Qualcraft Ladder Hook User Manual

LADDER HOOK W/WHEEL

MODEL # 2480, #2481

LADDER

ACCESSORIES

Ladder Hook
with Wheel

Model #2481

Ladder Hook
without Wheel

Model # 2480

Fits single or ex ten sion ladders
in wood,  berglass, and
aluminum in round and “D”
rung styles. Constructed of
steel for strength, du ra bil i ty,
and safety, and adjusts to  t
be tween top two ladder rungs.

Product Speci cations

Model # 2480 2481

Description: Ladder Hook Ladder Hook w/ Roller

Unit Pack: 1 1

Weight per Pack: 11 Pounds 14 Pounds

Cu. Ft. per Pack: .13 cu. ft. .15 cu. ft.

LADDER
SCAFFOLDING

LADDER HOOK W/WHEEL

MODEL # 2480, #2481

Model # 2480 Ladder Hook
Model # 2481 Ladder Hook with
Wheels

1) Install two #2480 or two #2481
Ladder Hooks as pictured onto the
top two rungs of the ladder. Secure
in place by clamping the bottom of
the ladder hook around the lower of
the two ladder rungs. Then secure
roof hook to the upper ladder rung
with the rung clip by tightening the
wing nut and bolt. Check to insure
that each hook is resting up against a
corresponding side-rail of the ladder.

2) With the hook facing up, slide the
ladder up past the peak of the roof.
Turn the ladder over so that the two
hooks rest on the opposite side of
the roof peak. The ladder should be
 at on the roof with the angle clip at
right angle to the hook and resting
securely against the roof’s surface.
Always install two ladder hooks per
ladder.

This product is not recommended for
use on roofs with vented ridges.

Customer Support and Ordering In for ma tion

781-344-1000 • www.qualcraft.com