Q-tran QOM-eLED+DMX Installation Instructions Manual

QOM-eLED+DMX

INSTALLATION INSTRUCTIONS

Must be installed by licensed electrician.

● Installation must be in accordance with DMX512-A standard

● DMX Shield must be grounded to Earth Ground at a single point external to power supply

Risk of Fire / Electric Shock

Transformer should be installed by a
Licensed electrician in accordance with
the N.E.C. and all local codes in force.

QOM-eLED+DMX

Wear rubber shoes and work on a sturdy wooden or fiberglass ladder.
This power supply must be installed according to the National Electric
Code and local codes and ordinances.
This power supply is to be installed and serviced only by an licensed electricians.
This power supply is to be installed so that it is not likely to be contacted by people.
To avoid a hazard to children, account for all parts and destroy all packaging materials.

LOW VOLTAGE LIGHTING SYSTEM &

COMPLI ANT

LANDSCAPE LIGHTING SYSTEMS

CLASS: 3425 - 15
3425 - 95

3402 - 15
3402 - 95

20190826-V01© 2019, Q-Tran Inc. 155 Hill St. Milford, CT 06460. All rights reserved - 203-367-8777 - [e-mail] - www.q-tran.com

QOM-eLED+DMX

HOUSING

● 18 gauge Welded Steel Enclosure: 9.22"W x 15.4"H x 4.90"D

● Door: 9.27"W x 14.5"H

● Knockouts: 9

● Built-in support bracket incorporated to secure housing for surface mounting

FEATURES

● Limited output voltage and current, plus isolation for safe operation

● Fully potted driver(s) for moisture resistance

● Controllable with DMX decoder module

● Control 4 LED channels with DMX

● Surface mount only

● Suitable for dry, damp and wet locations

● Suitable for Use with Submersible Luminaire

● Primary Voltage - Universal (120-277V )

● Wide operating temperature range: -4 degF to 122 degF

● Fits up to (3):100W 24 VDC driver(s) and DMX decoder module(s)

● Driver has Class A sound rating

● DMX dimming down to 0%

● Class 2 Output

● 5 year warranty

Low Voltage Lighting Systems

: CSA Class 3425-15 and Class 3425-95
: CSA Standard C22.2 No. 250.0-08 - Luminaires
: ANSI/ UL Standard 2108 - Low Voltage Lighting Systems
: CSA Std C22.2 No 250.13-14 - Light Emitting Diode (LED) Equipment for Lighting Applications
: ANSI/ UL Standard 8750 - Light Emitting Diode (LED) Equipment for Use in Lighting Products

LED Landscape Lighting Systems

: CSA Class 3402-15 and Class 3402-95
: CSA Standard C22.2 No. 250.7-07 - Extra-Low-Voltage Landscape Lighting Systems
: ANSI/ UL Standard 1838 - Low Voltage Landscape Lighting Systems
: CSA Std C22.2 No 250.13-14 - Light Emitting Diode (LED) Equipment for Lighting Applications
: ANSI/ UL Standard 8750 - Light Emitting Diode (LED) Equipment for Use in Lighting Products

DMX in/LedSync out

Use these connectors when the driver is used in a DMX network. For DMX in, connect the network
cable’s DMX+, DMX- and DMX shielding wire (the orange/white, orange and brown wire in a CAT5
cable) to the DMX in+, DMX in- and DMX in shield connector respectively. For LedSync out, connect
the network cable’s DMX+, DMX- and DMX shielding wire to the LedSync out+, LedSync out- and
LedSync shield connector respectively. DMX Shield must be grounded to Earth Ground at a single
point external to power supply

M

-

+

LED DRIVER 2

LED DRIVER 1

(120V - 277V)

(120V - 277V)

BOTTOM TRAY

W B G R+24 W B G R+24

W B G R+24 DMX

9.22"

M

-

+

TOP TRAY

M

-

+

4 Knockouts of 1.36"

1.36"

1.07"

Hole for 1" fitting

ORDERING GUIDE

SizeModel Prim. V Sec. V

1 Size

100W
200W
300W

Max Load

(Watts)

1x100W

2x100W

3x100W

Secondary

Voltage(24VDC)

24VDC
24VDC
24VDC

Max Prim.

Amps @ 120V

0.95 A

1.90 A

2.85 A

2 Primary Voltage

UNV: 120-277 Vrms

3 Secondary Voltage

24VDC

4 DMX

DMX

5 Options

BK

Black Powder Coat SS 316 Marine Grade
Finish ( Standard )

Stainless Steel

Ordering Example

QOM-eLED-100-UNV/24+DMX

LED DRIVER 3

(120V - 277V)

NEU

GND

HOT

PRIMARYSECONDARY

BOTTOM

5 Knockouts of 1.07"

Hole for 3/4" fitting

Opts

DMX

+24 DMXQOM-eLED UNV

Max Prim.

@ 277V

Max Prim.

Amps @ 277V

0.40 A

0.80 A

1.20 A

14.5"

4.90"

15.4"

© 2019, Q-Tran Inc. 155 Hill St. Milford, CT 06460. All rights reserved - 203-367-8777 - [e-mail] - www.q-tran.com

1

QOM - eLED+DMX

15.4"

4.90"

4.90"

Housing & Mounting Options

QOM HOUSING

14.5"

9.22"

ISOMETRIC VIEW

VDC

24

*

Distances are based on a 5% Voltage drop max.

● This product must be installed in accordance with the applicable installation code by a person familiar with
the construction and operation of the product and the hazards involved.

1.07" KNOCKOUT 5X
(FOR 3/4" FITTINGS)

1.36" KNOCKOUT 4X
(FOR 1" FITTINGS)

VOLTAGE D ROP CHART

10 AWG 12 AWG 14 AWG 16 AWG 18 AW G 20 AWG 22 AW G 24 AW G 26 AW G

2

) (3.3mm2) (3.0mm2) (1.3mm2) (0.78mm2) (0.50mm2) (0.33mm2) (0.20mm2) (0.13mm2)

(5.6mm

(W)

17

25

40
80

100

309’
130’

84’

356 ’567’

194’

355’564’897’

141’224’

122’

77’ 48’ 30’ 30’

51’ 32’

82’

53’

20’ 13’ 8’

21’33’

13’ 8’ 5’ 3’

35’56’88’

22’

35’55’88’140’223’

14’

22’

7’

12’

3’

5’

BOTTOM VIEW

MOUNTING OPTIONS

Surface Wall Mount

Pole Mount

1.82"

3.38"

3.14"

0.25"

2.00"

1/4”x2” wood screw or
LAG bolt recommened

NOTE: To order additional lengths of wire for connection in the secondary Please

call Factory for availability.

: QOM must be installed as shown.

© 2019, Q-Tran Inc. 155 Hill St. Milford, CT 06460. All rights reserved - 203-367-8777 - [e-mail] - www.q-tran.com

2

QOM - eLED+DMX

+

iQ-LED

LED DRIVER

To DMX Controller

LINEARdrive 180D

12-28V / 6A Direct voltage controlled LED driver

LINEARdrive 180D

12-28V / 6A Direct voltage controlled LED driver

-

+

iQ-LED

M

-

+

DMX +

DMX -

DMX Shield

DMX

GND

HOT

NEU

LED DRIVER

(120 - 277V)

NEU

GND

HOT

Connecting & Configuration Instruction

Connecting and configuring the LINEARdrive 100D/180D

W B G R +24

LED DRIVER 2
(120 - 277V)

M

-

+

DMX in +

LedSync thru +

LedSync shield

DMX in shield

DMX in -

LedSync thru -

Ext in

-

Ext in +

Primary Wiring

(120 - 277V)

DMX in shield LedSync shield

DMX in - LedSync thyu -

DMX in + LedSync thyu +

GND

GND

NEU

HOT

NEU

HOT

LedSync shield

LedSync thru -

LedSync thru +

DMX in shield

Ext in
Ext in +

DMX in -

DMX in +

-

Blue Wire = Blue LED

Red Wire = Red LED

Green Wire = Green LED

White Wire = White LED

Black Wire = +24V

DMX Shield

DMX -

DMX +

SECONDARY

PRIMARY

iQ-LED

A C

B

NEU

W B G R +24

DMX

HOT

GND

GND

HOT

NEU

Commonly Asked Questions

1) How can I verify my installation?

● Apply AC input, verify display turns on : This confirms AC input wiring

● Run “Visual Test Run” : This verifies wiring of LEDs. Make sure LEDs turning on go in

same order as the Test Run

2) I don’t have a controller yet, how can I keep my lights on?

● Change the Mode to “COLR” : This allows to manually set a specific color to be on

● Adjust the Hue or WHIT to achieve the desired color : This sets that specific color

3) My LEDs aren’t coming out the right color. They look like white has been added in

● Verify the Network Resolution “NETW RES” : Default is 8 BT

● Check your DMX Programming. Stick controllers come with RGB programs by default.
This will cause RGBW LEDs to show Pink vs. Red

Secondary Wiring

TC

LED supply +

Group

1

Group

2

3

Group

4

Group

© 2019, Q-Tran Inc. 155 Hill St. Milford, CT 06460. All rights reserved - 203-367-8777 - [e-mail] - www.q-tran.com

Control Wiring

DMX connections

LedSync shield

iQ-LED

Black Wire = +24V
Red Wire = Red LED
Green Wire = Green LED
Blue Wire = Blue LED
White Wire = White LED

W B G R +24

WARNING: Risk of electrical shock. May result in serious injury or death. Disconnect power before servicing or installing.

CAUTION: The device may only be connected and installed by a qualified electrician. All applicable regulations, legislation and building codes must be observed.

Incorrect installation of the device can cause irreparable damage to the device and the connected LEDs.

● DMX Shield must be grounded to Earth Ground at a single point external to power supply

LedSync thru -

LedSync thru +

DMX in shield

Ext in

Ext in +

DMX in -

-
DMX in +

DMX in shield

DMX in -

DMX in +

DMX

3

QOM - eLED+DMX

Configuration Instruction

Manual configuration

1. Select mode of operation: 2. Set LED groups:

(5 sec)

M

M

+

+

Set mode

MODE

SET

M

display off

-

COLR

SHOW

DMX

+

/

3. Standalone Standalone Networked
operation or operation or operation

- Colour*- - Show - - DMX -

M

HUE

HUE

M

White

WHIT

M

Intensity

INT

M

display off

-

/

0...1535

-

/

0...255

-

/

0...255

+

+

+

M

Show

SHOW

M

Speed

SPD

M

Intensity

INT

M

display off

-

00...20

-

-99...99

-

0...255

M

+

/

DMX address

ADDR

DMX

M

+

/

Network resolution

RES

NETW

M

+

/

Interpolation

INTERPOL

M

display off

-

1...512

-

8 BT

16 BT

-

OFF
VID
COLR
WHIT
GLOW

LED groups

LED

M

External input

EXT INP

M

Dimming curve

DIM CURV

M

display off

+

/

+

/

+

/

1-1L
2-2L
3-3L
4-4L
2-4L
1-4L

OFF
POTM
10V
SWIT

LOG
LIN

-

-

-

/

RGB
RGBW
RGBA
RRGB
RGGB
CCWW
CWWW

/

/

+

+

+

* The colour menu depends on the LED group settings you have selected in step 2.

Other features

Visual test run

M

+ +

Test

TEST

R 1 sec
G 1 sec
B 1 sec

W 1 sec

RGBW 1 sec

R 1 sec
G 1 sec
B 1 sec

W 1 sec

RGBW 1 sec

display off

-

+

Locking the configuration:

M

Lock driver

LOCK

display off

(5 sec)

+

+

-

+

/

NO

M

SOFT
HARD

© 2019, Q-Tran Inc. 155 Hill St. Milford, CT 06460. All rights reserved - 203-367-8777 - [e-mail] - www.q-tran.com

Reset to factory defaults

M

-

+ +

Reset

RE - SET

PRES MENU

Press menu

M

display off

+

(5 sec)

4

QOM-eLED+DMX

M

-

+

iQ-LED

: for exterior

QOM - eLED+DMX

Wiring Installation

LED DRIVER 2
(120 - 277V)

M

-

+

B

LED DRIVER 2
(120 - 277V)

M

-

+

B

B

NEU

GND

HOT

DMX Shield

W B G R +24V

LED DRIVER 2
(120 - 277V)

M

-

+

A C

W B G R +24 W B G R+24

DMX -

DMX +

Blue Wire = Blue LED
Red Wire = Red LED
Green Wire = Green LED
White Wire = White LED
Black Wire = +24V

W B G R +24

DMXW B G R +24

SECONDARY

PRIMARY

GND

iQ-LED iQ-LED iQ-LED

© 2019, Q-Tran Inc. 155 Hill St. Milford, CT 06460. All rights reserved - 203-367-8777 - [e-mail] - www.q-tran.com

HOT

NEU

5

QOM - eLED+DMX

CSA Label

CSA REQUIREMENTS

● Suitable for Indoor and Outdoor use

● This power supply must be installed according to the National Electric Code and local codes and ordinances and in accordance with applicable installation

code by a person familiar with the construction and operation of the product and the hazards involved.

● Wear rubber shoes and work on a sturdy wooden or fiberglass ladder.

● This power supply is to be installed in a location where it is not likely to be contacted by non-electricians.

● To avoid a hazard to children, account for all parts and destroy all packaging materials.

● DMX Shield wire must be grounded to Earth Ground at a single point external to Power Supply

QOM-eLED

Model

QOM-eLED-60
QOM-eLED-120
QOM-eLED-180

QOM-eLED-100
QOM-eLED-200
QOM-eLED-300

● Suitable For Indoor Or Outdoor Use

● Wall Mount Only
INSTALLATION MURALE SEULEMENT

● Suitable For Mounting Within 1.2m (4ft) Of The Ground
PEUT ÊTRE INSTALLÉ À MOINS DE 1.2 M (4 PI) DU SOL

● Suitable For Use With Submersible Luminaires
Or Submersible Pumps

●

Suitable For Wet Locations

CONVIENT AUX EMPLACEMENTS MOUILLÉ

● This Control Unit Has More Than One Power Supply Point
Disconnect All Power Supplies Before Servicing
COUPER L’ALIMENTATION AVEN L”ENTRETIEN

● For Supply Connections Use

● Keep Enclosure Cover Closed

● Read Installation Instructions Before Wiring

● Class 2

Wire Rated For At Least 60C.

Input Voltage

(V)

120
120
120

120
120
120

QOM-eLED

Model

QOM-eLED-60
QOM-eLED-120
QOM-eLED-180

QOM-eLED-100
QOM-eLED-200
QOM-eLED-300

Input Voltage

(V)

120 / 277
120 / 277
120 / 277

120 / 277
120 / 277
120 / 277

INPUT VOLTAGE OUTPUT VOLTAGE

120V

Input Current

(A)

0.60

1.20

1.80

0.95

1.90

2.85

This product must be installed in accordance with the applicable
installation code by a person familiar with the construction and
operation of the product and the hazards involved.

CE PRODUIT DOIT ÊTRE INSTALLÉ SELON LE CODE D'INSTALLATION
PERTINENT, PAR UNE PERSONNE QUI CONNAÎT BIEN LE PRODUIT ET
SON FONCTIONNEMENT AINSI QUE LES RISQUES INHÉRENTS.

WARNING:

RISK OF FIRE. IF INSTALLATION INVOLVES RUNNING WIRE THROUGH
A BUILDING STRUCTURE, SPECIAL WIRING METHODS ARE NEEDED.
CONSULT A QUALIFIED ELECTRICIAN

Frequency

50/60
50/60
50/60

50/60
50/60
50/60

Nominal Output

Voltage (VDC)

12
12
12

24
24
24

24V12V

Nominal Output

Wattage (W)

60
120
180

100
200
300

INPUT VOLTAGE OUTPUT VOLTAGE

120V - 277V

Input Current

(A)

0.60 / 0.29

1.20 / 0.58

1.80 / 0.87

0.95 / 0.40

1.90 / 0.80

2.85 / 1.20

Frequency

50/60
50/60
50/60

50/60
50/60
50/60

Nominal Output

Voltage (VDC)

12
12
12

24
24
24

24V12V

Nominal Output

Wattage (W)

60
120
180

100
200
300

CONTROL TYPE

0-10V

DMX

WD

AW

Q-TRAN, INC.

MILFORD, CT U.S.A.

[phone]

WWW.Q-TRAN.COM

LOW VOLTAGE LIGHTING SYSTEM &
LED LANDSCAPE LIGHTING SYSTEM

CLASS: 3425 - 15 3425 - 95
3402 - 15 3402 - 95

CONTROL TYPE

0-10V

DMX

WD

AW

● Suitable For Indoor Or Outdoor Use

● Wall Mount Only

● Suitable For Mounting Within 1.2m (4ft) Of The Ground

● Suitable For Use With Submersible Luminaires
Or Submersible Pumps

●

Suitable For Wet Locations

● This Control Unit Has More Than One Power Supply Point
Disconnect All Power Supplies Before Servicing

● For Supply Connections Use

● Keep Enclosure Cover Closed

● Read Installation Instructions Before Wiring

● Class 2

Wire Rated For At Least 60C.

This product must be installed in accordance with the applicable
installation code by a person familiar with the construction and
operation of the product and the hazards involved.

WARNING:

RISK OF FIRE. IF INSTALLATION INVOLVES RUNNING WIRE THROUGH
A BUILDING STRUCTURE, SPECIAL WIRING METHODS ARE NEEDED.
CONSULT A QUALIFIED ELECTRICIAN

Q-TRAN, INC.

MILFORD, CT U.S.A.

[phone]

WWW.Q-TRAN.COM

LOW VOLTAGE LIGHTING SYSTEM &
LED LANDSCAPE LIGHTING SYSTEM

CLASS: 3425 - 15 3425 - 95
3402 - 15 3402 - 95

© 2019, Q-Tran Inc. 155 Hill St. Milford, CT 06460. All rights reserved - 203-367-8777 - [e-mail] - www.q-tran.com

6