Qtx SmartLight, SmartLight Series User Manual

SmartLIGHT User Manual Page 12

TECHNICAL SPECIFICATION:

See individual item for full details

For more information visit www.avsl-qtx.com

DISPOSAL:

Please disposal of an unserviceable device according to the current statutory
requirement

Errors and omissions excepted.
Copyright© 2012. AVSL Group Ltd.

SINGLE COLOUR PAR CANS

User Manual

VERSION 1.0

SmartLIGHT User Manual Page 2

INTRODUCTION:

LED SMARTLIGHT SINGLE COLOUR PAR CAN

The QTX SmartLIGHT family of LED Par cans have been designed for a variety of
applications, whether you’re a mobile DJ, a band/singer, a bar/nightclub, theater
company or production company then this range of PAR cans will cover most
requirements.

Please read this manual carefully to ensure you get the best out of these products.

This manual is a generic manual that covers all available single colour SmartLIGHTS
in the range

Contents:

Page 3 – 6 Product Safety and Installation instructions

Page 7 – 9 SmartLIGHT Product layout

Page 10 – 11 SmartLIGHT Operation and functions

Page 12 – 13 SmartLIGHT DMX Operation

SmartLIGHT User Manual Page 11

DMX

The fixture is equipped with 3-pin XLR connectors for DMX input and output. The SE
connectors are wired in parallel. Only use a shielded twisted-pair cable designed for 3-pin XLR­plugs and connectors in order to connect the controller with the fixture or one fixture with
another.

Building a serial DMX-chain:

Caution: At the last fixture, the DMX-cable has to end with a terminator. Solder a 120 Ohm
resistor between PIN 2 (-) and PIN 3 (+) into a 3-pin XLR-plug and plug it in the DMX-output
of the last fixture.