Page 1
100pcs Adhesive lined Heat shrink tube-assortment, shrink ratio 3:1
Shrinking ratio
3 : 1
Material PE
Shrinking temperature 70°C - 125°C
Operation temperature -40°C - 125°C
Flammability VW-1
Tensile strength
≧ 10.4Mpa
Elongation at break
≧ 300%
Rated voltage 600V
Diselectric strength
≧ 1.5kv/mm at 30sec.
Volume resistivity
≧ 1014Ω
Inner diameter ø after shrink ø
1 7.9 mm 2.7 mm 65 mm 5
2 12.7 mm 4.2 mm 95 mm 3
3 9.5 mm 3.2 mm 95 mm 4
4 6.4 mm 2.2 mm 65 mm 8
5 1.6 mm 0.5 mm 32 mm 25
6 2.4 mm 0.8 mm 32 mm 20
7 3.2 mm 1.0 mm 32 mm 20
8 4.8 mm 1.6 mm 65 mm 15
Length
pcs
Section
Heat shrink tube
Item No.
This range is particularly suitable for hobbyists,
craftsmen, field service, service workshops,
electronics and the laboratory needs.
100 pieces of shrinking ration 3:1 standard
shrinking tube for a range of application
diameter from 1.6 to 12.7 mm.
Hot-melt adhesive lined tubing in the Black color.
The heat-shrink tubing can be used for
insulation, protective covering of components,
as anti-kink protection, protection against corrosion,
as well as repair of cables and lines, and much more be used.
: 201711CA003
se t co nt en ts
1
2
3
4
5
6
7
8
Loading...