Qtx QX05PA User Manual

100.605UK User Manual

Portable Party Bluetooth® Speaker

QX05PA

Item ref: 100.605UK – White, 100.606UK – Blue, 100.607UK – Black

User Manual

Look no further for a portable powerful Bluetooth speaker, which is ideal for house gatherings and parties,
kid’s rooms and even festivals. Play your music direct from your smartphone or tablet using the Bluetooth
function and you can even sing along using the handheld wireless microphone. Not only does it have
Bluetooth connectivity, but you can also listen to audio from the built-in FM radio, the USB/TF (micro SD)
media inputs or the Aux line input (3.5mm jack) to stream your music. Power this great speaker by either
mains or the integral rechargeable battery, which lasts up to 10 hours on one charge. You can take this great
little speaker anywhere using the integrated carry handle or additional shoulder strap providing the ultimate in
portability.

Features

• Bluetooth wireless operation allowing connection to your portable devices.

• 5.25" Full range speaker provides great sound quality and 30W RMS output.

• Wireless VHF microphone included.

• Built-in rechargeable battery that lasts up to 10 hours on a single charge.

• FM radio.

• USB/TF (micro SD) media inputs.

• Aux line input (3.5mm jack).

• Wired microphone socket (6.35mm jack).

• Comes supplied with remote control and shoulder strap.

Technical Specifications

Power handling (RMS)

30 Watts

Speaker driver

5.25” full range

Bluetooth version

3.0

Microphone

Wireless VHF 175.0MHz handheld

SNR

71dB

Frequency response

20Hz - 20kHz

Input sensitivity

550±30mV

Power supply

AC100V-AC240V, 60Hz/50Hz

Dimensions

225 x 220 x 115mm (unit body)

Weight

2.9kg

In The Box

• Portable party speaker unit

• VHF wireless microphone

• Remote control

• UK power supply

• Audio connection cable

• Shoulder strap

• User guide

100.605UK User Manual

Controls and Functions

1. Wired microphone socket (6.35mm jack) 1. Mute button

2. Microphone priority button 2. Track number selection buttons

3. Microphone volume control 3. AUX input selection button

4. Microphone echo effect control 4. Input selection button

5. Bass control 5. USB input selection button

6. Treble control 6. Next track/channel button

7. DC 15V charging socket 7. Equaliser sound effect selection

8. Power on/off button 8. Volume down button

9. Input selection button 9. Recording playback button

10. Record function button 10. Previous track/channel button

11. Recording playback button 11. Record function button

12. Previous track/channel button 12. Volume up button

13. Play/pause/Scan button 13. Repeat function button

14. Next track/channel button

15. Audio input socket (3.5mm jack)

16. USB port

17. TF (micro SD) slot

• Charging/powering the speaker: When charging the speaker, please use only the

recommended power adaptor provided. Charging time can take anything from 4 to 8
hours. The LED panel has a battery status indicator with 4 horizontal segments, which
indicate how much power is left in the battery at any one time. When all 4 segments
are lit, the battery is fully charged. Each segment represents 25% of the charge
capacity, so when there are no segments displayed and the battery symbol begins to
flash you need to recharge the speaker immediately. It’s also possible to use the speaker directly via
mains power, but please note that when the battery is fully charged and you are not using the
speaker, please be sure to disconnect from the mains to prevent damage to the battery from
overcharging.

• Connecting a Bluetooth device: Press the input selection button until “bt” is displayed on the LED

panel to place the speaker in pairing mode. Search for the pairing name “QTX-QX05PA” on your
compatible device and connect. Once pairing is successful, a small asterisk can be seen on the display.
You can now use the track control buttons on either the speaker or remote control to select and play
your music.

• USB or TF (micro SD) plug and playback: Insert the correct media into the matching port on the

unit and the speaker will automatically switch to the correct input mode. The type of media inserted
will then be displayed on the LED panel. You can now use the track control functions on either the
speaker or remote control to select and play your music. For your information, the current track time is
also displayed on the LED panel.

• Using the FM Radio: Press the input selection button to enter the FM mode, then press the

Play/pause/scan button to scan for channels in your location. The speaker will then scan and store