6’ ALUMINUM
ULTRA PRO SERIES
ROLLING SCAFFOLD
operational safety and
assembly instructions
Warranty
Guardian Fall Protection expressly warrants to the purchaser that all products are free from defect in material and workmanship at the
time of shipment.
Guardian Fall Protection’s obligation under this warranty is limited to product replacement for a period of two (2) years from either (i) the
date of first installation or use of the product or (ii) shipment to the purchaser, whichever period expires first. This warranty is not transferable.
No other person or firm is authorized to assume or assign for Guardian Fall Protection any other liability in connection with the sale or use
of our products. Furthermore, this warranty is void if any product is changed or altered in any way or if the product is used in a manner
other than for which it is intended. This warranty only covers defects in material and workmanship; it does not cover conditions resulting
from normal wear and tear, neglect, abuse or accident.
* Guardian assumes no liability as to the information contained in this booklet. You are responsible to check the policies of your company and refer to state and federal
regulations pertaining to the proper use of fall protection equipment.
customer service
Please contact Guardian Fall Protection at 1-800-466-6385
with any questions or for any additional information.
62003
Prior to use, read and understand all manufacturer’s instructions
Meets
OSHA
Standards
Provided with equiPment. KeeP instructions for future reference.
IN-CAISCGD-NA-01
Picture may differ from actual product
operational safety
assembly instructions
read before beginning assembly.
failure to understand and folloW all safety rules and assembly instructions could result
in serious inJury or deatH.
metal conducts electricity:
Do not use this equipment where contact may be made with power lines or other live electrical circuits.
do not overload:
This scaffolding is designed to support a maximum load of 700 lb (318 kg)
operation and safety
Do not use this equipment if you are in poor health, taking medications, drugs, or have been consuming alcohol,
all of which may impair your ability to work safely on this product.
Always use this scaffold in conformity with local or national legislation which applies.
Inspect before use. Do not use scaffold if damaged or parts are missing.
Examine thoroughly to make sure unit is properly set up.
Always use casters locked to the side frames with the locking pins.
Securely lock all braces and deck before each use.
The deck must be fully seated within the braces and locked with the security latches before each use.
Braces must be inspected to ensure locking mechanisms are working correctly. Any brace with damaged locking
devices should not be used.
Never stack more than two units.
There must be a minimum of two side braces installed on each scaffold level and evenly spaced throughout the scaffold.
Lack of adequate bracing could cause scaffold to collapse.
Always use outriggers and guardrails when stacking units.
Guardrails must be installed on all open sides of a work deck where a person could fall from a height
of 6 ft (1.8 m) or more.
Do not climb unless all casters are in locked position.
Always remove casters when using this scaffolding on stairs.
Erect to be plumb on firm and level surface.
This scaffold must be used on a firm surface that is free of pits, debris, holes or obstructions.
Never place anything under or attach anything to this scaffold to increase height or to adjust to uneven surfaces.
Acids are corrosive and can seriously affect strength. Do not expose this scaffold to corrosive substances.
Keep scaffold free of debris and unnecessary equipment.
Keep your body close to the scaffold as you climb.
Do not overreach. Always keep body centered inside structure of scaffold.
Remove or fasten all tools, material or equipment before moving. Use extra caution when moving to avoid tipping.
Never try moving this scaffold while standing on it.
Never move a scaffold with a worker within.
Do not use powered devices to propel this scaffold. Use extra caution near operating machinery.
Do not use if the surface is not firm and level.
Do not use in inclement weather or high winds.
Maintain a firm grip while climbing.
Do not modify the scaffold or any of its components.
Do not use the scaffold as a footbridge.
All photos and drawings in this booklet are for reference purposes only. Refer to applicable OSHA codes and regulations for the proper use of this equipment.
1
Insert casters in side frame’s lower extremity. Lock casters with locking pins.
2
Lock the casters by firmly depressing the top tab of the caster.
3
While maintaining the brace locking mechanism pulled, insert the braces onto the frame sides at desired height.
4
Ensure that the locking stems are properly engaged in side frames.
5
Secure each brace using the 2 locking-pins.
6
Install the platform on the braces.
7
Turn the platform security latches toward the inside.
6
3
4
5
7
box contents
QTY. DESCRIPTION
2
1
2
2
1
4
8
Side frames
Braces
Anti-slip platform
Casters
Locking-pins