0104.5 - LAY-IN CEILING MOUNT (TILE REPLACEMENT)
SYSTEM 12/8
8-Ohm
TYPE G
01
23-13/16
23-13/16
SYSTEM 12 Shown
GENERAL DESCRIPTION
The Quam SYSTEM 12/8 is a complete loudspeaker assembly,
with 8” frame, perforated steel baffle and integral back box;
system impedance is nominal 8 Ohms.
Finish options: White or black baked epoxy hybrid.
INTENDED USE
Indoor environment, mounted parallel to floor plane in a 24”
wide suspended ceiling tile grid.
Program Material: Signal tones, voice and music.
UL Listed 1480 (Type G)- As a General Signaling Device:
Used in conjunction with a compatible listed recording and reproducing equipment; installation and application compliant
with requirements of NEC and AHJ.
CITY of CHICAGO APPROVED- Material and construction permits use where ceiling plenum is part of the air handling system.
SYSTEM COMPONENTS:
Loudspeaker 8C5PAX
Finish options Order as SYSTEM 12/8/B
Black only
3-7/16
CITY of CHICAGOAPPROVED
AUDIO SPECIFICATIONS:
Speaker Size 8” frame
Average Sensitivity 92 dB-SPL, 1W/ 1M
Loudspeaker Power 12W RMS, EIA 426A Standard
Rating
Calculated Maximum 103 dB-SPL, 12W / 1M
System Output
Magnet Type, Weight BeFe Ceramic, 4.8 oz. Nominal
Frequency Response 42 Hz - 17 kHz EIA 426A Standard
Nominal 100° Included angle, -6dB
Coverage Angle 2 kHz, half space
Audio Connection 7” long, labeled tinned wires,
pre-cut
Recommended construction sequences, installation instructions and A&E
Specifications are available in various formats on the Quam Architects’ and
Engineers’ Resources CD or on the web at: www.quamspeakers.com
LOUDSPEAKER ASSEMBLIES
Quam-Nichols Company
234 East Marquette Road, Chicago, IL 60637
Phone: (800) NEED NOW Fax: (888) NEED NOW
(800) 633 - 3669 (888) 633 - 3669
E-Mail: neednow@qnc.com www.quamspeakers.com
© 2009 Quam-Nichols Company Quam-Nichols reserves the right to make changes and/or improvements to its products at any time and without notice. TSYSTEM12/8_09JY23
LU
IBEW
1031
Since 1930
Loading...