Quanmax QutePC-4100 Series, QutePC-4200 Series, QutePC-4000 Series, QutePC-4101, QutePC-4102 User Manual

Download

QutePC-4100 Series User’s Manual

QutePC-4100 Series

0.6-Liter Box PC with Intel® 3rd generation Core i3-3227U Processor

User’s Guide

QutePC-4100 Series User’s Manual

Contact Info: Quanmax Inc.

5F, No. 415, Ti-Ding Blvd. Sec. 2, NeiHu District, Taipei, Taiwan 114 Tel: +886-2-2799-2789 Fax: +886-2-2799-7399

Visit our site at: www.quanmax.com

© 2013 Quanmax Inc. All rights reserved. The information in this user’s guide is provided for reference only. Quanmax does not assume any liability arising out of the application or use of the information or products described herein. This user’s guide may contain or reference information and products protected by copyrights or patents and does not convey any license under the patent rights of Quanmax, nor the rights of others. Quanmax is a registered trademark of Quanmax. All trademarks, registered trademarks, and trade names used in this user’s guide are the property of their respective owners. All rights reserved. This user’s guide contains information proprietary to Quanmax. Customers may reprint and use this user’s guide in other publications. Customers may alter this user’s guide and publish it only after they remove the Quanmax name, cover, and logo. Quanmax reserves the right to make changes without notice in product or component design as warranted by evolution in user needs or progress in engineering or manufacturing technology. Changes which affect the operation of the unit will be documented in the next revision of this user’s guide.

Content

QutePC-4100 Series User’s Manual

Content

Content ....................................................................................................................... 3

Figures & Tables ......................................................................................................... 4

Safety Instructions ...................................................................................................... 5

Before You Begin .................................................................................. 5

When Working Inside a Computer ........................................................ 6

Preventing Electrostatic Discharge ....................................................... 6

Instructions for Lithiu m Batt ery ............................................................. 7

Voltage Ratings ..................................................................................... 7

Preface ....................................................................................................................... 8

How to Use This Guide ......................................................................... 8

Unpacking ............................................................................................. 8

Regulatory Compliance Statements ...................................................... 8

Warranty Policy ..................................................................................... 9

Maintaining Your Computer ................................................................. 10

Chapter 1 Introduction ........................................................................................... 13

Overview ............................................................................................. 13

Product Specifications ........................................................................ 14

System tour ......................................................................................... 15

Mechanical Dimensions ...................................................................... 18

Chapter 2 Getting Started ...................................................................................... 19

Setting up your PC .............................................................................. 19

Mounting your PC to a monitor ........................................................... 22

Anti-theft protection with a Kensington Lock ....................................... 23

Chapter 3 AMI BIOS Setup .................................................................................... 24

Overview ............................................................................................. 24

Main Menu .......................................................................................... 25

Advanced Menu .................................................................................. 26

Boot Menu .......................................................................................... 33

Security Menu ..................................................................................... 34

Save & Exit Menu ............................................................................... 34

Chapter 4 Driver Installation .................................................................................. 36

Figures & Tables

QutePC-4100 Series User’s Manual

Figures & Tables

Figure 1 Front Panel .................................................................................. 15

Figure 2 Rear Panel ................................................................................... 16

Figure 3 Mechanical Dimensions ............................................................... 18

Figure 4 DP/ HDMI ..................................................................................... 19

Figure 5 Connecting USB mouse & keyboard ............................................ 20

Figure 6 RJ45 connector ............................................................................ 21

Figure 7 Turning on the system ................................................................. 21

Figure 8 VESA mounting ............................................................................ 22

Figure 9 Use a Kensington lock ................................................................. 23

Table 1 QutePC-4100 series product specifications ................................... 14

Table 2 BIOS Main Menu ........................................................................... 25

T abl e 3 Advanced Menu ............................................................................. 26

Table 4 Advanced Menu – Display Configuration ....................................... 27

Table 5 Advanced Menu –Power Management Configuration .................... 28

Table 6 Advanced Menu –CPU Advanced Configuration ........................... 29

T abl e 7 Advanced Menu –SATA Configuration ........................................... 30

T abl e 8 Advanced Menu –Intel (R) Rapid Start Technology ....................... 30

T abl e 9 Advanced Menu –USB Configuration ............................................ 31

T abl e 10 Advanced Menu –H/W Monitor .................................................... 32

Table 11 Boot Menu ................................................................................... 33

Table 12 Security Menu ............................................................................. 34

Table 13 Save & Exit Menu ........................................................................ 34

Safety Instructions

QutePC-4100 Series User’s Manual

Safety Instructions

 Before You Begin

Before handling the product, read the instructions and safety guidelines on the following pages to prevent damage to the product and to ensure your own personal safety. Refer to the “Advi sories” section in the Preface for advisory conventions us ed in this user’s guide, including the distinction between Warnings, Cautions, Important Notes, and Notes.

 Always use caution when handling/operating a computer. Only qualified,

experienced, authorized electronics service personnel should access the interior of a computer. The power supplies produce high voltages and energy hazards, which can cause bodily harm.

 Use extreme caution when installing or removing components. Refer to the

installation instructions in this user’s guide for precautions and procedures. If you have any questions, please contact Quanmax Post-Sales Technical Support.

 Access can only be gained by service persons or by users who have

been instructed about the reasons for the restrictions applied to the location and about any precautions that shall be taken; and access is through the use of a tool or lock and key, or other means of security, and is controlled by authority responsible for the location.

WARNING

High voltages are present inside the chassis when the unit’s power cord is plugged into an electrical outlet. Turn off system power, turn off the power supply, and then disconnect the power cord from its source before removing the chassis cover. Turning off the system power switch does not remove power to components.

Safety Instructions

QutePC-4100 Series User’s Manual

 When Working Inside a Computer

Before taking covers off a computer, perform the following steps:

1. Turn off the computer and any peripherals.

2. Disconnect the computer and peripherals from their power sources or subsystems to prevent electric shock or system board damage. This does not apply when hot swapping parts.

3. Follow the guidelines provided in “Preventing Electrostatic Discharge” on the following page.

4. Disconnect any telephone or telecommunications lines from the computer.

In addition, take note of these safety guidelines when appropriate:  To help avoid possible damage to system boards, wait five seconds after

turning off the computer before removing a component, removing a system board, or disconnecting a peripheral device fr om the co mpu ter.

 When you disconnect a cable, pull on its connector or on its strain-relief loop,

not on the cable itself. Some cables have a connector with locking tabs. If you are disconnecting this type of cable, press in on the locking tabs before disconnecting the cable. As you pull connectors apart, keep them evenly aligned to avoid bending any connector pins. Also, before connecting a cable, make sure both connectors are correctly oriented and aligned.

CAUTION

Do not attempt to service the system yourself except as explained in this user’s guide. Follow installation and troubleshooting instructions closely.

 Preventing E lectrostatic Discharge

Static electricity can harm system boards. Perform service at an ESD workstation and follow proper ESD procedure to reduce the risk of damage to components. Quanmax strongly encourages you to follow proper ESD procedure, which can include wrist straps and smocks, when servicing equipment. You can also take the following steps to prevent damage from electrostatic discharge (ESD):  When unpacking a static-sensitive component from its shipping carton, do not

Safety Instructions

QutePC-4100 Series User’s Manual

remove the compon ent ’s antistatic packing material until you are ready to install the component in a computer. Just before unwrapping the antistatic packaging, be sure you are at an ESD workstation or grounded. This will discharge any static electricity that may have built up in your body.

 When transporting a sensitive component, first place it in an antistatic container

or packaging.

 Handle all sensitive components at an ESD workstatio n. If possible, use

antistatic floor p ads and workbench pads.

 Handle components and boards with care. Don’t touch the components or

contacts o n a b oard. Hol d a b oard by it s edg es or by it s met al mount ing bracke t .

 Do not handle or store system boards near str ong elect ros ta tic, el ectromag neti c,

magnetic, or radioactive fields.

 Instructions for Lithium Battery

WARNING

Danger of explosion when battery is replaced with incorrect type. Only repl ace with the same or equivalent type recommended by the manufacturer.

Do not dispose of lithium batteries in domestic waste. Dispose of the battery according to the local regulations dealing with the disposal of these special materials (e.g. to the collecting points for disposal of batteries)

 Voltage Ratings

The external power adaptor of the QutePC-4100 series has the following voltage ratings:

 Input: 100-240 VAC, 50-60 Hz  Output: 40W, +19VDC/ 2.1A output

Preface

QutePC-4100 Series User’s Manual

Preface

 How to Use Thi s Guide

This guide is designe d to be used as st ep-by-step instructions for installati on, and a s a reference for operation, troubleshooting, and upgrades.

NOTE

Driver downloads and additional information are available under Downloads on our web site: www.quanmax.com.

 Unpacking

When unpacking, follow these steps:

1. After opening the box, save it and the packing material for possible future

shipment.

2. Remove all items from the box. If any items listed on the purchase order

are missing, notify Quanmax customer service immediately.

3. Inspect the product for damage. If there is damag e, notify Quanmax

customer service immediately. Refer to “Warranty Policy” for the return procedure.

 Regulatory Compliance Statements

This section provides the FCC compliance statement for Class A devices.

FCC Compliance Statement:

This equipment has been tested and found to comply with limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reason able protection against harmful interference in residential installations. This equipment generates, uses, and can radiate radiofrequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause

Preface

QutePC-4100 Series User’s Manual

interference to radio or television equipment reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the equipment and receiver.  Connect the equipment to an outlet on a circuit different from that to which the

receiver is connected.

 Consult the dealer or an experienced radio/TV tech ni ci an f or help.

Changes or modific atio ns not expr essly appr oved by Quanm ax co uld voi d the us er's authority to operate the equipment.

NOTE

The assembler of a personal computer system may be required to test the system and/or make necessary modifications if a system is found to cause harmful interference or to be noncompliant with the appropriate standards for its intended use.

 Warranty Policy

Limited Warranty

Quanmax Inc.’s detailed Limited Warranty policy can be found under Support at www.quanmax.com. Please consult your distributor for warranty verification. The limited warranty is void if the product has been subjected to alteration, neglect, misuse, or abuse; if any repairs have been attempted by anyone other than Quanmax or its au thor ized agent; or if the failure i s caused by accident, acts o f God , or other causes beyond the control of Quanmax or the manufacturer. Neglect, misuse, and abuse shall include any installation, operation, or maintenance of the product other than in accordance with the user’s guide. No agent, dealer, distributor, service company, or other party is authorized to change , modify, or extend the terms of this Limited Warranty in any manner whatsoever. Quanmax reserves the right to make changes or improvements in any product without incurring any obligation to similarly alter products previously purchased.

Return Procedure

For any Limited Warranty return, please contact Support at www.quanmax.com and login to obtain a Return Material Authorization (RMA) Number. If you do not have an

Preface

QutePC-4100 Series User’s Manual

account, send an email to support@quanmax.com to apply for one. All product(s) returned to Quanmax for service or credit must be accompanied by a Return Material Authorization (RMA) Number. Freight on all returned items must be prepaid by the customer who is responsible for any loss or damage caused by common carrier in transit. Returns for Warranty must include a Failure Report for each unit, by serial number(s), as well as a copy of the original invoice showing the date of purchase. To reduce risk of damage, returns of product must be in a Quanmax shipping container. If the original container has been lost or damaged, new shipping containers may be obtained from Quanmax Customer Service at a nominal cost. Quanmax owns all parts removed from repaired products. Quanmax uses new and reconditioned parts made by various manufacturers in performing warranty repairs and building replacement products. If Quanmax repairs or replaces a product, its warranty term is not extended. Shipments not in compliance with this Limited Warranty Return Policy will not be accepted by Quanmax.

Limitation of Liability

In no event shall Quanmax be liable for any defect in hardware, software, loss, or inadequacy of data of any kind, or for any direct, indirect, incidental, or consequential damages in connection with or arising out of the performance or use of any product furnished hereunder. Quanmax’s liability shall in no event exceed the purchase price of the product pur ch ased hereunder. Th e for eg oi ng limi t a t ion of liability shall be equally applicable to any service provided by Quanmax or its authorized agent.

 Maintainin g Your Computer

Environmental Factors

 Temperature

The ambient temperature within an enclosure may be greater than room ambient temperature. Installation in an enclosure should be such that the amount of air flow required for safe operation is not compromised. Consideration should be given to the maximum rated ambient temperature. Overheating can cause a variety of problems, including premature aging and failure of chips or mechanical failure of devices. If the system has been exposed to abnormally cold temperatures, allow a two-hour warm-up period to bring it up to normal operating temperature before

Preface

QutePC-4100 Series User’s Manual

turning it on. Failure to do so may cause damage to internal components, particularly the hard disk drive.

 Humidity

High-humidity can cause moisture to enter and accumulate in the system. This moisture can cause corrosion of internal components and degrade such properties as electrical resistance and thermal conductivity. Extreme moisture buildup inside the system can result in electrical shorts, which can cause serious damage to the sy stem. Buildings in which climate is controlled usually maintain an acceptable level of humidity for system equipment. However, if a system is located in an unusually humid location, a dehumidifier can be used to maintain the humidity within an acceptable range. Refer to the “Specifications” section of this user’s guide for the operating and storage humidity specifications.

 Altitude

Operating a system at a high altitude (low pressure) reduces the efficiency of the cooling fans to cool the system. This can cause electrical problems related to arcing and corona effects. This condition can also cause sealed components with internal pressure, such as electrolytic capacitors, to fail or perform at reduced efficiency.

Power Protection

The greatest threats to a system’s supply of power are power loss, power spikes, and power surges caused by electrical storms, which interrupt system operation and/or damage system components. To protect your system, always properly ground power cables and one of the following devices.

 Surge Protector

Surge protectors are available in a variety of types and usually provide a level of protection proportional with the cost of the device. Surge protectors prevent voltage spikes from entering a system through the AC power cord. Surge protectors, however, do not offer protection against brownouts, which occur when the voltage drops more than 20 percent below the normal AC line voltage level.

 Line Conditioner

Line conditioners go beyond the overvoltage protection of surge protectors.

Preface

QutePC-4100 Series User’s Manual

Line conditioners keep a system’s AC power source voltage at a fairly constant level and, therefore, can handle brownouts. Because of this added protection, line conditioners cost more than surge protectors. However, line conditioners cannot protect against a compl et e loss o f pow er.

 Uninterruptible Power Supply

Uninterruptible power supply (UPS) systems offer the most complete protection against variations on power because they use battery power to keep the server running when AC power is lost. The battery is charged by the AC power while it is available, so when AC power is lost, the battery can provide power to the system for a limited amount of time, depending on the UPS system. UPS systems range in price from a few hundred dollars to several thousand dollars, with the more expensive unit s allowing you to run larger systems for a longer period of time when AC power is lost. UPS systems that provide only 5 minutes of battery power let you conduct an orderly shutdown of the system, but are not intende d to pr ovi de contin ue d oper ation. Sur ge pr otect ors shoul d be used with all UPS systems, and the UPS system should be Underwriters Laboratories (UL) safety approved.

Chapter 1

QutePC-4100 Series User’s Manual

Chapter 1

Introduction

 Overview

The QuteP C-4100 Series is a Box PC with a volume of just 0.6-liter that is ideal for space critical applications. This embedded hardware platform is designed with Intel® 3rd generation Core i3-3227U Processor which provides the excellent performance. System is supported with Intel® HM76 Express chipset, and DDR3 SO-DIMM up to 8GB. Featured are 1x 2.5” SATA HDD, 2x GbE, 4x USB3.0, 2x USB2.0, HDMI, 2xDP.

Checklist

 QutePC-4100 Series  Power Adapter  Power Cord  Driver CD  Quick installation Guide  VESA Mounting Kit (optional)  Wireless LAN , 3G (optional)

Features

 Intel® 3rd generation Core i3-3227U Processor  Intel® HM76 Express Chipset  Support DDR3 1333 / 1600 MHz SO-DIMM up to 8 GB  Support 1x 2.5” SATA HDD / SSD  Support 2xGbE,4xUSB3.0, 2x USB2.0 and S/PDIF  Support 1xHDMI, 2xDP

Chapter 1

QutePC-4100 Series User’s Manual

 Product Specifications

Construction Plastic Casing System Board

Intel® 3rd generation Core i3-3227U Processor

Intel® HM76 Express Chipset

Memory

QutePC-4100 : 1x DDR3 SO-DIMM up to 4GB

QutePC-4101 : 1x DDR3 SO-DIMM up to 2GB

QutePC-4102 : 1x DDR3 SO-DIMM up to 2GB

I/O Panel

■

Front I/O panel

1x Push button (w/LED) for power on/off 1x WiFi LED 1x HDD LED 2x USB2.0 4x USB3.0 1x S/PDIF

■ Rear I/O panel 1x DC JACK 2x RJ-45, GbE ports 2x DP 1x HDMI 1x 3G Antenna ( Optional )

1x Clear CMOS

Storage

QutePC-4100 : 1x 500GB 2.5” SATA HDD

QutePC-4101 : 1x 320GB 2.5” SATA HDD

QutePC-4102 : 1x 32GB 2.5” SATA SSD

Wifi 802.11b/g/n

Power Supply

Input: 100-240 VAC, 50-60 Hz Output: 40W, +19VDC / 2.1A output

Cooling System Fan

Temperature /

Humidity

Operating: 0°C to 40°C, 0%-90%, non-condensing Storage: -20°C to 80°C, 0%-90%, non-condensing

Dimensions 130 x 38.5 x 115.86 mm (WxHxD)

Weight

550 g

Others

Kensington Lock Support

Mounting

VESA mount, Desktop stand

Certifications

CE, FCC Class A

Table 1 QutePC-4100 series product specifications

Chapter 1

QutePC-4100 Series User’s Manual

 System tour

Refer to the diagrams below to identify the components of the system.

 Front Panel

Figure 1 Front Panel

USB

The USB (Universal Serial Bus) port is compatible with USB devices such as keyboards, mouse devices, cameras, and hard disk drives. USB allows many devices to run simultaneously on a single computer, with some peripheral acting as additional plug-in sites or hubs.

WiFi LED

The WiFi LED will light when the WiFi is on.

HDD LED

The hard disk LED blinks when data is being written into or read from the HDD.

S/PDIF

S/PDIF output for carrying digital audio signals out to the device.

Power Switch

The power switch allows powering ON and OFF the system.

Chapter 1

QutePC-4100 Series User’s Manual

 Rear Panel

Figure 2 Rear Panel

Ethernet

The eight-pin RJ-45 LAN port supports a standard Ethernet cable for connection to a local netw or k.

DC Jack

The supplied power adapter converts AC power to DC for use with this jack. Power supplied through this jack supplies power to the PC. To prevent damage to the PC, always use the supplied power adapter.

Kensington Lock Slot

The slot is used for attaching a lock-and-cable apparatus. Locks are generally secured in place with a key or combination lock attached to a rubberized metal cable.

DP is a display interface used to connect a video source to a display device such as a computer monitor or a television set.

HDMI

HDMI connector for display outpu t

Chapter 1

QutePC-4100 Series User’s Manual

Wireless

1x reserved holes for wireless antenna connections.

Clear CMOS

1x reset button for clear CMOS.

Chapter 1

QutePC-4100 Series User’s Manual

Mechanical Dimensi ons

130 x 38.5 x 115.86 mm (WxHxD)

Figure 3 Mechanical Dimensions

Chapter 2

QutePC-4100 Series User’s Manual

HDMI

Chapter 2

Getting Started

 Setting up your PC

 Connecting the monitor

 Connect the DP/ HDMI cable from your display to the DP/ HDMI port.

Figure 4 DP/ HDMI

Chapter 2

QutePC-4100 Series User’s Manual

 Connecting USB mouse & ke yboard

Your QutePC-4100 series does not come with a keyboard and mouse, but you can use any USB keyboard or mouse with your computer.

Figure 5 Connecting USB mouse & keyboard

NOTE

Using a third-party USB mouse or keyboard may require software drivers. Check the manufacturer ’s website for the latest software drivers.

USB 3.0

USB 2.0

Chapter 2

QutePC-4100 Series User’s Manual

RJ45

DC Jack

 Connecting to a network device

Connect one end of a network cable to the LAN port on the system r ear panel and the other end to a hub or switch.

Figure 6 RJ45 connector

 Turning on the system

1. Connect the power adapter cable to the DC jack (DC IN) of the QutePC-4100 series

2. Connect the power cable to the power adapter

3. Connect the power cable to a power outlet

4. Press the power switch on the front panel to turn on the system

Figure 7 Turning on the system

On/Off

Chapter 2

QutePC-4100 Series User’s Manual

 Mounting your PC to a monitor

1. Secure the VESA mounting kit to your monitor with four screws.

NOTE

To fasten the metal shelf, your monitor must comply with VESA75 or VESA100 standard. The VESA mounting kit is optional.

2. Place the QutePC-4100 series on the VESA mounting brack et a nd make

sure the bracket is hooked with the fins of the system housing.

3. Secure the screw with the VESA mounting bracket and make sure the

QutePC-4100 series is solidly secured to the display.

Figure 8 VESA mounting

NOTE

When mounting the unit on the wall with a display. The total weight of the

unit and display won’t exceed 7 Kg.

Chapter 2

QutePC-4100 Series User’s Manual

K Lock

 Anti-theft protection with a Kensingt on Lock

The QutePC-4100 series has a Kensington lock slot for the Kensington MicroSaver . With the Kensington MicroSaver, a sturdy steel cable, you can attach your QutePC-4100 series to a stationary object and protect your PC from theft.

Figure 9 Use a Kensington lock

Chapter 3

QutePC-4100 Series User’s Manual

Chapter 3

AMI BIOS Setup

 Overview

This chapter provides a description of the AMI BIOS. The BIOS setup menus and available selectio ns may vary from t hose o f your prod uct. F or specific information on the BIOS for your product, please contact Quanmax.

NOTE: The BIOS m enus and selections for your product may vary from those in this chapter. For the BIOS manual specific to your product, please contact Quanmax

AMI's ROM BIOS provides a built-in Setup prog r am, which allows the user to modify the basic system configuration and hardware parameters. The modified data will be stored in a battery-backe d CM OS, so th at da t a w il l be r et aine d ev en when t he p ow er is turned off. In general, the information saved in the CMOS RAM will not need to be changed unless there is a configuration change in the system, such as a hard drive replacement or when a device is added. It is possible for the CMOS battery to fail, which will cause data loss in the CMOS only. If this happens you will need to reconfigure your BIOS settings.

Chapter 3

QutePC-4100 Series User’s Manual

 Main Menu

The BIOS Setup is accessed by pressing the DEL key after the Power-On Self-Test (POST) memory t est b eg ins an d be fore the o perat ing sy st em boot beg ins. Onc e yo u enter the BIOS Setup Utility, the Main Menu will appear on the screen. The Main Menu provides System Ov ervi ew informa tion and allow s y ou to se t the Sy st em Time and Date. Use the “<” and “>” cursor keys to navigate between menu screens.

Table 2 BIOS Main Menu

BIOS SETUP UTILITY

Main Advanced Boot Security Save & Exit

Product Information

  Select Screen ↑↓ Select Item Enter: Select +- Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4 Save & Exit ESC Exit

Product Name QutePC-4100 Series

BIOS Version 0.04 (x64)

BIOS Build Date 03/28/2013

ME FW Version 8.0.20.1513

CPU Information

Intel® i3-3227U@1.80GHz

Microcode Revision 17

Processor Cores 2

Memory Information Total Size 2048 MB (DDR3)

Frequency 1333 MHz System date [Tue 01/01/2013] System time [00:05:23] Access Level Administrator

Chapter 3

QutePC-4100 Series User’s Manual

 Advanced Me nu

Table 3 Advanced Menu

BIOS SETUP UTILITY

Main Advanced Boot Security Server Mgmt Save & Exit

Onboard LAN 1 Controller [Enabled]   Select Screen

↑↓ Select Item Enter: Select +- Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4 Save & Exit ESC Exit

Onboard LAN 1 Boot [Disabled]

Onboard LAN 2 Controller [Enabled]

Onboard LAN 2 Boot [Disabled] Audio Controller [Enabled]

> Display Configuration

> Power Management Configuration > CPU Advanced Configuration

> SATA Configuration

> Intel(R) Rapid Start Technology > USB Configuration

> H/W Monitor

Onboard LAN 1 Controller

Options: Disabled, Enabled

Onboard LAN 1 Boot

Options: Disabled, Enabled

Onboard LAN 2 Controller

Options: Disabled, Enabled

Onboard LAN 2 Boot

Options: Disabled, Enabled

Audio Controller

Options: Disabled, Enabled

Chapter 3

QutePC-4100 Series User’s Manual

Table 4 Advanced Menu – Display Config urati on

BIOS SETUP UTILITY

Main Advanced Boot Security Server Mgmt Save & Exit

Display Configuration   Select Screen

↑↓ Select Item Enter: Select +- Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4 Save & Exit ESC Exit

Aperture Size [256 MB] DVMT Pre-Allocated [64 MB]

DVMT Total Gfx Mem [256 MB]

IGFX – Boot Type

[ VBIOS Default]

Aperture Size

Options: 128MB, 256M B, 512M B

DVMT Pre-Allocated

Options: 32 M, 64 M, 96 M, 128MB, 160 M, 192 M, 22 4 M, 256MB, 288 M,

320 M , 352 M , 384 M , 416 M , 448 M , 480 M , 512M , 1024M

DVMT Total Gfx Mem

Options: 128MB, 256M B, MAX

IGFX-Boot Type

Options: VBIOS Default, DP1,DP2, HDMI

Chapter 3

QutePC-4100 Series User’s Manual

Table 5 Advanced Menu –Power Management Configuration

BIOS SETUP UTILITY

Main Advanced Boot Security Server Mgmt Save & Exit

Power Management Configuration   Select Screen

↑↓ Select Item Enter: Select +- Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4 Save & Exit ESC Exit

ACPI Sleep State [S3 (Suspend to RAM)] Restore AC Power Loss [Power Off]

Resume By PCIE Device [Disabled] Resume By RTC Alarm [Disabled]

EUP Power Saving Mode [Disabled] >Watchdog Timer Configuration

ACPI Sleep State

Options: Suspend Disabled, S1 (CPU Stop Clock), S3 (Suspend to RAM)

Restore AC Power Loss

Options: Power Off, Power On, Last State

Resume By PCIE Device

Options: Disabled, Enabled

Resume By RTC Alarm

Options: Disabled, Enabled

EUP Power Saving Mode

Options: Disabled, Enabled

Watchdog Timer Configuration

■ WDT Function 【Disabled】

Options: Disabled, Enabled

Chapter 3

QutePC-4100 Series User’s Manual

Table 6 Advanced Menu –CPU Advanced Configuration

BIOS SETUP UTILITY

Main Advanced Boot Security Save & Exit

CPU Advanced Configuration   Select Screen

↑↓ Select Item Enter: Select +- Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4 Save & Exit ESC Exit

EIST

[Enabled]

Active Processor Cores

[ALL]

Limit CPUID Maximum

[Disabled]

Execute Disable Bit [Enabled] Intel Virtualization Technology [Disabled]

EIST

Options: Disabled, Enabled

Active Processor Cores

Options: All, 1

Limit CPUID Maximum

Options: Disabled, Enabled

Execute Disable Bit

Options: Disabled, Enabled

Intel Virtualization Technology

Options: Disabled, Enabled

Chapter 3

QutePC-4100 Series User’s Manual

Table 7 Advanced Menu –SATA Configuration

BIOS SETUP UTILITY

Main Advanced Boot Security Save & Exit

SATA Controller(s)

[Enabled]

  Select Screen

↑↓ Select Item Enter: Select +- Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4 Save & Exit ESC Exit

SATA Mode Selection [ AHCI] SATA Controller Speed [ Default]

Serial ATA Port 0 Empty

Software Preserve Port 0

SATA Device Type

Unknown

[ Enabled ]

[ Hard Disk Driver]

SATA Controller(s)

Options: Disabled, Enabled

SATA Mode Selection

Options: IDE, AHCI

SATA Controller Speed

Options: Default, Gen 1, Gen 2 , Gen 3

Port 0

Options: Disabled, Enabled

SATA Device T ype

Options: Hard Disk Driver, Solid State Driver

Table 8 Advanced Menu –Intel (R) Rapid Start Technology

BIOS SETUP UTILITY

Main Advanced Boot Security Save & Exit

Intel (R) Rapid Start Technology [Disabled]

Intel (R) Rapid Start Technology

Options: Disabled, Enabled

Chapter 3

QutePC-4100 Series User’s Manual

Table 9 Advanced Menu –USB Configuration

BIOS SETUP UTILITY

Main Advanced Boot Security Save & Exit

USB Configuration   Select Screen

↑↓ Select Item Enter: Select +- Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4 Save & Exit ESC Exit

USB Devices:

1 Keyboard, 1 Mouse, 2 Hubs

Legacy USB Support [Enabled] USB3.0 Support [Enabled] xHCI Hand-off [Enabled]

EHCI Hand-off [Disabled] USB Mass Storage Driver Support [Enabled]

xHCI Pre-Boot Driver [Enabled] xHCI Mode [ Smart Auto]

Legacy USB Support

Options: Disabled, Enabled, Auto

USB3.0 Support Options: Disabled, Enabled xHCI Hand-off

Options: Disabled, Enabled EHCI Hand-off

Options: Disabled, Enabled USB Mass Storage Driver Support Options: Disabled, Enabled xHCI Pre-Boot Driver Options: Disabled, Enabled xHCI Mode

Options: Smart Auto, Auto, Disabled, Enabled

Chapter 3

QutePC-4100 Series User’s Manual

Table 10 Advanced Menu –H/W Monitor

BIOS SETUP UTILITY

Main Advanced Boot Security Save & Exit

PC Health Status

  Select Screen ↑↓ Select Item Enter: Select +- Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4 Save & Exit ESC Exit

CPU Warning Temperature

[Disabled]

CPU FAN Configuration

CPU Temperature

: +55 C

Memory Temperature : +36 C System Temperature : +42 C CPU FAN Speed N/A

+VCORE

: +0.736V

+VIN : +19.447V

5V : +5.044V

+1.05V

: +1.056V

+3.3VSB

: +3.376V

+3.3V

: +3.312V

VBAT : +3.344V

CPU Warning Temperature

Options: Disabled, 80 ºC , 85 ºC, 90 ºC, 95 ºC

CPU FAN Configuration

FAN Setting 【Manual Mode】(Options: Smart FAN, Manual Mode) Manual Duty 255

Chapter 3

QutePC-4100 Series User’s Manual

 Boot Menu

Table 11 Boot Menu

BIOS SETUP UTILITY

Main Advanced Boot Security Save & Exit

Boot Configuration

  Select Screen ↑↓ Select Item Enter: Select +- Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4 Save & Exit ESC Exit

Full Screen LOGO Display

[Disabled] Setup Prompt Timeout

Bootup NumLock State [On] UEFI Boot [Disabled]

Boot Option Priorities

Full Screen LOGO Display

Options: Disabled, Enabled

Bootup Numlock State

Options: On, Off

UEFI Boot

Options: Disabled, Enabled

Chapter 3

QutePC-4100 Series User’s Manual

 Security Menu

Table 12 Security Menu

BIOS SETUP UTILITY

Main Advanced Boot Security Save & Exit

Password Description

If ONLY the Administra tor’s password is set, then this only limits access to Setup and is only asked for when entering Setup

If ONLY the User’s password is set, then this is a power on password and must be entered to boot or enter Setup. In Setup the User will have Administrator rights

The password length must be in the following range:

Minimum Length 3 Maximum length 20

Administrator Password

User Password

  Select Screen ↑↓ Select Item Enter: Select +- Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4 Save & Exit ESC Exit

 Save & Exit Menu

Table 13 Save & Exit Men u

BIOS SETUP UTILITY

Main Advanced Boot Security Save & Exit

Save Changes and Reset Discard Changes and Reset

Save Options Save Changes Discard Changes

Restore Defaults

  Select Screen ↑↓ Select Item Enter: Select +- Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4 Save & Exit ESC Exit

Chapter 3

QutePC-4100 Series User’s Manual

Save Changes and Exit

Exit system setup after saving the changes. Once you are finished making your selections, choose this option from the Exit menu to ensure the values you selected are saved to the CMOS RAM. The CMOS RAM is sustained by an onboard backup battery and stays on even when the PC is turned off. When you select this option, a confirmation window appears. Select [Yes] to save changes and exit.

Discard Changes and Exit

Exit system setup without saving any changes. Select this option only if you do not want to save the changes that you made to the Setup program. If you made changes to fields other than system date, system time, and password, the BIOS asks for a confirmation before ex iti ng .

Discard Changes

Discards changes done so far to any of the setup values. This option allows you to discard the selections you made and restore the prev i ousl y saved values. After selecting this optio n, a con firmation a ppears. Select [Y es] to discar d any changes and load the previously saved values.

Load Optimal Defaults

Load Optimal Default values for all the setup values. This option allows you to load optimal default values for each of the parameters on the Setup menus, which will provide the best performance settings for your system. The F9 key can be used for this operation.

Load Failsafe Defaults

Load Optimal Default values for all the setup values. This option allows you to load failsafe default values for each of the parameters on the Setup menus, which will provide the most stable performance settings. The F8 key can be used for this operation.

Chapter 4

QutePC-4100 Series User’s Manual

Chapter 4

Driver Installation

If your QutePC-4100 series does not come with an operating system pre-installed, you will need to install an operating system and the necessary drivers to operate it. After you have finished assembling your system and connected the appropriate power source, power it up using the power supply and install the desired operating system. You can download the drivers for the QutePC-4100 from the Quanmax website at www.quanmax.com and install as instructed there. For other operating systems, please contact Quanmax.

Quanmax QutePC-4100 Series, QutePC-4200 Series, QutePC-4000 Series, QutePC-4101, QutePC-4102 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual