Qtx MINI GALAXY 152.767UK User Manual

MINI GALAXY

RGB Laser with
Internal Battery

Item ref: 152.767UK

User Manual

Thank-you for choosing this Mini Galaxy RGB laser.
This laser takes the popular galaxy model and scaled it down to create this mini RGB version
with an internal battery. This high quality unit creates clusters of laser beams over a large
area, creating an effect similar to one when a light is shone on a mirror ball generating
thousands of laser points. The handy small size allows easy carrying and quick setup and is
further enhanced by the use of fog. Ideal for mobile DJs or small parties.

• Built-in rechargeable battery offers great portability

• RGB laser gives seven colour modes in R, G, B, RG, RB, GB, RGB

• Wide coverage

• Fire fly, firework and star cluster effects

• 8 refraction effects

• 2 different speeds for auto and sound to light mode

• Can be controlled by supplied remote controller

• Supplied with stand and ceiling mount

WARNING This item contains laser radiation, no user serviceable/repairable
parts within. Please refer to licensed electrician to perform any required
repair or maintenance. This product is strictly for professional use only.
Approved personnel required to install and operate the unit, strictly following
the laser health and safety guidelines HSG95.

For detailed information regarding HSG95, please see the below web link:

http://www.hse.gov.uk/pubns/books/hsg95.htm

This product is a class 3R laser but contains class 3B laser when the case is
open. Care needs to be taken when operating the device. Risk of damage is
low but still present. Extreme care needs to be taken if case is to be opened,
as full power 3B laser beams can escape without the casing and lens
protection. Please read this manual thoroughly before use.

152.767UK User Manual

In the box

This mini laser should arrive to you in a single carton. Please ensure the box is undamaged
before accepting the goods. The box should contain:

• Mini Galaxy laser unit

• 12Vdc power supply with UK & EU adaptors

• Bracket and ceiling mount

• User manual

Installation

This product should be securely mounting with adequate fixings to hold the weight. If
mounted at a height use a safety wire attached to the inner bracket and a secondary fixing
point.

Position the laser aperture so that the beam is directed away from people and reflective
objects. When mounted in this manner the unit should be 3m from the ground and 2.5m from
any wall, as cited in HSG95. The below cautions must be observed:

• Power up and run the unit for 10 minutes to check the unit is working properly

• Find appropriate lication for installation. Do not install in a hot, moist or dusty

environment. Ensure there is enough air flow, do not obstruct ventilation.

• Do not expose unit to rain, this init is strictly for indoor use only.

Product layout