Quam SYSTEM 12 Installation Guide
TIE-OFF
TAB 4X
No cung required
Cut le in half along 2’ axis
other
than what is provided with product.
A) Loosen, but do not remove screws on cover plate; push up
and remove plate from assembly.
B) Install UL
flex whip.
C) Feed supply cable through whip to connector. Make
insulate all unused
taps from each other and enclosure. When cover plate is
LOUDSPEAKER ASSEMBLIES
SYSTEM 12
INSTALLATION INSTRUCTIONS
Brown 5W @ 25V only
Red 2.5W @ 25V only
8Ω
Orange 1.25W @ 25V only
Green 0.63W @ 25V or 5W @ 70.7V
White 0.32W @ 25V or 2.5W @ 70.7V
Blue only 1.25W @ 70.7V
Gray only 0.63W @ 70.7V
Violet only 0.32W @ 70.7V
BLACK ( Common )
INCLUDED TRANSFORMER :
TBLU
inside of the enclosure.
A) Place assembly onto ceiling grid, install 24” T-bar trim piece
where required (furnished only with specific 1’x2’ formats).
NOTE! AHJ/ local codes may require . Bend up
NOTE! AHJ/ local codes may require .
Recommended fasteners; not supplied: Erico/Caddy part ATA4i
and 1/4”-20 x 2” bolt, or equivalent. Install as directed.
www.QuamSpeakers.com
© 2014 Quam-Nichols Company reserves the right to make changes and/or
improvements to its products at any
me and without no ce.
QUAM-NICHOLS COMPANY, INC.
234 East Marque e Rd.
Chicago, IL. 60637
Tel: 1-800-NEED-NOW (800-633-3669)
Fax: 1-888-NEED-NOW (888-633-3669)
e-mail: NeedNow@QNC.com
www.QuamSpeakers.com
Loading...