TI AIC3262
Stereo Loudspeakers: 5W/5W (Left/Right)
Analog x1
ML Lithium Rechargeable Battery
Nominal Capacity：335 mAh
Nominal Voltage：3.7V
Watt-hour：1.23 W/hr
Chemical System：Lithium Cobalt Dioxide / Chain Carbonate
Embedded; 19V/1.58A
Power Switch x1 with blue LED on rear I/O
Wake-up key with capacitive switch on front panel
Volume key (up/down) with capacitive switch on front panel
Android 4.1.1 (Jelly Bean)
Cleaning cloth x1, Size: 170x145mm, Black color
Power cord x1, Size: 1.8m, White color
0℃~40℃
-20℃~70℃
RoHS, WEEE
CE/FCC/UL
TBD(0.5W)
CE Marking
This device has been tested to and conforms to the regulatory requirements of the European Union and
has attained CE Marking. The CE Mark is a conformity marking consisting of the letters “CE”. The CE
Mark applies to products regulated by certain European health, safety and environmental protection
legislation. The CE Mark is obligatory for products it applies to: the manufacturer a ffixes the marking in
order to be allowed to sell his product in the European market.
This product confor ms to the essential requirements of the R&TTE directive 1999/5/EC in order to at ta in
CE Marking.
The CE Marking is not a quality mark. Foremost, it refers to the safety rather than to the quality of a
product. Secondl y, CE Marking i s mandat ory for the pr oduct it appli es to, w her eas most q ual ity marki ngs
are voluntary.
Marking: The product shall bear the CE mark.
Federal Communications Commission (FCC) Statement
15.21
You are cautioned that changes or modifications not expressly approved by the part responsible for
compliance could void the user’s authority to operate the equipment.
TBD(30W)
0.5W
TBD
15.105(b)
This equipment has been teste d and f oun d to comply with the limits for a Class B digital device,
pursuant to part 15 of t he FCC rules . These li mi ts are desi gne d to pr ov ide reas onabl e prot ect ion agai nst
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular inst all ation. If t his eq uip ment does cause har mful i nter fer ence t o r adio or tel ev ision r ece ption ,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Quanta Computer Inc.
-Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1) this device may not cause harmful interference and
2) this device must accept any interference received, including interference that may cause undesired
operation of the device.
FCC RF Radiation Exposure Statement:
1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 20 centimeters between the
radiator and your body.
Loading...