Page 1
THESE DRAWINGS ARE THE PROPERTY OF QUALTEK
ELECTRONICS AND NOT TO BE REPRODUCED FOR
OR COMMUNICATED TO A THIRD PARTY WITHOUT
THE EXPRESS WRITTEN PERMISSION OF AN OFFICER
OF QUALTEK ELECTRONICS.
PHYSICAL DIMENSIONS:
2.38 ± 0.02
Ø0.188 ± 0.02 (2X)
#8-32 0.25 DEP.
2.02MAX.
LABEL
REVISION
REV.
B RoHS Compliancy
06-01-06
APPROVEDDATEDESCRIPTION
DP
ELECTRICAL CHARACTERISTICS:
1-1. VOLTAGE RATING...................................115/250VAC
1-2. CURRENT RATING
A. @ 115 VAC..........................................20 A RMS MAX
B. @ 250 VAC.........................................20 A RMS MAX
1-3. OPERATING FREQUENCY......................50/60Hz
1-4. LEAKAGE CURRENT: EACH LINE TO GROUND
A. @ 115 VAC 60Hz............................0.25 mA MAX
B. @ 250 VAC 50Hz.............................0.45 mA MAX
3.10 MAX.
1.77 MAX.
1-5. HIPOT RATING (FOR ONE MINUTE)
A. LINE TO GROUND...........................2250 VDC
B. LINE TO LINE.....................................1450 VDC
1-6. MINIMUM INSERTION LOSS IN dB: (AT 50 OHM SYSTEM)
.15
.50
1.0
5.0
FREQ. MHz
COM. MODE dB
DIF. MODE dB
.01
.10
.05
13
20
/
/
/
15
/
/
/
25
24
28
10
30
40
45
48
50
48
48
SCHEMATIC:
2.77 MAX.
1.18MAX.
L: 0.7mH
C1: 0.33uF
C2: 3300pF
Dim
range
(mm)
0-1
1-6
6-18
18-50
50-120
120-250
250-500
1-7. OPERATING TEMPERATURE.................-25° TO +85° C
1-8. SAFETY:
1-9. RoHS COMPLIANT
CONTROLLED
Tolerance
+/-
(mm)
0.15
0.20
0.30
0.50
0.70
0.90
1.20
Qualtek Electronics Corp.
PPC DIVISION
Part Number:
Description:
Drawn / Date
B.ZHANG
01-17-03
851-20/011
EMI FILTER
UNIT: in
Checked / Date
01-17-03
REV. B
Approved / Date
JJH / 01-17-03
Loading...