Quadrant tech C-1.2D User Manual

&LQH0DVWHU

DVD Playback Card

C-1.2D

User ’s Guide

Table of Contents

Preface.......................................................................................................ii

Introduction ...............................................................................................1

CineMaster Overview .......................................................................................1

Features.......................................................................................................1

CineMaster C-1.2D Specifications................................................................2

Getting Started.......................................................................................... 3

General Installation Instructions....................................................................... 3

PCI Bus Compatibility Guidelines................................................................. 3

Video Port Compatibility Guidelines............................................................. 3

Hardware Installation.................................................................................... 5

Software Driver Installation.........................................................................11

DVD Player Software Installation ...............................................................15

Advanced Settings and Troubleshooting........................................................ 30

Determining Driver Versions ...................................................................... 30

Determining DVD Player Versions .............................................................31

General Troubleshooting: Questions, and Answers...................................33

Appendix A..............................................................................................37

Keyboard Shortcuts........................................................................................37

Appendix B..............................................................................................41

RIVA 128 Video Resolutions Supported ........................................................ 41

Appendix C.............................................................................................. 43

Glossary.........................................................................................................43

Appendix D.............................................................................................. 53

Technical Support ..........................................................................................53

User’s Guide CineMaster i

Preface

Trademark Notice and Warranty Disclaimer

CineMaster, DVD Player, and VideoInlay are trademarks of Quadrant
International, Inc. Copyright 1996, 1997 Quadrant International, Inc. All
Rights Reserved.

Windows, Video for Windows, and Windows Explorer are trademarks of
Microsoft, Inc. All other trademarks mentioned in this manual or accompanying
materials are for identification purposes only and are in no way intended to
infringe on the copyrighted properties of their respective owners.

QUADRANT INTERNATIONAL MAKES NO WARRANTS OR
REPRESENTATIONS REGARDING THE FITNESS OF CINEMASTER
FOR ANY PURPOSE WHATSOEVER.

QUADRANT INTERNATIONAL ASSUMES NO LIABILIT Y FOR LOSS OF
DATA OR FOR THE LOSS OF INCOME, OR EXPECTATIONS OF
INCOME, THAT MIGHT DERIVE THROUGH THE USE OR MIS-USE OF
THIS PRODUCT.

QUADRANT INTERNATIONAL WILL NOT BE HELD LIABLE FOR THE
CRIMINAL USE OF ITS PRODUCTS.

Information in this document is subject to change without notice and does not
represent a commitment on the part of Quadrant International. The software
provided for CineMaster is designed to work acceptably well under the
conditions described in this document.

Rev. 1.0 September, 1997

P/N 100845

CineMaster User’s Guideii

FCC Statement

NOTE: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

User’s Guide CineMaster iii

CineMaster User’s Guideiv

CE Statement

This equipment has been designed to comply with the requirements for CE Mark
Certification, pertaining to products intended for sale within the European
Union.

User’s Guide CineMaster v

VCCI Statement

This equipment has been designed to comply with the requirements for VCCI
Certification, pertaining to products intended for sale within Japan. It has no t
formally been certified.

Dolby® Statement

Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and
the Double-D symbol are trademarks of Dolby Laboratories. Confidential
Unpublished Works. ©1992-1997 Dolby Laboratories, Inc. All Rights Reserved.

CineMaster User’s Guidevi

Introduction

CineMaster Overview

This User’s Guide covers the CineMaster C-1.2D DVD Decoder board and
DVD Player software.

Features

MPEG-2 video decoding in hardware  MPEG-2 is the compression
standard used with DVD. This compression method allows over two
hours of crisp, clear video to be stored on the first DVD discs.

Dolby® Digital Sound (AC-3) decoding in hardware  CineM aster
delivers full 5.1 channel digital audio out to the S/PDIF connector.

Multi-Language Support  CineMaster supports software selection
of up to 8 different languages from any DVD source containing
multilingual audio channel information.

Sub-Picture Decoding / Sub-Title  Up to 32 sub-picture streams, as
well as sub-titles, text, and closed-captioning, can be decoded by

CineMaster and presented to the user.
Parental Control  Playback of DVD discs that feature Parental

Management can be selectively disabled, so discs containing material
inappropriate for children cannot be viewed without parental consent.
In addition, if there are multiple versions with different ratings, you can
select the rating you wish to view.

Wide-Screen/Pan-Scan  CineMaster supports all of the DVD
formats for video presentation and aspect ratio.

Multi-Angle and Special Sequences  CineMaster provides for
playback of movies filmed with multiple cameras, allowing the user to
choose the angle, and to include special sequences that have been
specified by the film director (“Director’s Cut”).

User’s Guide CineMaster 1

Navigation Commands  Users can interact with and customize the
presentation of the DVD video material because CineMaster supports
DVD Navigation Commands issued by the DVD playback application.

Windows 95 Plug-and-Play Installation  CineM aster is a Plug-n­Play card and is Windows 95 compatible. Just insert the card into a
PCI slot, install the driver software, and enjoy the powerful new digital
video features. There are no installation hassles, no IRQ conflicts, and
no I/O Port settings to adjust!

VMI 1.4  VMI is a method for connecting a VGA card directly to a
source of digital video such as CineMaster using an internal ribbon
cable. This direct connection allows CineMaster to send its video data
directly to the VGA card in a way that allows the VGA card to perform
filtering and other functions on the video.

CineMaster C-1.2D Specifications

Hardware Interface

PCI 2.1 compliant Bus Master, 32-bit host interface
Intel / Microsoft Plug-and-Play compliant
VMI compliant

Copy Protection Support

Formats: CSS (Content Scrambling System)

Regional coding lockout

Video Support

Content Standards NTSC or PAL
Content Aspect Ratios 4:3, 16:9
Video Port Interface Support VPE (DirectX 5)

Audio Support

Output Formats: Dolby Digital  S/PDIF

Audio Pass-Through for playing CD/DVD audio through sound card

CineMaster User’s Guide2

Stereo  2 channel to sound card

Getting Started

General Installation Instructions

PCI Bus Compatibility Guidelines

CineMaster must be installed in an open 32-bit PCI slot with PCI bus
mastering. Refer to the manual shipped with your computer or
motherboard to make sure that the open PCI slot that you select has bus
mastering capabilities. For example, the manual should contain a
statement similar to: “Each 32-bit PCI slot supports PCI mastering”.

Video Port Compatibility Guidelines

VMI Interface

CineMaster uses a VMI 1.4 compliant interface to deliver high-quality
digital video data to the VGA card using a direct-connect cable. The
software interface for the VMI port on CineM aster is VPE, which is a
part of Microsoft’s DirectX 5.

NOTE: You must have DirectX 5.0 installed in your system for
CineMaster to play DVD Video over a VIP/VPE connection. Dell has
already factory-installed DirectX 5.0 for you.

User’s Guide CineMaster 3

(This Page Intentionally Left Blank.)

CineMaster User’s Guide4

Hardware Installation

Before you begin installing the CineMaster card, check your
computer’s reference manual to locate the internal PCI expansion slots
with bus mastering. Read any instructions in the manual describing
how to use the expansion slots before installation.

WARNING: To install the CineMaster card, you must open you
computer and handle some of he internal components. Exercise

caution at all times when working with AC powered equipment.
Turn off and unplug your computer before you begin this
procedure.

1. Turn the computer and all peripheral devices off.

2. Unplug the computer from the AC power outlet.

3. Remove the cover from the computer. (Refer to the computer
manual for instructions.)

Note: Check the manual for your computer or motherboard to select an
open PCI slot that is capable of bus mastering. Always discharge static
electricity before handling the CineMaster card or inserting the card
into a slot. To discharge static electricity from your body, touch any
grounded metal surface. Always handle the card only by the metal
bracket, avoiding contact with any components.

User’s Guide CineMaster 5

4. Remove the slot cover for an open PCI slot designed for bus
mastering on the computer’s motherboard. A single screw is
generally used to secure the cover. Save the screw for installing
the CineMaster card later. Refer to Figure 1.

Figure 1: Removing the slot cover from an open PCI slot.

5. Carefully remove the CineMaster card from its anti-static
envelope.

CineMaster User’s Guide6

6. Hold the CineMaster card by its edges and insert it into the open
PCI slot. Press the card firmly into the slot connector applying
even pressure until the card is completely seated in the connector.
You may have to gently rock the card from end-to-end in order to
seat it properly. Refer to Figure 2.

Figure 2 : Inserting the
slot.

CineMaster

card into the open PCI

Note: The CineMaster card must be seated properly and should not
touch any other card or components on the motherboard in you system.
A short circuit or system damage may occur if the CineMaster card is
in contact with other components, or if any card is ever inserted or
removed with the power on.

7. Insert and tighten the screw to attach the card to the support
bracket or the computer’s case.

User’s Guide CineMaster 7

8. Connect one end of the long audio cable to CineMaster’s MPC-3
Audio Input connector, and the other end to the DVD-ROM drive’s
Audio Out connector. Then connect CineMaster to the sound
card’s connector that formerly went to the DVD drive, by
connecting one end of the supplied short audio cable to
CineMaster’s MPC-3 Audio Output connector, and the other end
to the sound card connector. Refer to Figure 3.

Figure 3:

CineMaster cable

connections

9. Connect the supplied ribbon cable from the 26-pin VMI Video Port
Connector on CineMaster to the matching Video Port Connec tor
on your VGA Card.

CineMaster User’s Guide8

Note: Be sure to align the connector properly with the pins.

Typically, the ribbon cable will have a red stripe running alo ng one
edge. This edge should be nearest to Pin 1 on the Video Port
Connector, located nearest to the metal bracket.

10. Replace the computer cover and plug in the computer.

11. At this point you can connect an AC-3 Decoder/Amplifier to the
S/PDIF output connector on the rear bracket.

Note: Inferior quality signal cables or excessive cable length can

degrade your sound and video quality.

12. Power on the computer and proceed to the Software Driver
Installation section.

User’s Guide CineMaster 9

(This Page Intentionally Left Blank.)

CineMaster User’s Guide10

Software Driver Installation

CineMaster is a Plug and Play device, and Windows 95 will recognize
the card the first time you boot after the card is installed. Once
Windows 95 recognizes the card, it will look for CineMaster device
drivers and if it does not find any, it will ask you to insert the disc
containing the device drivers.

These device drivers are contained on an installation CD-ROM. The
CD-ROM contains multiple copies of the CineMaster files in different
directories, with each directory containing exactly one copy in a
specific language. T he following procedure describ es the process for
installing this software.

Note: The driver installation disc may contain a ReadMe file. It is
highly recommended that you read this file for last-minute changes and
notes that may not be included in this User’s Guide. Windows 95’s
WordPad (in the Accessories folder) can be used to read this file.

1. When you boot Windows 95 for the first time, it will detect the
CineMaster DVD Decoder card and ask you to allow it to search
for device drivers for it. Select

to proceed.

Next

Figure 4: Request to search for drivers

User’s Guide CineMaster 11

2. Windows 95 will examine the floppy drive (A:\) for drivers, and
when it doesn’t find any, it will display the following window.
Insert the installation CD-ROM into the DVD-ROM drive and
click on the

Figure 5: Unable to locate drivers

Other Location

3. In the new window that opens, select

button.

Browse

, and then the DVD-

ROM drive, and then the la nguage directory that you wish to use

OK

for the installation (e.g. D:\English\) and then click on

.

Figure 6: Search other locations

CineMaster User’s Guide12

4. Windows 95 will detect the drivers and present the window below.

Finish

Click on

Figure 7: Finish the installation

and the drivers will be copied to your hard disk.

5. When the installation is complete, you will be prompted to reboot
your computer. Click on

OK

to do so. When Windows 95 restarts,

the CineMaster drivers will be installed and ready for use.

User’s Guide CineMaster 13

(This Page Intentionally Left Blank.)

CineMaster User’s Guide14

DVD Player Software Installation

Installation

Note: The installation procedure described in this sectio n assumes the
application is supplied on floppy disks.

If the application is provided on a single CD-ROM, the following
procedure still applies  wherever references are made to individual
floppy disks, simply insert the single CD-ROM disc and reference the
appropriate drive letter for your DVD-ROM drive (e.g. D:\ or E:\).

The DVD Player is supplied on a set of two floppy disks labeled
“ DVD P

ISK 2 OF

D

process.

Note: It is strongly recommended that you exit all Windows programs
before you begin this installation procedure.

LAYER DISK 1 OF

2”. The following procedure describes the installation

2” and “DVD P

LAYER

1. Insert the “ DVD P

LAYER DISK 1 OF

2” disk into the

3.5” drive slot on your computer.

2. Click on the Start button in the bottom left corner of the Windows
95 screen, then select Run from the list of options that appears.

3. Type a:\setup or b:\setup depending on the ID of the drive in
which you’ve inserted the installation disk.

4. Just follow the simple on-screen instructions to complete the
installation process. The installation program will copy files to the
hard disk and create a Windows program group or folder with an
icon for starting the DVD Player.

That’s it; you can now play DVD titles on your computer!

Note: The installer will not ask for Disk 2 if it is not needed for
installation in your system; this is not abnormal.

User’s Guide CineMaster 15

Starting DVD Player

To start the software, Click on the Start button in the bottom left corner
of the Windows 95 screen, then select Programs, then DVD Player
and then DVD Player.

DVD Player opens a playback window that is the same size as the
playback window when you last exited DVD Player, and opens the
Panel Control window in the same location as it was when you exited

DVD Player. (If you have not used DVD Player yet, it will use
internal defaults.)

Note: If you did not have the Pa nel Control window open when you
last exited DVD Player, it will not open the next time it is run. You
will need to use the menu to open the Panel Control window. Refer to

the instructions on page 19 to access this menu.

Proper DVD Disc in Drive

If you have a DVD Disc in your DVD-ROM drive when the DVD
Player is started  and the region code on the disc matches the region

code of your CineMaster board  the title will begin playing
immediately.

CineMaster User’s Guide16

Improper DVD Disc in Drive

If you have a DVD Disc in your DVD-ROM drive when the DVD
Player is started  and the region code does not match the region code

of your CineMaster board  the title will not play and an error
message (shown in figure 8) will be displayed.

Figure 8: Error message displayed when attempting to play content with

a region code that does not match the region code of the
CineMaster hardware.

Note: If a DVD disc is detected to be an illegal region, the Eject button
on the drive can be used to eject the disc. The Eject button in the DVD
Player software always works. If content is playing, confirmation to

eject the disc is requested. To prevent Windows 95 synchronization
problems, the Eject button on the DVD-ROM drive itself is disabled at
all times except when the disc is stopped.

User’s Guide CineMaster 17

No DVD Disc in Drive

If you do not have a DVD Disc in your DVD-ROM drive when the
DVD Player is started the window on the VGA display will display the
default DVD logo (shown in Figure 9).

Figure 9: DVD Player's Idle Screen (no title playing)

CineMaster User’s Guide18

Using DVD Player

Once you have ope ned the DVD Player, you can access DVD Player
functions by moving the mouse pointer over the DVD video viewing
area (window or full screen mode) and single- clicking the right mouse
button. The following menu items will appear. Each are described in
detail following this summary.

3. Time Search  Opens a window to change your playback position
within a DVD title based on total time.

4. Chapter/Title Search  Opens a window to change your
playback position within a DVD title based on chapter positions.

5. Numerical Keypad  Opens a window to enter numerical values
for DVD navigation (e.g. selecting a chapter, when this feature is
supported by content).

6. Settings  Opens a multi-tabbed window that provides access to
various settings and controls for CineMaster.

7. Video Window Size  Opens a sub-window to select various
window sizes for video playback on the VGA display.

• Default Size - This menu item restores the video window to its

default size based on the video standard and aspect ratio in the
DVD title.

1. Panel Control  This is the

main Control window for
playing DVD titles.

2. Angle Control  Opens a

window to change the
viewing angle to any angle
supported by the current
DVD title.

User’s Guide CineMaster 19

• Full Screen - This menu item resizes the video window to Full

Screen using DirectDraw Overlay capabilities. Any other
DVD Player windows that are open will remain open (e.g.
Chapter/Title Search, Settings, etc.)

• Window - This menu item resizes the vide o window to a non-

full screen window with a title bar; mostly used when in Full­Screen mode.

• Cinema - This menu item resizes the video window to Full

Screen using DirectDraw Overlay capabilities, and closes all
other open DVD Player windows to provide a TV-like display.

8. Exit - This menu item stops the DVD title playing and exits the
DVD Player.

CineMaster User’s Guide20

Panel Control

The Panel Control provides the main Control window for playing DVD
titles. There are two rows of buttons, described below (in order from
left to right):

Top Row (from left to right):

• Close Panel Control

• Eject the current DVD disc

• Resume playback after viewing a Root or Title menu

• Navigate UP when in a Root or Title menu

• Select the current item in a Root or Title menu

• Jump to the Title menu

• Play or Pause the current DVD Video

• Stop playback of the current DVD Video

• Rewind the current DVD Video

• FastForward the current DVD Video – if the current DVD Video is

paused; this button will act as a Single Frame Advance until the
DVD Video returns to normal speed playback

• Slow Motion playback; multiple clicks on this button will cycle
through multiple speeds of slow motion playback

• Access the Angle Control window

User’s Guide CineMaster 21

Bottom Row:

• Adjust the volume of the DVD Playback

• Toggle the LED display between the Time Elapsed, Time

Remaining, and Total Time

• Navigate LEFT when in a Root or Title menu

• Navigate DOWN when in a Root or Title menu

• Navigate RIGHT when in a Root or Title menu

• Jump to the Root menu

• Rewind the DVD Video to the beginning of the current chapter

• Back up one level from within a Root or Title menu

• Jump back one Chapter in the current DVD Video title

• Jump forward one Chapter in the current DVD Video title

• Access the SubTitle settings window

• Access the Spoken Language settings window

Angle Control

requested angle – this may or may not be the currently playing angle
depending on whether or not that angle is available in the current
chapter.

The Angle Control has two buttons:

• Display previous angle

• Display next angle

The LED display indicates the current

The number of angles displayed in the drop-down list in the Angle
Control is the maximum number of angles encoded on the entire current
DVD disc. This number does not indicate how many angles are
available in each chapter, only the total maximum in all chapters.

When you select an angle, a request is sent to play that angle. If that
angle does not exist in the current chapter, the current angle will
continue playing until a new chapter is reached that does have the
requested angle. When that chapter is reached, the new angle will be
played. When that chapter finishes, the selected angle will continue
playing if the new chapter also contains that angle; otherwise it will
return to angle 1.

CineMaster User’s Guide22

For example: You select Angle 3

Angles Available: 1 3 4 2
Angle Played: 1 3 3 1

Time Search

Chapter/Title Search

Chapter 1 Chapter 2 Chapter 3 Chapter 4

• Time Search has a

slider to display and
control the current
playback location of
the current DVD
title.

The slider can be
dragged to any
position in the title.

Chapter/Title Search
displays a list of
chapters available in the
current DVD title, and
provides three options:

• Go to the Previous

Chapter of the
current DVD disc

• Go to the Next

Chapter of the
current DVD disc

Scan

• If

when yo u

is checked

Close

this
window, the Scan
process will begin.

Scan

will play the beginning of each chapter for a specified duration,

and then jump to the next chapter until the end of the title is reached, or

Scan

you deselect the

checkbox.

User’s Guide CineMaster 23

Numerical Keypad

The Numerical Keypad allows you to enter numerical
information for DVD menu selections, such as Root or Title
menus. The most common example of this would be to
select a specific scene to jump to. However, these numeric
sequences are "requests" and they may or may not be used
by the DVD title.

For example, the DVD title GoldenEye allows the user to
enter a numeric sequence to select a specific scene to jump
to for playback, but Lethal Weapon and Glimmer Man do

not respond to these numeric sequences.

In cases where numeric sequences are ignored, you can use either CineMaster’s
exclusive direct on-screen mouse click capability or the Navigator Control
window’s buttons (up/down/left/right/enter) to make selections.

Spoken Language

This allows you to choose
a language to listen to
from any of the language
available in the current
title. Pull down the listbox
to see your choices.

CineMaster User’s Guide24

SubTitle

This allows you to select
which of the languages
available on the current
DVD title you want the
subtitles to appear in.

Check the

Enable SubTitles

box to display subtitles.

Uncheck the

SubTitles

box to not

Enable

display subtitles. When
this box is unchecked, the
language selection is not
used.

Note: DVD titles have the ability to execute software on the playback system.
Occasionally, a DVD title will instruct DVD Player to do something that will
override a setting that was in force.

A good example of this is the disabling of subtitles or other subpicture content.
This usually occurs at the beginning of a chapter or at some other transition
point. If you have the

Enable Subtitles

box checked, and they are being
displayed as requested, then occasionally, after navigating to a specific place or
choosing a selection from the root menu, subtitles will stop being displayed.
This is because DVD Player was instructed by the disc to stop displaying them.
You need to bring up the Subtitle Settings, uncheck the

Enable Subtitles

box,

then re-check it to turn them back on.

User’s Guide CineMaster 25

Parental

This allows you to request
which rating level of the
current DVD title you wish
to view.

Note: If the rating you
select is not available in
the current DVD title, the
default rating level will be
played! This setting
should not be relied on to
prohibit playback of
sensitive material!

If you want to prevent
unauthorized users from

changing rating levels, click on the

Enable Password Protection

box.

The first time you change a rating level you will be prompted for a
password. After you enter this password, any future attempts to switch
to this rating will require the same password. After a password has
been entered, you will need to re-enter a valid password to uncheck the

Enable Password Protection

setting.

These passwords are stored in the

In order to change a password, click on the

DVD Database

Change Password

for all titles.

bring up the Change Password window. You must first enter the
current password to confirm that you have permission to change the
password. You will also be asked to enter the new password twice to
prevent mis-spellings and typing errors. Passwords are case-sensitive,
meaning that lower-case letters are not the same as upper-case letters.
"Password", "password", and "PASSword" are all different passwords.

CineMaster User’s Guide26

button to

Display

This allows you to control
the DVD playback window
on your VGA screen.

Always on Top

•

make the DVD video
window stay on top of
windows from other
applications, even
when they are active.

Resize Proportional

•

will restrict window
sizes to proportional
sizes only.

Snap to best video quality sizes

•

will restrict the video playback
window to scale to only those sizes that exhibit minimal
downscaling artifacts.

Arbitrary sizi ng

•

will allow the video playback window to be scaled
to any size, though certain sizes will show more scaling artifacts
than others.

will

User’s Guide CineMaster 27

Picture

This allows you to adjust
the brightness and color
temperature of the video
displayed on your VGA
monitor.

The Brightness slider
adjusts the brightness of
the video; left is darker,
right is brighter.

The R, G, and B sliders
adjust the individual values
of the Red, Green, and

Blue components of the
video. Moving these sliders left reduces the amount of that color in the
video, and moving these sliders right increases the amount of that color
in the video.

These settings are adjusted immediately when you move the slider, and
saved in the DVD Player preferences. If you want to restore the

Default

settings to the default settings, press the

button.

CineMaster User’s Guide28

(This Page Intentionally Left Blank.)

User’s Guide CineMaster 29

Advanced Settings and Troubleshooting

Determining Driver Versions

When trying to determine the cause of a potential problem, it is
important to know the versions of various drivers and app lications that
are in use in your system. The CineM aster driver version is disp layed
in the Version tab of the CineMaster Properties driver dialog box.

To access this tab, open Windows Explorer, single-click with the right
mouse button on the file
select Properties from the pop-up menu, and then single-click with the
left mouse button on the Version tab. The version is displayed near the
top of the dialog box.

C:\WINDOWS\SYSTEM\CINEMST2.DLL

, then

CineMaster User’s Guide30

Determining DVD Player Versions

The DVD Player version is displayed in the
box for the application. To access this box, single-click with the left
mouse button on the DVD icon in the upper left corner of the video
playback window, select the
version will be displayed in the dialog box that appears.

About DVD Player…

About DVD Player…

menu item, and the

dialog

User’s Guide CineMaster 31

(This Page Intentionally Left Blank.)

CineMaster User’s Guide32

General Troubleshooting: Questions, and Answers

Installation Questions

Q: When I re-installed Windows 95 in my system, CineMaster

would no longer play back DVD titles. How do I get it to play
again?

A: W hen Windows 95 is re-installed on a system that previously had

CineMaster installed, it resets some important system settings that
CineMaster needs to be able to playback DVD content. When
CineMaster is installed AFTER Windows 95, then these settings
are adjusted properly and CineMaster can playback DVD content.

The solution is to re-install CineMaster, which can be done by
following the procedure below:

1. Move the mouse pointer over the

My Computer

icon on
your Windows 95 desktop, and click once on the right
mouse button.

2. Click on the

Properties

button, and when the
click once more on the

3. Click on the small

menu item with the left mouse

System Properties

Device Manager

sign to the left of the

+

window opens,

tab.

Other Devices

entry to expand the list to see the entry for CineM aster
(CineMaster will be listed here as an

, because Windows 95 reset the system settings.)

Device

PCI Multimedia

Click once on the CineMaster entry and then click on the

Remove

button.

4. A new window will open asking you to confirm the
removal; answer

, and the incorrectly installed

Yes

CineMaster will be removed.

5. You can now reboot your system, and follow the
procedure listed in the Software Driver Installation
section.

User’s Guide CineMaster 33

Playback Questions

Q: Why does my AC-3 audio sometimes pause or pop when I’m

playing movies?

A: Windows 95 supports background processes, which are small

software programs designed to improve performance of certain
applications or perform other functions without requiring you to
manually launch them. These background processes can
sometimes interfere with continuous processes such as playing
audio and/or video which have specific requirements for sustained
data rates. These applications should be disabled whenever
possible. Examples include screen-savers, anti-virus software, fax
receive and answering machine software, Microsoft’s Office95 Fast
Find, etc.

Q: When using Windows 95 MediaPlayer to play standard

MPEG-1 or MPEG-2 video files, I sometimes get thin, hazy
lines along the left and bottom edges of the video display; why?

A: Most MPEG-1 and standard MPEG-2 content is not as carefully

produced as DVD titles, and it is possible for these thin, hazy areas
to appear at the extreme edges of the video content when played
back. This effect should never be visible on professionally
mastered DVD content.

Q: Why can’t I play encrypted (*.vob) files with MediaPlayer?
A: Media Player does not initiate the Authentication process necessary

for an encrypted DVD stream to be decrypted. Attempts to play
these encrypted files (with .VOB extensions) will result in no video
played. The authentication process is initiated in DVD Player,
which should be used to play all encrypted content.

CineMaster User’s Guide34

Q: Why can’t I play certain unencrypted (*.vob) files with

MediaPlayer?

A: Attempts to play unencrypted .VOB files works properly with most

DVD-ROM drives, although some newer drives do not allow the
playback of unencrypted .VOB files without at least basic
authentication functionality.

If you experience problems playing unencrypted content with
Media Player, try using DVD Player to play the same content. If it
plays, the drive does not completely support the playback of
unencrypted DVD data.

Media Player will typically play unencrypted .VOB files if you can
see a directory listing of the files on the disc from Explorer, which
works, for example, on a Toshiba DVD ROM drive.

Q: When I try to Suspend my computer, why do I get an error

message indicating that I cannot suspend while playing video?

A: To decode a DVD stream, the player needs to know some

information about the previously decoded portions of the stream.
Suspending the system and then re-starting it does not provide a
way to “remember” the previously decoded stream and therefore
cannot be done while DVD video is playing.

Q: I’ve inserted a DVD disc in the DVD-ROM drive with DVD

Player running and it did not start playing. Why?

A: In the drivers for most DVD-ROM drives, there is an option that is

commonly turned on by default called Auto-Insert Notification,
which lets the operating system know when a DVD or CD disc is
inserted into the DVD-ROM drive. The purpose of the feature is to
begin running software or to b egin playback of a disc when it is
first inserted into the drive, without the need for running an
application.

If this option is turned off, our DVD Player application is not
notified that you inserted a DVD disc. To turn this option on, use
the following procedure:

User’s Guide CineMaster 35

1. Select CONTROL PANEL from the SETTINGS list in the
START menu.

2. Double-click on the SYSTEM icon, then select the DEVICE
MANAGER tab.

3. Locate the CD-ROM listing, and single-click on the entry for
your DVD-ROM drive.

4. Click on the PROPERTIES button, and then the SETTINGS
tab.

5. Locate the checkbox labeled AUTO INSERT
NOTIFICATION and click on the checkbox to select it.

6. Click on OK to save the change. At this point, you may need to
restart Windows 95 for the change to become active.

Q: When playing the DVD title “Species” the menu buttons in the

Root Menu are not aligned with where I need to click to
activate one of the menu items. Why?

A: The on-screen navigation buttons are mis-aligned with the actual

"hot spots" for selecting those buttons. This is a confirmed
problem with the content on this disc, and the end-user should use
the up/down/left/right/enter buttons in the Navigator Control to
make selection in this title. Often, using these buttons will move a
"highlight" around, which can help locate the hot spots on Root
Menus so the mouse can be used in the future.

CineMaster User’s Guide36

Keyboard Shortcuts

DVD Player supports keyboard equivalents to allow more efficient
operation. The chart below lists the keyboard equivalents and their
functions. For more detail on the functions themselves, refer to the
User's Guide. Note: no Function keys (F-keys) are defined except the
standard Windows 95 ALT-F4 [Quit].

Keys available in all dialog boxes:

Key Combination Function
PAUSE Toggles video playback (Pause/Play)

CTRL + p Opens the Panel Control
CTRL + t Opens the Time Search Dialog Box
CTRL + a Opens the Chapter / Title Search Dialog Box
CTRL + g Opens the Angle Dialog Box
CTRL + s Opens the Settings Dialog Box
CTRL + u Opens the Numeric Keypad Window

CTRL + z Changes the VGA display to “Default Size”
CTRL + f Changes the VGA display to “Full Screen”
CTRL + w Changes the VGA display to “Window”

Appendix A

Keys Available in all Controls:

Key Combination Function
Left Arrow Navigate left in a DVD menu
Right Arrow Navigate right in a DVD menu
Up Arrow Navigate up in a DVD menu
Down Arrow Navigate down in a DVD menu
Return Select the current item in a DVD menu

User’s Guide CineMaster 37

Keys Available in all Controls (continued):

Key Combination Function
End Navigate back to the previous DVD menu
Page Up Jump to previous chapter
Page Down Jump to next chapter
Home Jump to start of current title

p Depends on current player activity:

• Pause – if playing

• Pause off – if paused

• Load DVD – if DVD tray open

• Stop Scanning – if scanning (forward or

backward)

• Start Presentation – if in a menu

r Access Root Menu
g Enable / Disable Bitstream data rate gauge
s Stop video playback
t Access Title Menu
b Start Backward Scan (Rewind)
f Start Forward Scan (FastForward)
e Eject current DVD Disc
m Mute audio
I Change Time Indicato r (Elapsed, Remaining, or

Total Time)

Keys available in Chapter / Title Search:

Key Combination Function
p Go to Previous Chapter
n Go to Next Chapter
z Toggle Scan checkbox on/off
c Close the Window
ESCape Close the Window

CineMaster User’s Guide38

Keys available in Numerical Keypad:

Key Combination Function
0,1,2,3,4,5,6,7,8,9 Enter the corresponding numeric value
Delete Clear all values
Backspace Clear all values
Return Select the current value
ESCape Close the window

Keys available in Settings:

Key Combination Function
o Select the OK button
c Select the CANCEL button
ESCape Select the CANCEL button

User’s Guide CineMaster 39

(This Page Intentionally Left Blank.)

CineMaster User’s Guide40

Appendix B

RIVA 128 Video Resolutions Supported

The nVidia RIVA 128 VGA chip, used in the STB Velocity 128 VGA
card, is capable of displaying high resolutions in vario us color depths.
Many of these displays also support the bandwidth necessary to display
DVD video. The table below lists these display modes.

RIVA 128 Display Modes that support DVD Video

Resolution Color Depth Refresh Rate (Hz)

640 × 480

800 × 600

1024 × 768

1152 × 832

1280 × 1024

1600 × 1200

8-bit 85, 75, 60
16-bit 85, 75, 60
32-bit 85, 75, 60

8-bit 85, 75, 60
16-bit 85, 75, 60
32-bit 85, 75, 60

8-bit 85, 75, 60
16-bit 85, 75, 60

8-bit 85, 75, 60
16-bit 85, 75, 60

8-bit 85, 75, 60
16-bit 85, 75, 60

8-bit 76, 75, 60

User’s Guide CineMaster 41

(This Page Intentionally Left Blank.)

CineMaster User’s Guide42

Glossary

Appendix C

AC-3 (Dolby Digital) –

An AC-3 stream contains 5.1 channels of digital audio (full 44.1 kHz, 16-bit
digital channels for left, right, center, left surround, right surround, and an
additional low bit rate channel for subwoofer information). AC-3 data is
normally transferred digitally from a coaxial or optical S/PDIF output
connector to an AC-3 decoder or amplifier for playback.

Angle Control –

which scene is displayed when the DVD content contains multiple angles. This
multiple angle content is unique to DVD because previous compression
standards did not support the simultaneous compression of more than one
video sequence. Multiple angles are a result of filming the original production
with more than one camera, and they can be used to assemble “different”
versions of the same movie, such as a “Director’s Cut.”

Aspect Ratio –

(or of a pixel making up a video frame).
therefore televisions in t he U.S., which are o nly somewhat wider than they are
high).
the screen is 16-ninths (178%) wider than it is high. Many non-U.S.
televisions are built to display this format.

The relationship between the width and height of a video frame

, also called “letterbox” i s the format used i n movie theat ers, where

16:9

A Dolby Laboratories specification for digital audio.

Angle control allows the user playing a DVD title to select

is the standard for NTSC (and

4:3

User’s Guide CineMaster 43

Bandwidth –

The amount of data that can be transferred to or from a graphics
card in a given length of time. Typically, when playing back digital video, the
write data bandwidth of the VGA card is most important. The amount of
bandwidth available is dependent on the type and speed of memory used on the
VGA card, on the efficiency of the VGA controller’s hardware, and on the
current display mode (because high-end modes consume more memory read
bandwidth due to display updating). A VGA card that does not simultaneously
have sufficient read bandwidth to update the display and write bandwidth to
accept live video data may not produ ce an acceptable q uality image unless less
video data is written or the display mode is changed to one that is less
demanding. Available bandwidth is directly related to, and the best measure of,
VGA card performance.

Chapter (in a DVD title) –

Divisions of a DVD title that are defined by the
content provider. Chapters normally begin at a particular scene in a movie, and
break it down into smaller portions, analogous to tracks on an audio CD. DVD
allows random access, and the “Jump to a scene” option in many root menus
actually goes to the beginning of a chapter that contains that scene.

Chrominance –

The portion of the analog video signal that carries all of the
color information (hue and saturation). The chrominance signal (C) is carried
as a separate channel on the S-video output, but is mixed with the luminance
(Y) signal to create Composite video.

Color Depth –

A representation of how much digital data will be used to
encode (digitally represent) a pixel in the display memory. It relates directly to
how many colors a pixel can be. An 8-bit color depth allows a pixel to be one
of 256 colors. A 16-bit color depth allows a pixel to be one of 65,536 colors,
but obviously requires twice as much memory to store. A 24-bit color depth
allows a pixel to be one of 16.7 million colors. The 24-bit color depth is also
called “true color”, becau se a pixel can be any colo r that the eye is capable o f
seeing. Together with resolution, color depth defines a display mode.

Composite video –

A single video signal that contains all the information
(sync, color, and intensity) necessary to form a complete image on a video
display or recording machine. A composite signal co nt ain s a sync pu lse, a col or
burst and modulated luminance and chrominance subcarriers. Composite
video, like S-Video, is encoded according to one of the video standards
(NTSC, PAL, or SECAM).

CineMaster User’s Guide44

Compression –

Reduction of the amount of data used to represent a signal.
Uncompressed video data requires an enormous amount of digital data, making
it impractical to store or transfer without processing. Compression algorithms
were carefully developed to minimize the perceived quality loss; these are
applied to reduce the data rate for storage and playback.

CVBS –

Composite Video Baseband Signal. Often referred to as composite

video signal or CVS.

Deinterlace –

The process of combining o r otherwise u sing in terlaced odd and
even fields in a video signal to create non-interlaced video frames. The actual
method for accomplishing this can be as simple as discarding all of the even (or
odd) fields, or as complex as using a hardware digital filter to combine the odd
and even fields into full frames.

Dolby ProLogic –

A method (created by Dolby Laboratories) for encoding
Surround Sound information onto two-channel analog output. The information
is phase-encoded, and can be decoded into the separate Surround channels by a
ProLogic decoder or amplifier.

DirectX (DirectDraw) –

Microsoft Corporation’s standard interface for
applications that provides software applications with a mechanism for
accessing functions that relate to digital video, hardware scaling, and other
useful functions that can be supported by a display controller. DirectDraw is a
part of DirectX, and contains, for example, such functi ons as “Overlay”, which
is a hardware scaling capability. This interface is defined in explicit detail, and
can be implemented into the display card (VGA) drivers. DirectX is additional
functionality that can be added to Windows 95 by installing it. When DirectX
is installed, and supported in the VGA drivers, its capabilities then become
available to applications, eliminating the need for hardware-dependent code.
Not all VGA cards that have Direct Draw drivers can do hardware scaling
(Overlay).

Display Mode –

The combination of color depth and resolution that defines

how a computer display (and, typically, video played on it) appears.

User’s Guide CineMaster 45

A specification for storing digital data (usually high-quality video and

DVD –

audio) on a read-only disc that is th e same physical size as a CD-ROM. DVD
discs have much higher data capacity (4.7 GB per layer) than CD-ROMs (680
MB). This enhancement allows them to contain not only 2.5 hours of video,
but also 5-channel 16-bit digital audio, multiple language playback, closed­captioning, and hypertext content. DVD is a standard that was developed by
ten companies known as the Consortium.

Encryption –

Part of the DVD specification that requires that the digital data
on the DVD disc be encoded in such a way that it cannot be read or decoded
except by authorized playback devices. This was necessary to protect the
content from illegal copying.

One complete vertical scan of an interlaced vi deo frame, representing

Field –

half of the data in the frame. A field consists of all of the scan lines (each made
up of pixels) that are on odd rows of the screen (“odd field”) or all of the scan
lines that are on even ro ws of the screen (“even field”). Each field, therefore,
contains half of the information in an interlaced video frame. Conventional
video technology that uses interlacing (such as televisions) first displays all of
the odd fields by displaying the top line (line 1), skipping a line (line 2),
displaying the next line (line 3), and so forth until all of the odd lines that make
up the field have been scanned. Then, the skipped (even) lines are displayed
(between the odd lines, where they belong), and this process of alternating odd
and even fields is repeated. Persistence (i.e., the ability of phosphor dots on the
screen to remain lit for a period of time) gives the appearance of a complete
image. Computer monitors are generally not operated in this manner; rather,
they are updated with all scan lines in sequence (line 1, line 2, line 3, etc.),
because they have shorter persistence phosphor and appear to flicker unless
every line is rescanned every frame.

Frame –

A single complete video image consisting of two interlaced fields (one

odd and one even).

CineMaster User’s Guide46

Interlace –

The process of repeatedly displaying (scanning) all the lines i n an
odd field followed by displaying all the lines in an even field. Interlacing
became part of video technology because early video equip ment an d t elevisi on s
could not operate at high enough frequencies to scan every line on the display
fast enough to produce a good quality image. It became so common that it has
been adopted as a standard part of the video industry. See also: Fiel d, Frame,
De-interlace.

Luminance –

The portion of the video signal that contains information on the
relative brightness content of the image. The luminance channel of any video
signal is the primary waveform encoded on the carrier signal. Traditio nal black­and-white televisions uses only a luminance channel (as a variable phase
subcarrier). In S-video, the luminance signal (Y) is maintained as a separate
channel.

Macrovision –

A method for copy-protecting analog video outputs, developed
by Macrovision Corporation. The DVD specification requires that this anti­taping mechanism be implemented on the S-video and Composite video
outputs to prevent piracy or videotaping of copyrighted material. The copy
protection operates by modifying the sync signal in such a way that VCRs are
adversely affected (causing them to record an unwatchable image) but that
display monitors and televisions are not.

A Microsoft standard method for applications to use for accessing

MCI –

multimedia functions (such as video or audio playback, volume control, etc.).
MCI Commands are fully supported in the

CineMaster

driver, allowing
applications developers to take advantage of the board’s capabilities without
needing to write device drivers or other hardware-dependent code.

MPEG –

The Moving Picture Experts Group. MPEG is a working group of
ISO/IEC in charge of the development of international standards for
compression, decompression, processing, and representation of moving
pictures, audio and their combination.

User’s Guide CineMaster 47

MPEG-1 –

A international standard of the Moving Picture Experts Group,
describing a compression method for digital video and audio. By eliminating
both temporal and spatial data redundancies, the MPEG-1 algorithm drastically
reduces the data size of digital video. Up to 72 minutes of full motion video
and audio can be compressed (up to 200:1) using the MPEG algorithm and
stored on a single CD-ROM. MPEG-1 is an asymmetrical compression
algorithm, so performing the computations required to compress a video
sequence is much more demanding than decompressing a sequ ence. Because o f
this, pictures are not stored as i ndividual images in the MP EG-1 stream, and
fully encoded MPEG-1 is not suitable for video editing. Also the lower
resolution (one-quarter broadcast quality) of a MPEG-1 stream will not provide
the image quality of an JPEG encoded image with full resolution. A MPEG-1
stream includes video I, P, and B frames and an audio MPEG stream.

MPEG-2 –

An broadcast-quality standard, also named after the Moving Picture
Experts Group, for generic coding of moving pictures and associated audio
information. This international standard for digital video compression and
digital television, builds on the MPEG-1 standard to support larger image sizes
and better image quality for use in professional and consumer applications.
Due to this higher image quality, MPEG-2 was chosen as the compression
method to be used for DVD. MPEG-2, like MPEG-1, is an asymmetrical
compression algorithm, so performing the computations required to compress a
video sequence is much more demanding than decompressing a sequence.

Navigation –

The process of accessing the parts o f a DVD data stream that are
not video or audio. Navigation data and navigation commands are supported in
the DVD specification, and are the mechanism that provides unique DVD
features such as interactivity and direct random access.

National Television Standards Committee of the Electronic Industries

NTSC –

Association, or their standard for video. Thi s United States committee, which
determines technical and broadcasting standards for domestic television,
created the definition for NTSC video  720×480 at 30 frames per second.
(The NTSC standard is also used for Japanese television.)

CineMaster User’s Guide48

Overlay (DirectDraw Hardware Overlay) –

One of the “capabilities”
(functions) supported in DirectX. This particular capability, which may or may
not be supported by a particular VGA chip (or its driver) provides the ability to
scale video up to larger than its original size (as defined in the NTSC or PAL
video standard). Overlay capability is necessary (but not sufficient) to do full­screen video playback on t he VGA screen when the desktop displ ay resolutio n
is 800×600 or higher.

- Phase Alternate Line. This is the video standard for most of the

PAL

European television systems  720×576 at 25 frames per second.

Abbreviation for PICture ELement, the smallest discrete unit of a video

Pixel –

display that can be individually controlled. Video resolution is determined by
the number of horizontal and vertical pixels that make up a display. The binary
representation of a pixel is stored in the display memory on the graphics card.

Region Coding / Regionalization –

A requirement in the DVD specificati on
that prevents DVD con ten t from bein g pl ayed in areas o f th e world for which i t
was not intended. DVD content contains (as part of the data stream),
information about the region it was made for (this is usually written on the disc
and on the package), and all DVD boards must play content from one (and only
one) region. Regionalization supposedly will allow movies to be released on
DVD in one area of the world while they are still in the theaters in other areas
of the world, reducing the length of time it takes them to go from the theater to
DVD.

Unlike composite, S-video or component video systems, computers

RGB –

normally use a color imaging model based on discrete channels of Red, Green
and Blue light. These colors, when combined at full intensity, create white
light. RGB provides the most flexible means for digital systems to represent
virtually any color in the spectrum in terms of the absolute amounts of Red,
Green and Blue light the color contains. Digital video is usually not stored as
RGB; rather it is stored as YUV.

User’s Guide CineMaster 49

Resolution –

In video terms, resolution is the relative density of information
that can be displayed, expressed in terms of the total number of horizontal and
vertical pixels. The higher the pixel count, the higher the resolution and the
greater the amount of detail that is displayable. A display that is 1024×768 has
1024 pixels per line and 768 lines per frame. Together with Color Depth, it
defines the

video mode

.

S-Video –

to another (such as from

A method for encoding video, or for transferring it from one device

CineMaster

to an S-video monitor), which achieves a
significant improvement in quality over the standard composite video encoding
method by preserving separate chrominance and luminance signals. S-Video is
sometimes referred to as component video. Like Composite video, S-Video is
encoded according to one of the video standards (NTSC, PAL, or SECAM).

The portion of the video signal that indicates to a monitor that it is at

Sync –

the end of a line or the end of a field or frame. When a sync p ulse is det ected,
the monitor starts a trace at th e beginnin g of the next li ne, or retu rns to the t op
of the screen. This signal is transferred to the monitor either as part of the
video (encoded in the Y component of S-video, or mixed with all of the video
signal components for composite video), or it is carried as separate horizontal
sync (HS) and vertical sync (VS), such as is the case for a VGA monitor. As
resolution and color depth increase, the frequencies of the horizontal and
vertical sync pulses also increase.

VideoInlay –

A new technique for displaying live video on a VGA display by
sending the data over the PCI bus. This doesn’t require a direct connection to
the VGA card and provides greater flexibility in the choice of VGA card used.
The digital video is scaled and converted (in hardware) to the computer’s
native RGB format (if needed), and the converted video is moved from the

CineMaster

card directly to the graphics card using advanced PCI Bus
Mastering Burst DMA (Direct Memory Access). This technique bypasses the
host processor to move video data as quickly as possible, leaving the computer
free to perform other processing tasks.

Abbreviation for Luminance and Chrominance, respectively; the two-

Y/C –

channel video signal standard employed by so-called "Super" or S-video
(S-VHS, Hi-8) equipment. The luminance channel carries information on the
relative brightness levels carried in the video frame. The chrominance chan nel
carries information describing the actual color content.

CineMaster User’s Guide50

A format for representing digital video using a color coordinate system

Y/U/V -

where Y provides brightness information and both U (also called Cr) and V
(also called Cb) contain color information. Digital video is typically stored in
this format. YUV data must be converted to RGB before it is displayed on a
monitor.

User’s Guide CineMaster 51

(This Page Intentionally Left Blank.)

CineMaster User’s Guide52

Technical Support

Quadrant International prepares specific releases of CineMaster for
each integrator of our product into their overall DVD product (either a
DVD-ROM Upgrade Kit, or as part of a DVD-ROM enabled computer
system). For that reason, it is necessary for the end owner of this
product to contact that manufacturer for technical support and service.

If you encounter any problems with the operation of your CineMaster
DVD Decoder, Dell provides a number of tools to help you. For more
information on these help tools and on obtaining technical assistance,
see the chapter titled "Getting Help" in your Diagnostics and
Troubleshooting Guide.

Quadrant International does not provide direct end-user support for
each of the unique variations of CineM aster that are sold throughout
the world.

Appendix D

User’s Guide CineMaster 53

(This Page Intentionally Left Blank.)

CineMaster User’s Guide54