QUAD C4, C4-16, C4-T, C6, C8 Instruction Booklet
...
C O N C O U R S E C S E R I E S
INSTRUCTION BOOKLET
MODELS C4, C4-16, C4-T, C6, C8, & CSUB
F O R T H E C L O S E S T A P P R O A C H T O T H E O R I G I N A L S O U N D
R E V.1
2
SAF ETY INST RU CTIO NS
Safety First!
1. Please read this manual fully before installing and operating this
product.
2. Retain a copy of this manual for future reference.
3. Comply with all warning labels and instructions.
4. Do not attempt the installation of this equipment unless you are
qualified to do so.
5. Protect your hearing from high sound pressure levels.
Rigging and Suspension
The rigging, suspension or mounting of these products can expose the
installer and members of the public to serious health risks and even death.
UNDER NO CIRCUMSTANCES ATTEMPT TO RIG, SUSPEND
OR OTHERWISE MOUNT THIS EQUIPMENT UNLESS YOU ARE
FULLY QUALIFIED AND CERTIFIED TO DO SO BY RELEVANT
LOCAL, STATE AND NATIONAL AUTHORITIES. ALL RELEVANT
SAFET Y REGULATIONS MUST BE FOLLOWED. IF YOU ARE NOT
PROPERLY QUALIFIED OR DO NOT KNOW OF PERTINENT
REGULATIONS, CONSULT QUALIFIED PERSONNEL FOR ADVICE
AND ASSISTANCE.
Limited Liability
QUAD Industrial assumes no liability whatsoever for any damage or loss,
either direct or consequential arising from the installation and use of these
products. Liability is limited to replacement of product or refund, at the
QUAD Industrial’s discretion. Your rights to compensation may vary by ter
-
ritory; consult with your local QUAD Industrial office or distributor.
Warranty & Service
These products are designed to be used as specified, and are warranted to
be free from defects in materials or workmanship. Warranty terms and con
ditions vary by territory. Please contact your local QUAD Industrial sales
office or distributor for complete details. Under no circumstances should
you attempt to repair these products. Doing so may limit or void warranty
coverage.
TA BL E OF CON TENT S
Introduction:
Safety Instructions ....................................................................... 02
Warnings & Disclaimers .............................................................. 02
Rigging & Suspension ................................................................. 02
Warranty & Service .................................................................... 02
Product Descriptions:
C4, C4-16, C4-T, C6, C8, & CSUB .............................................. 03
Product Features:
Product Diagram ........................................................................ 04
Components ............................................................................... 05
Dimension Drawings ................................................................... 06
Installation - Suspended Tile Ceilings:
Installation Instructions ................................................................. 07
Installation - Hard Ceilings:
Installation Instructions ................................................................. 09
Connections:
Input Connectors ......................................................................... 11
Number of Speakers Calculation .................................................. 11
Reccomended Wiring Scheme ...................................................... 11
CE Compliance:
Statement ................................................................................... 12
Product Specifications
Specifications ............................................................................. 13
Contact Information:
QUAD Industrial Contact Information ............................BACK COVER
3
PRO DUCT DES CR IPTI ON
The Concourse C series are two-way, high performance ceiling
mounted speaker systems designed for distributed music, paging
and speech applications. Packaged in pairs (except the C-SUB
and C-SUBT) and including all needed mounting accessories, the
C series models are complete vented speaker assemblies with a
metal back box, ABS front baffle and attractive metal grille. Each
model is available in both low-impedance 16Ω and constant-voltage 70/100V versions (with T suffix).
CON COUR SE C 4/ C4-1 6/C4 T
The Concourse C4 is a two-way ceiling mounted speaker system
consisting of a 4" cone low frequency driver and a 1" soft dome
tweeter. Speakers are packed in pairs and come complete with a
tile backing C-ring, mounting support rails plastic paint covers and
cardboard cutout templates. There are three versions available:
• Concourse C4 –
Selectable 4Ω/16Ω/70V/100V
operation, 30W transformer included
• Concourse C4-16 –
16Ω version, 25 Watts
• Concourse C4T –
70/100 Volt operation only,
30W transformer included
Concourse C6
The Concourse C6 is a two-way ceiling mounted speaker system
consisting of a 6" cone low frequency driver and a 1" soft dome
tweeter. Speakers are packed in pairs and come complete with a
tile backing C-ring, mounting support rails plastic paint covers and
cardboard cutout templates.
• Concourse C6 –
Selectable 4Ω/16Ω/70V/100V
operation, 50W transformer included
Concourse C8
The Concourse C8 is a two-way ceiling mounted speaker system
consisting of an 8" dual voice coil cone low frequency driver and
a 1" soft dome tweeter. Speakers are packed in pairs and come
complete with a tile backing C-ring, mounting support rails, plastic
paint covers and cardboard cutout templates.
• Concourse C8 –
Selectable 4Ω/16Ω/70V/100V
operation, 60W transformer included
Concourse CSUB
The Concourse CSUB is a ceiling mounted subwoofer system consisting of a 10" sub bass driver and integral low-pass crossover.
The CSUB is fitted with dual low-impedance voice coils allowing
connection to stereo power amplifiers at either 4Ω or 16Ω, or to
70/100V amplifiers through a built-in 100W transformer.
• Concourse CSUB –
Selectable 4Ω/16Ω/70V/100V
operation, dual 50W low impedance coils, 100W
transformer included
4
PRO DUCT FEATUR ES
All models include the following components:
• Speaker assembly (2)
• Cover grille with restraint (2)
• Split C ring backing plate (2)
• Support Rails (4)
• Plastic paint cover (2)
• Cardboard cutout template (2)
Please ensure that you are familiar with all of the parts and how
they are assembled before commencing the installation.
GRILLE
GRILLE TETHER
LF DRIVER
HF DRIVER
POWER TAP SWITCH
BEZEL
5
PRO DUCT DES CR IPTI ON
Concourse C models are complete assemblies
ready for installation into both suspended tile
ceilings and hard ceilings. A rear mounted terminal box allows termination of the speaker wiring
to the speaker as well as impedance selection
(except C4T and C4-16). Power taps are selected
on 70/100V versions through a front mounted
rotary switch.
Speakers are mounted by means of four mounting
clamps located around the rear face of the bezel.
A metal split C ring is provided to distribute the
clamping pressure evenly along the ceiling surface. A pair of metal mounting support rails are
provided for added support when the speakers
are installed in a suspended tile ceiling.
A seismic restraint point is provided on the rear of
the speaker to facilitate attachment of a restraint
tether to the building’s structure. The removable
front grille is also fitted with a restraint tether that
attaches to the inside of the bezel by means of a
supplied insert.
INPUT TERMINALS
BACKBOX
MOUNTING
CLAMPS
SPLIT C RING
SEISMIC
RESTRAINT
POINT
SUPPORT RAILS
MOUNTING
CLAMPS
IMPEDANCE SELECT SWITCH
Loading...