Qualcomm Atheros QCMD335 User Manual

Qualcomm Atheros, Inc.

1700 Technology Drive

San Jose, CA 95110-1383

U.S.A.

MD335 Modular Certification

OEM Integrator Instructions

MKG-17218 Ver. 1.2

June 21, 2013

Confidential and Proprietary - Qualcomm Atheros, Inc.

Not to be used, copied, reproduced in whole or in part, nor its contents revealed in any manner to others without the
express written permission of Qualcomm Atheros, Inc.

QUALCOMM is registered trademark of Qualcomm Incorporated. ATHEROS is a registered trademark of
Qualcomm Atheros, Inc. Any other registered and unregistered trademarks are the property of Qualcomm
Incorporated, Qualcomm Atheros, Inc. or their respective owners and used with permission. Registered marks
owned by Qualcomm Incorporated and Qualcomm Atheros, Inc. are registered in the United States of America and
may be registered in other countries.

This technical data may be subject to U.S. and international export, re-export, or transfer (“export”) laws. Diversion
contrary to U.S. and international law is strictly prohibited.

Copyright © 2011 Qualcomm Atheros, Inc.

All rights reserved.

Revision

Date

Description

Ver. 1.1

May 2013

Initial release

Ver 1.2

June 2013

Revise content to Section 8

Revision history

NOTE: The Qualcomm Atheros (QCA) reference design radio module (the “Module”) is designed for use

only in specific countries in which QCA has obtained certificates of compliance with local laws
and regulations. Therefore, the Module may not be sold, operated or incorporated into products
for use in countries for which it has not been certified. See Section 3 herein. In addition, any
deviation from the settings, methods, conditions and restrictions for integration of the Module
into a host system, as detailed in this document, could be a violation of applicable national law
and may be punishable as such, and in such event, the products into which the Module is
incorporated may not be lawfully distributed or sold in such countries. QCA assumes no
responsibility for any liability or loss related to installation, integration or operation of the
Module.

MKG-17218 Ver. 1.2 2 Confidential and Proprietary - Qualcomm Atheros, Inc.
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION

MD335 Modular Certification OEM Integrator Instructions

Contents

1 Introduction ...................................................................................................... 4

2 Applicable Module ........................................................................................... 4

3 Available Global Modular Approvals from Qualcomm Atheros .................. 5

4 Additional Regulatory Conformance Testing and/or Submissions

Required by the Integrator ........................................................................... 5

5 Compliant/Allowable Tx Power Settings Programmed into EEPROM ........ 7

6 Allowable Antennas to Use with the Radio Module ...................................... 7

7 Antenna Placement inside the Host System and RF Safety ........................ 8

8 Simultaneous Transmission with Other Integrated or Plug-In Radios ....... 9

9 Module May Not Be Installed by End Users .................................................. 9

10 Required Labeling on the Outside of the Host .......................................... 10

10.1 FCC ........................................................................................................................... 10

10.2 Taiwan NCC ............................................................................................................. 10

10.3 European Community R&TTE ................................................................................. 11

11 Required Labeling on the Module .............................................................. 12

11.1 FCC labeling on the Module ..................................................................................... 12

11.2 Rest of world labeling on the Module ....................................................................... 12

11.3 Instructions to download the sample global label artwork with certification IDs .... 12

12 Required Regulatory Wording for User Manual/Installation Manual ....... 13

12.1 FCC compliance information .................................................................................... 13

12.2 Industry Canada notice ............................................................................................. 14

12.3 European Community (R&TTE) user manual wording and declaration .................. 16

12.4 European Community (R&TTE) Declaration of Conformity for System................. 17

12.5 Taiwan user manual wording .................................................................................... 18

12.6 Korea user manual wording ...................................................................................... 18

12.7 Japan user manual wording ....................................................................................... 18

13 OEM Integrator Checklist ............................................................................ 19

MKG-17218 Ver. 1.2 3 Confidential and Proprietary - Qualcomm Atheros, Inc.
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION

MD335 Modular Certification OEM Integrator Instructions

1 Introduction

This document describes the steps that the OEM integrator must follow when designing and
manufacturing a system utilizing a Qualcomm Atheros (QCA) reference design radio module (the
“Module”).

Failure to follow the instructions in this document may invalidate the FCC certification and
authorization of the Module for use in the U.S. and in other countries.

The Qualcomm Atheros modular certifications described in this document apply only to radio
conformance for the Module. The OEM integrator is responsible for all system-level EMI/EMC
and Product Safety testing and certification that apply to the host system in the U.S. and other
countries where the system will be marketed or sold.

This document must be read in conjunction with the document “MD335 MOB Module
Certified Antennas and Layout ” which document describes the allowable
antenna options, layout and antenna matching components which must be used with the
Qualcomm Atheros MD335 MoB module in order to use the Qualcomm Atheros Modular
Certifications available for this MoB and explains the conditions/limitations and actions
by end integrators. Failure to follow the requirements in this document will invalidate
the FCC and other country modular Certifications. To obtain “MD335 MOB Module
Certified Antennas and Layout” design guidance. Please contact your Qualcomm Atheros account
Representative to request the document depends the business award.

2 Applicable Module

 Part Number: MD335
 FCCID: PPD-QCMD335 IC ID: 4104A-QCMD335

MKG-17218 Ver. 1.2 4 Confidential and Proprietary - Qualcomm Atheros, Inc.
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION

MD335 Modular Certification OEM Integrator Instructions

Malaysia

Each importer/distributor needs to file for import permission

Singapore

Recommend use of importer’s own local radio dealer number

Israel

Additional approval certificate required for importer

3 Available Global Modular Approvals from Qualcomm

Atheros

Module certification is limited to those countries for which Qualcomm Atheros has obtained
radio modular approvals. Integrators can access the current list of certified countries in one of
two ways:

1. Log on to the Qualcomm Atheros secure customer support site. Follow the links to regulatory

certifications.

Search for the folder MD335 on the support site.
Or, if you do not have access to the customer support site, then:

2. Contact your Qualcomm Atheros account representative to request access to the country list

and modular certificates.

OEM integrators must receive their own radio certification for any country in which the system
will be sold if a modular certification for that country is not available from Qualcomm Atheros.

4 Additional Regulatory Conformance Testing and/or

Submissions Required by the Integrator

 The global modular certifications apply to radio conformance for the Module only.

The OEM integrator is responsible for additional system-level EMI/EMC and Product Safety

testing and certification that applies in the U.S. and other countries to the host system

containing the Module. This includes, but is not limited to, Federal Communications

Commission (“FCC”) Part 15 Class B Digital Emissions, China CCC, Taiwan BSMI, Korea

KC, ETSI EN 301 489-17 and others.

These system-level EMC tests are to be done with the Module installed and included in the

scope of the submission.

 Some of the countries for which modular certifications are provided require additional

submissions, authorizations or import permission by the system-vendor or importer. The

integrator is responsible for these additional actions.

By way of example, the OEM integrator must take additional action for radio certification in

these countries:

 Modular radio certification is not possible in some countries. For such countries, OEM

integrators must ensure radio certification for the end system is obtained, before placing the

product on the market. A current list of applicable countries can be provided by Qualcomm

Atheros.

MKG-17218 Ver. 1.2 5 Confidential and Proprietary - Qualcomm Atheros, Inc.
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION

MD335 Modular Certification OEM Integrator Instructions

Please contact your Qualcomm Atheros account representative if you have questions about

the additional regulatory conformance testing and/or related submissions.

MKG-17218 Ver. 1.2 6 Confidential and Proprietary - Qualcomm Atheros, Inc.
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION

MD335 Modular Certification OEM Integrator Instructions

CTL File Name: ctl_md335_notxbf.art

PIFA 2.4 GHz

3.6

5 Compliant/Allowable Tx Power Settings Programmed into

EEPROM

This file contains the allowable transmit power settings that are to be programmed into the
Module during original manufacturing:

NOTE: Programming in higher values than provided for in this file will invalidate all radio certifications

for this module.
OEM integrators can access the file one of two ways:

 Log on to the Qualcomm Atheros secure customer support site, then:

a. Download the Atheros Radio Test (ART) package

b. Browse to this folder in the zip package: command\MD335

c. Find CTL File (file name reference above)
OR, if you do not have access to the customer support site, then:

 Contact your Qualcomm Atheros account representative to request the CTL file.

6 Allowable Antennas to Use with the Radio Module

The module is certified for use only with certain antennas as described in this section.

NOTE: Allowed Antenna Type:

1. PIFA with omnidirectional pattern formed from stamped metal or film.

Table 1 Allowed Maximum Gain (dBi), Including Antenna Cable Loss

WARNING: Use of other antenna types or the same type of antenna but with higher gain than listed above is

not allowed without additional testing and appropriate FCC approval.
Contact your Qualcomm Atheros account representative for additional guidance if you decide to

use different antenna types or higher gain antennas in the end system.
Some examples of antenna types not considered the same type as PIFA are dipole/monopole,

PCB trace, patch, and chip antennas.
In addition, regulatory agencies in Japan, Korea, and Taiwan require submission of antenna

specification sheets for all antenna models used with the QCA module. This notification process
must be followed by the integrator before original product launch and whenever new host systems
(with new antenna models) are launched.

Notification of All Antenna Models to be used with the Module:

For training on the notification process contact:
Stanley Lin, Regulatory Program Manager [mailto:[e-mail]]

For submitting antenna specifications: mailto:[e-mail].

MKG-17218 Ver. 1.2 7 Confidential and Proprietary - Qualcomm Atheros, Inc.
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION

MD335 Modular Certification OEM Integrator Instructions

7 Antenna Placement inside the Host System and RF Safety

The FCC and other countries’ regulatory bodies impose strict conditions and limitations on the
RF exposure levels of end products. Acceptable RF exposure levels for this Module depend on
transmit power, the location of the transmitting antenna(s) inside the host system and the
expected separation of the transmitting antennas to the end user. OEM integrators must take great
care to ensure each host system complies with the applicable RF exposure requirements.

NOTE: The antenna-to-user separation distance must be greater than 0.9 cm.

WARNING: Failure to adhere to these separation/spacing rules will invalidate the FCC certification for the

Module.

 This separation is measured between the closest point of each transmitting antenna inside the

host device to the point of contact by the user or nearby person outside of the host device.

 For notebooks/netbooks/laptops, the LCD is opened 90 degrees/perpendicular to the

keyboard. The separation distance is then measured from the nearest point of each

transmitting antenna to the bottom of the host.

 For notebooks/netbooks/laptops, the transmitting antenna cables shall be positioned away

from antenna elements to conform to the configuration tested for compliance.

 When transmitting antennas are installed in the display section of notebook/netbook/laptops,

the display section shall not have metallic components and material that can influence or

change the operating and RF exposure characteristics of the antennas.

 The separation between the main and aux antennas must be at least 3 cm. (applied when

module support MIMO)

 The transmitter module may not be co-located with any other transmitter or antenna.

Where one or more of the conditions above cannot be met for a particular host system, additional
testing will be required to secure the necessary certifications for the system.

You may contact your Qualcomm Atheros account representative with any questions regarding
compliance of the host system(s) with these restrictions.

NOTE: These restrictions do not apply to a receive-only antennas.

MKG-17218 Ver. 1.2 8 Confidential and Proprietary - Qualcomm Atheros, Inc.
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION

MD335 Modular Certification OEM Integrator Instructions

8 Simultaneous Transmission with Other Integrated or Plug-

In Radios

The FCC imposes conditions and limitations when additional radio(s) are co-located in the same
host system as the Qualcomm Atheros Module with capability to transmit simultaneously. The
detailed rules from the FCC are described in various Knowledge Database publications that may
be found using the instructions below. Co-locating other radios such as an integrated or plug in
Wireless WAN/cellular radio with the Qualcomm Atheros Wireless LAN module requires
additional evaluation and possibly submission for authorization from the FCC.

Because the rules are highly dependent on the characteristics of the particular radios that are co­located and simultaneously transmitting, the OEM integrator should seek guidance from a
knowledgeable test lab or consultant to determine if additional testing and FCC certification is
required. In this case, failure to evaluate and follow the required FCC procedures will invalidate
the FCC certification of the Module and end system.

To download the FCC rules for collocated radios:

1. https://apps.fcc.gov/oetcf/kdb/index.cfm

2. Enter 616217 in the ‘publication number’ search box

3. Download latest applicable version of KDB 616217 document.
For expert advice regarding collocation rules, we recommend you contact an FCC-approved

Telecommunication Certification Body (“TCB”)::

1. https://apps.fcc.gov/oetcf/kdb/index.cfm.

2. Choose your country and or state from the pull-down list.

3. Scroll through the search results and choose a TCB contact from which to seek advice.

You may also contact your Qualcomm Atheros account representative with any questions
regarding compliance of the host system(s) with the above restrictions.

9 Module May Not Be Installed by End Users

FCC rules require this Module to be installed in host systems at the factory by the OEM
integrator. Thus, end users of the system may not install the Module. Therefore, the host product
user instructions must not advise the end user on how to access or remove the Module. Additional
FCC authorization/filing is needed to allow end user installation of radio modules.

MKG-17218 Ver. 1.2 9 Confidential and Proprietary - Qualcomm Atheros, Inc.
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION

MD335 Modular Certification OEM Integrator Instructions

Contains:
FCC ID: PPD-QCMD335
IC: 4104A-QCMD335

本產品內含射頻模組: xxxxxxxxxxxxxx

10 Required Labeling on the Outside of the Host

NOTE: Explanatory text in red font must not be included in the final label.

10.1 FCC

 The FCC requires a label on the outside of the host system visible to the end user.

Example wording is:

(Replace X’s with actual IDs found in section 2).

 The FCC requires a logo signifying emissions compliance on the outside of the host system.

Additional options are available for placement of the FCC label on the host. Please refer to the
FCC Knowledge Database KDB784748 found at https://apps.fcc.gov/oetcf/kdb/index.cfm.

NOTE: The Integrator is responsible to perform FCC Part 15 Class B digital emissions testing on the end

system with the radio Module installed. The FCC logo below should not be affixed unless the
OEM integrator has obtained the necessary Part 15 approval, e.g., self-declaration of conformity.

If the host system is approved to FCC Class B digital emissions limits under a grant of
certification issued by a TCB, the FCC ID number shown on the grant should be used on the label
instead of the FCC logo below.

10.2 Taiwan NCC

Taiwan NCC requires a label on the outside of the host system visible to the end user.
The required wording is:

(Replace X’s with actual IDs found in section 2 ).

MKG-17218 Ver. 1.2 10 Confidential and Proprietary - Qualcomm Atheros, Inc.
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION

MD335 Modular Certification OEM Integrator Instructions

Important Notice: This product is a

Radio LAN device operating in 2.4

& 5 GHz bands (or 2.4GHz band)

for Home and Office use in the

E.E.A. .

AT

BE

CH

CY

CZ

DE

DK

ES

FI

FR

GB

GR

EE

HU

IT

IE

IS

LI LT

LU

LV

MT

NL

NO

PL

PT

SE

SI

SK

10.3 European Community R&TTE

 The European Community R&TTE Directive requires the CE Marking shown below on the

outside of the host AND on the outside of the shipping container/packaging:

For 2.4GHz

For 5 GHz or 2.4GHz = 5GHz dual bands

 The European Community R&TTE Directive also requires the following note to consumers

on the outside of the shipping container/packaging:

NOTE: The Integrator is expected to translate the text in this Section into the appropriate local languages

for the European countries in which the product will be marketed or sold.

MKG-17218 Ver. 1.2 11 Confidential and Proprietary - Qualcomm Atheros, Inc.
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION

MD335 Modular Certification OEM Integrator Instructions

11 Required Labeling on the Module

11.1 FCC labeling on the Module

The Integrator must ensure that the FCC ID (as indicated in section 2) is affixed on the Module
along with other country certification numbers and logos as described herein.

NOTE: The Module ODM may affix regulatory labeling at time of Module manufacturing. However, the

PCOEM must ensure the Module label is complete, correct and applicable for all countries to
which the host system is to be imported, marketed, or sold.

11.2 Rest of world labeling on the Module

The Integrator must ensure the Module includes a global regulatory label with certification
numbers and logos for all target countries. The system integrator is responsible to confirm the
final regulatory label on the radio Module contains all required certification IDs for all countries
in which the system will be marketed or sold.

It is recommended that the PCOEM implement a review and sign-off process as well as change
control process with each Module ODM to ensure that the module label meets the PCOEM’s
requirements.

Qualcomm Atheros provides sample artwork with the applicable certification numbers for this
Module. The provided .PDF document can be opened using Adobe Illustrator so the sample
artwork can be copied and modified as needed. Therefore the final label produced by the Module
manufacturer will vary from this sample. However, the logos and certification numbers must be
those shown in the sample global label.

Contact your Qualcomm Atheros account representative with any questions regarding module
labeling.

11.3 Instructions to download the sample global label artwork with
certification IDs

1. Log on to the Qualcomm Atheros secure customer support site. Follow the links to

regulatory certifications.

NOTE: Search for the folder MD335 in the support site.

2. Find the folder: Sample Labeling for Module.

3. Download the PDF file found in the folder.
OR, if you don’t have access to the customer support site, then:

Contact your Qualcomm Atheros account representative to request the Sample Label file.

MKG-17218 Ver. 1.2 12 Confidential and Proprietary - Qualcomm Atheros, Inc.
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION

MD335 Modular Certification OEM Integrator Instructions

12 Required Regulatory Wording for User Manual/Installation

Manual

The integrator must include text in the user manual meeting the regulators’ requirements. The
text below or similar wording should be used.

NOTE: Text in red font must be replaced.

12.1 FCC compliance information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.

This product does not contain any user serviceable components. Any unauthorized
product changes or modifications will invalidate warranty and all applicable regulatory
certifications and approvals, including authority to operate this device.

FCC Part 15 Digital Emissions Compliance
We [System Manufacturer Name, Address, Telephone], declare under our sole

responsibility that the product [System Name] complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.

WARNING: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation.
This equipment generates and radiates radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications.

However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:

 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from the one the receiver

is connected to.

 Consult the dealer or an experienced radio/TV technician for help.

The user may find the following booklet prepared by the Federal Communications
Commission helpful:

The Interference Handbook
This booklet is available from the U.S. Government Printing Office, Washington, D.C.

20402. Stock No.004-000-00345-4.

MKG-17218 Ver. 1.2 13 Confidential and Proprietary - Qualcomm Atheros, Inc.
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION

MD335 Modular Certification OEM Integrator Instructions

(Notice for 5GHz)

Operations in the 5.15-5.25GHz band are restricted to indoor usage only. (For 5GHz only)

(RF exposure statement)

Radiation Exposure Statement:
The product comply with the FCC portable RF exposure limit set forth for an uncontrolled

environment and are safe for intended operation as described in this manual. The further
RF exposure reduction can be achieved if the product can be kept as far as possible from
the user body or set the device to lower output power if such function is available.

12.2 Industry Canada notice

This device complies with Canadian RSS-210.

This device complies with Industry Canada license-exempt RSS standard(s). Operation
is subject to the following two conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause
undesired operation of the device.

Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux

appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions
suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce
dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de

provoquer un fonctionnement indésirable.
(Notice for 5GHz)
Caution :

(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce
the potential for harmful interference to co-channel mobile satellite systems;

(ii) the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and
5470-5725 MHz shall comply with the e.i.r.p. limit; and

(iii) the maximum antenna gain permitted for devices in the band 5725-5825 MHz shall
comply with the e.i.r.p. limits specified for point-to-point and non point-to-point operation
as appropriate.

(iv) Users should also be advised that high-power radars are allocated as primary users
(i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these
radars could cause interference and/or damage to LE-LAN devices.

Avertissement:

MKG-17218 Ver. 1.2 14 Confidential and Proprietary - Qualcomm Atheros, Inc.
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION

MD335 Modular Certification OEM Integrator Instructions

Le guide d’utilisation des dispositifs pour réseaux locaux doit inclure des instructions

précises sur les restrictions susmentionnées, notamment :
(i) les dispositifs fonctionnant dans la bande 5 150-5 250 MHz sont réservés uniquement

pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux

systèmes de satellites mobiles utilisant les mêmes canaux;
(ii) le gain maximal d’antenne permis pour les dispositifs utilisant les bandes 5 250-5 350

MHz et 5 470-5 725 MHz doit se conformer à la limite de p.i.r.e.;

(iii) le gain maximal d’antenne permis (pour les dispositifs utilisant la bande 5 725-5 825
MHz) doit se conformer à la limite de p.i.r.e. spécifiée pour l’exploitation point à point et

non point à point, selon le cas.
(iv) De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de

haute puissance sont désignés utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour
les bandes 5 250-5 350 MHz et 5 650-5 850 MHz et que ces radars pourraient causer du
brouillage et/ou des dommages aux dispositifs LAN-EL.

(RF exposure statement)

Radiation Exposure Statement:
The product comply with the Canada portable RF exposure limit set forth for an

uncontrolled environment and are safe for intended operation as described in this manual.
The further RF exposure reduction can be achieved if the product can be kept as far as
possible from the user body or set the device to lower output power if such function is
available.

MKG-17218 Ver. 1.2 15 Confidential and Proprietary - Qualcomm Atheros, Inc.
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION

MD335 Modular Certification OEM Integrator Instructions

Česky [Czech]

[COMPANY NAME] tímto prohlašuje, že tento Radiolan je ve shodě se základními

požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES.

Dansk [Danish]

Undertegnede [COMPANY NAME] erklæ rer herved, at følgende udstyr Radiolan
overholder de væ sentlige krav og øvrige relevante krav i direktiv 1999/5/EF.

Deutsch [German]

Hiermit erklärt [COMPANY NAME] dass sich das Gerät Radiolan in Ü bereinstimmung
mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen
der Richtlinie 1999/5/EG befindet.

Eesti [Estonian]

Käesolevaga kinnitab [COMPANY NAME] seadme Radiolan vastavust direktiivi
1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele
sätetele.

English

Hereby, [COMPANY NAME], declares that this Radiolan is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC.

Español [Spanish]

Por medio de la presente [COMPANY NAME] declara que el Radiolan cumple con los
requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la
Directiva 1999/5/CE.

Ελληνική [Greek]

ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ [COMPANY NAME] ΔΗΛΩΝΕΙ ΟΤΙ Radiolan ΣΥΜΜΟΡΦΩΝΕΤΑΙ
ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ
ΟΔΗΓΙΑΣ 1999/5/ΕΚ.

Français [French]

Par la présente [COMPANY NAME] déclare que l'appareil Radiolan est conforme aux
exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE.

Íslenska [Icelandic]

Hér með lýsir [COMPANY NAME] yfir því að Radiolan er í samræ mi við grunnkröfur og
aðrar kröfur, sem gerðar eru í tilskipun 1999/5/EC.

Italiano [Italian]

Con la presente [COMPANY NAME] dichiara che questo Radiolan è conforme ai
requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.

Latviski [Latvian]

Ar šo [COMPANY NAME] deklarē, ka Radiolan atbilst Direktīvas 1999/5/EK būtiskajām
prasībām un citiem ar to saistītajiem noteikumiem.

Lietuvių

[Lithuanian]

Šiuo [COMPANY NAME] deklaruoja, kad šis Radiolan atitinka esminius reikalavimus ir
kitas 1999/5/EB Direktyvos nuostatas.

Malti [Maltese]

Hawnhekk, [COMPANY NAME], jiddikjara li dan Radiolan jikkonforma mal-ħtiġijiet
essenzjali u ma provvedimenti oħrajn relevanti li hemm fid-Dirrettiva 1999/5/EC.

Magyar

[Hungarian]

Alulírott, [COMPANY NAME] nyilatkozom, hogy a Radiolan megfelel a vonatkozó
alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.

Nederlands

[Dutch]

Hierbij verklaart [COMPANY NAME] dat het toestel Radiolan in overeenstemming is met
de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.

Norsk [Norwegian]

[COMPANY NAME] erklæ rer herved at utstyret Radiolan er i samsvar med de

grunnleggende krav og øvrige relevante krav i direktiv 1999/5/EF.

12.3 European Community (R&TTE) user manual wording and

declaration

NOTE: Text in red font must be replaced with name of company responsible for placing the system on

the European Community Market.

Europe – EU Declaration of Conformity or

Marking by the above symbol indicates compliance with the Essential Requirements of the
R&TTE Directive of the European Union (1999/5/EC). This equipment meets the following
conformance standards:

EN300 328, EN 301 893, EN 301 489-17, EN60950, EN 62311

MKG-17218 Ver. 1.2 16 Confidential and Proprietary - Qualcomm Atheros, Inc.
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION

MD335 Modular Certification OEM Integrator Instructions

Polski [Polish]

Niniejszym [COMPANY NAME] oświadcza, że Radiolan jest zgodny z zasadniczymi
wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC.

Português

[Portuguese]

[COMPANY NAME] declara que este Radiolan está conforme com os requisitos

essenciais e outras disposições da Directiva 1999/5/CE.

Slovensko

[Slovenian]

[COMPANY NAME] izjavlja, da je ta Radiolan v skladu z bistvenimi zahtevami in

ostalimi relevantnimi določili direktive 1999/5/ES.

Slovensky [Slovak]

[COMPANY NAME] týmto vyhlasuje, že Radiolan spĺňa základné požiadavky a všetky

príslušné ustanovenia Smernice 1999/5/ES.

Suomi [Finnish]

[COMPANY NAME] vakuuttaa täten että Radiolan tyyppinen laite on direktiivin

1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.

Svenska [Swedish]

Härmed intygar [COMPANY NAME] att denna Radiolan står I överensstämmelse med
de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av
direktiv 1999/5/EG.

12.4 European Community (R&TTE) Declaration of Conformity for

System

In addition to including the radio conformity wording described in the previous section in the user
manual, the end integrator must also create and sign a European Declaration of Conformity
(DoC) for all European Directives applicable to the end product. At a minimum, this will be a
DoC per the R&TTE Directive covering Radio, EMC, product Safety and RF Exposure essential
requirements. The DoC must reference harmonized standards used for all radios present in the
system.

Full details of R&TTE DoC requirements can be found at:
http://www.ec.europa.eu/enterprise/sectors/rtte/index_en.htm

NOTE: An image of the DoC signed by the OEM integrator may be included in the user manual or a link

to the DoC on the integrator’s company web site should be provided in the user documentation.

MKG-17218 Ver. 1.2 17 Confidential and Proprietary - Qualcomm Atheros, Inc.
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION

MD335 Modular Certification OEM Integrator Instructions

Band

Frequencies (GHz)

DFS Feature

Indoor Usage

Outdoor Usage

W52

5.15-5.25

Not Required

Allowed

Not Allowed

W53

5.25-5.35

Required

Allowed

Not Allowed

W56

5.470-5.725

Required

Allowed

Allowed

12.5 Taiwan user manual wording

台灣: 國家通訊傳播委員會

低功率電波輻射性電機管理辦法
第十二條經型式認證合格之低功率射頻電機，非經許可，公司、商號或使
用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。

第十四條低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發
現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信
法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射
性電機設備之干擾。

在 5.25-5.35 秭赫(GHz)頻帶內操作之無線資訊傳輸設備，限於室內使用。(For 5GHz only)

12.6 Korea user manual wording

Korea KCC

해당 무선설비는 전파혼신 가능성이 있으므로 인명안전과 관련된 서비스는 할 수 없음

12.7 Japan user manual wording

The Japan regulatory authority does not provide specific guidance to manufacturers
regarding user manual wording. However, system integrators must ensure end products
are compliant with the technical requirements for 5GHz operation – specifically the
outdoor usage restriction and passive scanning requirement as shown:

MKG-17218 Ver. 1.2 18 Confidential and Proprietary - Qualcomm Atheros, Inc.
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION

MD335 Modular Certification OEM Integrator Instructions

Company Name

___________________________

Signature

___________________________

Company Address

___________________________

Name

___________________________

___________________________

Title

___________________________

Email

___________________________

Phone

___________________________

Date

___________________________

13 OEM Integrator Checklist

The party below will implement the Qualcomm Atheros Module in host systems in accordance
with the instructions specified in this document and the documents referenced herein.

 The OEM integrator will ensure the Module is integrated in a host systems using only the
approved antenna model(s) described in this document.

 The OEM integrator will ensure the antenna placement inside the host system will maintain
the required spacing to end user for RF Exposure compliance, as specified in this document.

 If other radios are integrated inside the host with the Qualcomm Atheros Module, the OEM
integrator will contact its test lab, TCB or Qualcomm Atheros to determine if additional FCC
compliance evaluation is required to meet FCC collocation rules.

 The OEM integrator will ensure end user documentation will contain the specified regulatory
wording and ensure the host system and the Module itself are labeled as specified in this
document.

 The OEM integrator will ensure the Module is programmed in the factory with compliant
transmit power not exceeding the levels specified in this document.

Qualcomm Atheros requests that the OEM integrator acknowledge its receipt of this
document and the above instructions. You may contact Qualcomm Atheros with any
questions concerning this document or the responsibilities of the OEM integrator.

NOTE: Please email a signed and completed copy of this acknowledgment to

[e-mail].

MKG-17218 Ver. 1.2 19 Confidential and Proprietary - Qualcomm Atheros, Inc.
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION