Qualcraft Skyhook Flashing Kit User Manual

APPLICATIONS:

• Works with Skyhook Anchors 00310-00340

• 26ga. metal flashing is designed specially for Skyhook

• Wood or metal substrate construction

FEATURES:

Primer finish allows each painting to match roof finish
Lightweight but durable
Neoprene large and small gaskets (sold separately) help provide weather/moisture vapor and help
facilitate caulking around tab.

PROPER USE:

Paint the metal flashing before installation.

Skyhook flashing is installed by placing 4 screws, one in each corner of horizontal flange of the
flashing, through the flashing and roofing material directly to the roof decking.

If the optional Gasket Large (00359) is used, install it under the Skyhook before the anchor is
installed.

If the optional Gasket Small (00358) is used, install it over the installed anchor, around the
Skyhook upright, between the metal flashing and the Skyhook unit.

Apply caulking around the upright after the metal flashing is screwed into the decking to create a
watertight seal.

26513 79th Ave. S.

Kent, WA

800-466-6385

www.guardianfall.com