VAPYR-900
Haze Machine
Item ref: 160.488UK
User Manual
Version 1.0
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
160.488UK User Manual
Introduction
Thank you for purchasing the VAPYR-900 haze machine. This product has been designed to
provide controlled haze effects for stage productions and themed events. Please read and
keep this manual in order to achieve the best results from this equipment and avoid damage
through misuse.
Unpacking
The product should arrive with you in good condition with the following components.
• VAPYR-900 haze machine
• Timer remote control
• Mains lead(s)
If you find any accessory is missing or the machine has arrived with any problems,
please contact your local dealer at once. Please keep the original package and
invoice for any possible replacement or returned demand.
Warning
To prevent risk of fire or electric shock, do not expose electrical parts to rain or moisture.
If liquids are spilled on areas other than inside the fluid tank, disconnect the mains, allow the
VAPYR-900 to dry out and have it checked by qualified personnel before further use.
Avoid any impact, dropping or extreme pressure to the housing.
No user serviceable parts inside - do not open the case.
Allow the VAPYR-900 to acclimatize to room temperature before operating.
Placement
The VAPYR-900 has a built-in fluid container and should be operated in an upright position.
Ensure that the VAPYR-900 is positioned on a stable, non-slip surface.
Safety
• Check for correct mains voltage and condition of IEC lead before connecting to mains
• This unit must be earthed
• This unit uses a heating element – be aware that parts of the housing may be hot in use!
Cleaning
• Use a soft dry or slightly damp to clean the casing
• Do not use strong solvents for cleaning the housing
• Clean the haze mechanism periodically by operating with distilled water instead of haze
• It is also recommended to use fog machine cleaning fluid (160.670UK) periodically