Quadra-Fire Grand Voyager Zero Clearance Box, Voyageur Grand Zero Clearance Box, Grand Voyager Installation Instructions Manual
!
Introducing the Grand Voyager Zero Clearance Box
Now you can install a Grand Voyager
into a timber frame…
!
!
!
!
!
!
!
!
!
The Grand Voyager Zero Clearance Box allows the product to be installed into
a combustible wall, with minimum clearances and without brick or block work
using the framing dimensions and clearances illustrated below.
Zero Clearance Box Dimensions
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
**Dimensions are subject to change at our discretion, please check with our office for further details.
685!
560!
980!
685!
685!
980!
Zero Clearance Box Assembly Details
! !
Step 1
Lay down the bottom panel with folded
edges facing upwards, and the nonfolded edge turned frontwards.
!
Step 2
Screw rear spacer, inner left, inner right
and inner back panels together, with the
returns facing outwards.!
Step 3
Screw the inner top panel in place.
Step 4
Screw the 200mm collar in place.
Step 5
Screw the outer left, outer right and
outer rear panels in place with the vent
holes to the bottom, and the returns
facing outwards!
Step 6
Screw the outer top panel into place.
!
* Images for illustration purposes only, some detai ls may change
Loading...