Page 1
IBEW
1031
LU
SYSTEM6VP
Paging Horn Speaker System
25/70V, Color Coded Leads
SURFACE MOUNTED LOUDSPEAKER ASSEMBLY
GENERAL DESCRIPTION
The SYSTEM 6VP is a complete loudspeaker assembly with double
re-entrant horn, compression type loudspeaker, 16W- 25/70.7V
transformer, 16 gage square steel ba e and enclosure. Mounting
hardware is #8-32 ’pin-in-torx’.
Finish: White baked epoxy hybrid.
SYSTEM COMPONENTS
Loudspeaker H16
Transformer Integral to unit
Ba e BS8WS
Enclosure SE1WVP
25/70V 16W- 5 tap Color coded leads
(16W, 8W, 4W, 4W, 1W)
AUDIO SPECIFICATIONS
Average Sensitivity 110 dB-SPL 1W/1M
Loudspeaker Power Rating 16W RMS EIA 426A Standard
Calculated Maximum
System Output
Frequency Response 350 Hz - 10 kHz EIA 426A Standard
Nominal Coverage Angle
Audio Connection Pre-cut 7” color coded leads
121 dB-SPL 5W/1M
90° included angle -6 dB/ 2 kHz,
half space
INTENDED USE
Indoor or protected outdoor environment, vertical or horizontal
surface mount.
Program Material: Voice and signal tone.
Recommended construction sequences, installation instructions and A&E Speci cations are available in various
formats in the QUAM Architects’ and Engineers’ Resources section on the web at: www.QuamSpeakers.com
QUAM-NICHOLS COMPANY
234 East Marquette Road, Chicago IL 60637
Phone: (800) NEED NOW Fax: (888) NEED NOW
(800) 633-3669 (888) 633-3669
E-Mail: NeedNow@QNC.com www.QuamSpeakers.com
© 2012 Quam-Nichols Company, Quam- Nichols reserves the right to make changes and/or improvements to its products at any time and without notice. T0102_SYSTEM6VP_12SE01
Since 1930
Loading...