Page 1
THESE DRAWINGS ARE THE PROPERTY OF QUALTEK
ELECTRONICS AND NOT TO BE REPRODUCED FOR
OR COMMUNICATED TO A THIRD PARTY WITHOUT
THE EXPRESS WRITTEN PERMISSION OF AN OFFICER
OF QUALTEK ELECTRONICS.
1. PHYSICAL DIMENSIONS
65.7REF.
29.5 ± 0.5
50.7MAX.
40.0 ± 0.5
Ø3.3 ± 0.2
62.5MAX.
66.0MAX.
59.5MAX.
R2.5MAX.
60.0 ± 1.0
14.5 ± 1.0
56.0MAX.
M3
REVISION
REV.
B RoHS Compliancy
06-01-06
APPROVEDDATEDESCRIPTION
DP
ELECTRICAL CHARACTERISTICS:
1-1. VOLTAGE RATING...................................115/250VAC
1-2. CURRENT RATING
A. @ 115 VAC..........................................1 A RMS MAX
B. @ 250 VAC.........................................1 A RMS MAX
1-3. OPERATING FREQUENCY......................50/60Hz
1-4. LEAKAGE CURRENT: EACH LINE TO GROUND
A. @ 115 VAC 60Hz............................0.20 mA MAX
40.0 ± 0.1
B. @ 250 VAC 50Hz.............................0.40 mA MAX
1-5. HIPOT RATING (FOR ONE MINUTE)
A. LINE TO GROUND...........................2250 VDC
B. LINE TO LINE.....................................1450 VDC
1-6. MINIMUM INSERTION LOSS IN dB: (AT 50 OHM SYSTEM)
.15
.50
1.0
5.0
FREQ. MHz
COM. MODE dB
DIF. MODE dB
.01
10
.10
.05
28
40
25
20
10
8
2
/
40
20
28
10
30
35
35
35
35
38
35
28.7MAX.
1-7. OPERATING TEMPERATURE.................-25° TO +85° C
1-8. SAFETY:
1-9. USE 5X20mm FUSE
1-10. RoHS COMPLIANT
2. ELECTRICAL SCHEMATIC
L: 7.5mH
C1: 0.22uF
C2: 2200pF
R: 1.0MΩ
Dim
range
(mm)
0-1
1-6
6-18
18-50
50-120
120-250
250-500
Tolerance
+/-
(mm)
0.15
0.20
0.30
0.50
0.70
0.90
1.20
CONTROLLED
Qualtek Electronics Corp.
PPC DIVISION
Part Number:
Description:
Drawn / Date
B.ZHANG
03-18-04
880-01/004
EMI FILTER
UNIT: mm
Checked / Date
03-18-04
REV. B
Approved / Date
JJH / 03-18-04
Loading...