QT Solutions 1067 User Manual
BT SERIES
CUSTOMER USER GUIDE
Congratulations on your purchase of the KARR BT system, designed with
convenient, selectable features and a user friendly mobile app to provide
you the best in electronic vehicle security.
Read this manual to become familiar with the product’s functions and
features, ensuring that you are able to use the system to your advantage.
CONTENTS PG
ACTIVE/MANUAL ARMING OF THE BT SYSTEM
DISARMING OF THE BT SYSTEM
BT SYSTEM VIOLATION TRIGGERS
NOISE POLLUTION
STATUS L.E.D. LIGHT INDICATORS
EMERGENCY OVERRIDE
VALET MODE
HOW TO ACCESS THE KARR BT APP
KARR BT APP EXPLAINED
ADDITIONAL MENU OPTIONS
KARR BT SYSTEM FUNCTIONS
2
2-3
3
3
3
4
4
5
7
7
8
BT SYSTEM VIOLATION TRIGGERS
ACTIVE/MANUAL ARMING OF THE
BT SYSTEM
Horn honks once on arming.
Press the lock
button on the
vehicle’s keyless
entry remote.
Doors lock, status L.E.D. light ashes once every
second, immobilizer and triggers will become active
after ve seconds.
If covered entry points are not properly closed, the horn
will honk three times. Check and close the hood, trunk
or doors. Upon doing so, you will hear a conrmation
honk acknowledging it has been properly armed.
Entry points may vary by make and model.
DISARMING OF THE BT SYSTEM
Horn honks twice on disarm.
Press the unlock
button of the
vehicle’s keyless
entry remote.
The immobilizer disengages and the status L.E.D. light
vvturns off.
In the event of a triggered violation, the BT system will
honk four times to alert you of the violation.
If the BT system
is triggered from
any covered entry
point. (Example:
opened door)
If the BT system
is triggered by
the shock sensor.
The horn will sound for a thirty second cycle. Upon
the completion of the cycle, the BT system resets
and after 5 seconds will respond to further triggers.
A slight impact will trigger a fast six-honk warning.
A signicant impact will trigger a full 30-second
BT system cycle.
NOISE POLLUTION
When the
BT system
is triggered
continuously from
the same violation
trigger. (Example:
a door that has
been left open)
To reduce noise pollution, the 30-second BT system
cycle can only be triggered six times before the
BT system isolates the triggered zone and will no
longer respond to further triggers from that zone.
STATUS L.E.D. LIGHT INDICATORS
Blue Rapid Flashing Light – System in process of passive/automatic arming.
Blue Slow Flashing Light – System armed.
Blue L.E.D. Light Off – System disarmed.
L.E.D. Light On (Solid) – System in valet mode.
Orange L.E.D. – System connected via app in any state.
32
EMERGENCY OVERRIDE
OVERRIDE/VALET
BUTTON
While the BT system is
armed, open the door.
The BT system will be triggered and
the horn will sound.
Turn the ignition on and press and
release the override button.
The horn will stop sounding and the
BT system will disarm.
The vehicle may now be started.
Override/valet button is typically
found mounted on the lower half of
the driver’s dashboard.
HOW TO ACCESS THE KARR BT APP
SWDS offers a mobile phone app that allows customers to manage and control
their BT system with the use of a smartphone or tablet. The app will show the
last location of the vehicle after every app connection. When applicable, the app
provides courtesy lock and unlock functions to give you access to your vehicle,
along with BT system setting controls.
Courtesy lock and unlock not available on all makes and models.
The free KARR BT App is available for download
on the Apple App Store and Google Play Store.
ON YOUR IPHONE AND IPAD
VALET MODE
While the BT system is
disarmed and ignition is
on, press and hold the
OVERRIDE/VALET
BUTTON
override/valet button on
the BT system module
for four seconds.
To cancel valet, while the
BT system is disarmed
and ignition is on, press
and hold the
override/valet button on
the BT system module
for four seconds.
Go to the App Store and in the search eld, enter “KARR BT” to nd the app:
The BT system will honk four times
1. Search for “KARR BT.”
and the L.E.D. light will turn on solid.
The BT system will be disabled for
the duration of valet mode.
Override/valet button is typically
found mounted on the lower half of
the driver’s dashboard.
The L.E.D. light will turn off, and the
BT system will honk three times and
cancel valet mode. BT features are
now available.
2. Tap the app called “KARR BT.”
developed by Webhouse Software Solutions.
3. To download the app, tap the “Get” button on the right side of the screen,
then tap “Install.”
4. If prompted, enter your Apple password. You can also use Touch ID or
Face ID for app purchases.
5. After download is complete, login for the rst time using the email you
provided at the time of purchase. For password, use the temporary password
provided via email from karrsecuritysystems@swds.net.
4 5
Loading...