Page 1
Heat shrinking Tube Service Kit
Item No : 2004CA098.
This range is particularly suitable for hobbyists,
craftsmen, field service, service workshops,
electronics and the laboratory needs.
Shrinking ration 2:1 standard for a range of application
diameter from 2.0 to 16.5 mm.
The heat-shrink tubing can be used for
insulation, protective covering of components,
as anti-kink protection, protection against corrosion,
as well as repair of cables and lines, and much more be used.
set con tents
Heat shrink tube
Length
Inner diameter ø after shrink ø
2.0 mm 0.85 mm 3 m
3.0 mm
4.0 mm 3 m
1 30 mm.
1 80 mm.
3 m
Shrinking ratio 2 : 1
Material PE
Shrinking temperature 70°C - 110°C
Operation temperature -55°C - 110°C
Flammability VW-1
Tensile strength ≧ 10.3 Mpa
Elongation at break ≧ 300%
Rated voltage 600V
Diselectric strength ≧ 1.5kv/mm at 30sec.
Volume resistivity
≧ 1014Ω
6.5 mm 2 m
8.5 mm 2 m
12.5 mm 1.5 m
16.5 mm
3 00 mm.
4 00 mm.
6 00 mm.
8 00 mm.
1 m
Loading...