Qtx SPL500M, SPL1000M, SPL Series, SPL700M, SPL1200M User Manual

SPL

Stereo Amplifiers

Order ref: SPL500M (178.821UK)

SPL700M (178.822UK)
SPL1000M (178.823UK)
SPL1200M (178.824UK)
SPL1500M (178.825UK)

User Manual

VERSION 1.0

SPL User Manual

Caution: Please read this manual carefully before operating

Damage caused by misuse is not covered by the warranty

Introduction

Thank you for choosing an SPL series amplifier for your stereo sound system. This product is
designed to power stereo speakers with a range of switchable inputs including a built-in digital
audio playback module. Please read and keep this manual for future reference.

SAFETY SYMBOL AND MESSAGE CONVENTIONS

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

AVIS

RISQUE DE CHOC ELECTRIQUE NE

PAS OUVRIR

This symbol indicates that dangerous voltage constituting a risk of electric

shock is present within this unit

This symbol indicates that there are important operating and maintenance

instructions in the literature accompanying this unit.

Warning

To prevent the risk of fire or electric shock, do not expose any components to rain or moisture.
If liquids are spilled on the casing, stop using immediately, allow unit to dry out and have
checked by qualified personnel before further use. Avoid impact, extreme pressure or heavy
vibration to the case
No user serviceable parts inside – Do not open the case – refer all servicing to qualified service
personnel.

Safety

• Check for correct mains voltage and condition of IEC lead before connecting to power

• Use only double-insulated wire for 100V connection to the mixer

Placement

• This unit can be used free-standing or fixed into a 19” rack

• Ensure adequate support and access to controls and connectors when rack-mounting

Cleaning

• Use a soft cloth with a neutral detergent to clean the housing as required

• Use a vacuum cleaner to clear ventilation grilles of any dust or debris build-ups

• Do not use strong solvents for cleaning the unit