Qualcraft ULTRA-Jack User Manual
ULTRA JACK
MODEL # 2000
The reinforced structural grade aluminum/ rubber pole
has eld replaceable facing. Continuous metal reinforcing
virtually eliminates rubber distortion.
Product Specications
Model # 2000
Description: Ultra Jack
Unit Pack: 1 / Carton
Weight per Pack: 32 Pounds
Cu. Ft. per Pack: 2.9 cu. ft.
Wall braces with a swivel head
are included to accommodate
all roof pitches.
The System can be tted
with guardrails and a
workbench that can be
raised or lowered to the
perfect height, eliminating
overreaching and uncomfortable positions.
The pump jack mechanism uses
a spring-loaded cam lock for
smooth operation, and there’s
no clutch to wear out. For extra
comfort, the foot levers and
hand cranks are padded, and
the toe straps are big enough to
accommodate large work boots.
These unique
self-locking bases
and anchors are
interchangeable, and
provide added stability
and security for use
on all ground work
ULTRA-JACK
SYSTEM
Ultra Jack System
Model # 2000
Qual-Craft Industries offers a new line
of pump jack scaffolding called the UltraJack System. This amazing, new, state-of
-the-art system is easier to operate than the
older styles. Much of the effort in operating
a pump jack system can be used up in the
mechanism if it doesn’t operate smoothly.
Frustration and unnecessary use of energy
are not conducive to a productive and safe
work environment. You won’t believe the
smooth action and easy operation of the
Ultra-Jack System.
The time saved in setting-up and takingdown, the ease of operation, and the convenience of transporting a system designed
to be easy to transport, means more time
spent doing the job. The Ultra-Jack System
also includes new aluminum poles with metal
reinfedced rubber facing, which offer more
rigidity and superior strength over wood
poles. The Ultra-Jack poles are easily joined
together in two 24-foot sections allowing up
to 48 feet in height. The poles can be tted
with two types of bases to accommodate
any ground work surface. The non-skid base
works well for at and hard surfaces, and the
spiked anchors offer security on soft or uneven surfaces. The poles are equipped with
a eld replaceable rubber facing that ensures
“grab” as the jacks move up and down.
The whole System is easily handled and
pick-up friendly, making it a breeze to transport, once again saving time and labor costs.
An important part of this next generation
scaffolding is the aluminum planks. Their
extra strength allows for a greater span between poles, providing access to more area.
The Ultra-Jack System can be outtted with
a versatile workbench, which can be installed
as needed at any time during the job, without
Customer Support and Ordering Information
781-344-1000 • www.qualcraft.com
ULTRAJACK
SYSTEM
ULTRAJACK WORK BENCH
Usage Ideas
& Options
The Ultrajack system is a
completely integrated system
designed to maximize your
productivity and safety.
The system is congurable
with a variety of options
that accomodate mulitple
congurations and nearly any
project environment.
ULTRA-JACK
MODEL # 2000
removing the Ultra-Jack from the pole, or
requiring any disassembly. The workbench
fastens right onto the poles, and can be
a real time saver by providing a spacious
work area to ensure that you take the right
tools and supplies up the scaffolding with
you, promoting productivity and efciency.
The workbench also insures safety by providing a secure place to carry tools and
materials and prevent them from becoming
a fall hazard to workers below. Another
component of the Ultra-Jack System are
the wall braces that feature a full swivel
head to cover all possible roof pitches.
These provide rigid, triangular bracing as
required by OSHA. The positive spring
loaded cam lock on the Ultra-Jack pump
mechanism provides durability, smooth
operation, and means that there is no
clutch to wear out. The Ultra-Jack pump
mechanism has a greater climbing rate per
stroke than other available pump jacks,
which allows for faster raising of the work
platform, and since it requires less strokes
and effort, results in less operator fatigue.
The foot levers that activate the lowering
mechanism, and hand crank handles that
operate the lowering gear, are padded for
extra comfort. The boot straps on the foot
levers are big enough to accommodate
large work boots.
Poles are available in 6,12, and 24 ft.
lenghts. Join any two pole lenghts together
using a pole connector, allowing a scaffold
system to reach a working height of 18 ft.,
24 ft., 30 or 48 ft. The use of aluminiun
walk planks with guardrails allows for wider
spans between poles.
POLE ANCHOR
ULTRA-JACK BRACE model #2002
ULTRA-JACK WORK BENCH model #2004
ULTRA-JACK POLE ANCHOR model #2008
ULTRA-JACK POLE BASE model #2009
POLE BASE
ULTRA-JACK BRACE
Customer Support and Ordering Information
781-344-1000 • www.qualcraft.com
Loading...