QT MV6700A, MV6400A, MV6300A Datasheet
PACKAGE DIMENSIONS DESCRIPTION
The QT Optoelectronics family of T-3/4 subminiature LED lamps feature a square-base, transfer
molded package for surface mount applications.
A tinted diffused or water clear epoxy lens —
available in AIGaAs red, high-efficiency red,
green, and yellow — produces wide-angle beam
emission and sharp on/off contrast. The LEDs are
offered with gullwing lead bends for top mounting,
as well as yoke lead bends and Z-bends for
mounting to the back of a PCB.
■ Subminiature T-3/4 transfer molded
■ Low package profile
■ Axial leads
■ Wide viewing angle
■ SMT versions
FEATURES
SUBMINIATURE T-3/4 LED
DIFFUSED and CLEAR LAMPS
HIGH EFF. RED HLMP-6305A Water Clear MV6700A Diffused
YELLOW HLMP-6405A Water Clear MV6300A Diffused
GREEN HLMP-6505A Water Clear MV6400A Diffused
AIGaAs RED HLMP-Q105A Water Clear HLMP-Q150A Diffused
.031 (.78)
.023 (.58)
.058 (1.48)
.050 (1.28)
.276 (7.0) MIN.276 (7.0) MIN
NOTE:
1. ALL DIMENSIONS ARE IN INCHES (mm)
.056 (1.44)
.048 (1.24)
.010 (.26)
.002 (.06)
CATHODE MARK
.075 (1.9)
.063 (1.6)
.087 (2.2)
.079 (2.0)
.024 (.6)
.016 (.4)
.020 (.5)
.012 (.3)
.091 (2.3)
.083 (2.1)
DIA
CATHODE MARK
TYPE SOURCE COLOR LENS COLOR
HLMP-6305A High Efficiency Red Water Clear
HLMP-6405A Yellow Water Clear
HLMP-6505A Green Water Clear
HLMP-Q105A AIGaAs Red Water Clear
MV6700A High Efficiency Red Red Diffused
MV6300A Yellow Yellow Diffused
MV6400A Green Green Diffused
HLMP-Q150A AIGaAs Red Red Diffused
PHYSICAL CHARACTERISTICS
HLMP- TEST
PART NUMBER QTLP- MV6700A MV6300A MV6400A Q150A CONDITIONS
Luminous intensity (mcd) IF = 10 mA
minimum 1.0 1.0 1.0 1.0*
typical 3.0 3.0 3.0 1.8*
Forward voltage (V) IF = 10 mA
minimum 1.5 1.5 1.5
typical 1.8 2.0 2.0 1.6*
maximum 3.0 3.0 3.0 1.8*
Peak wavelength (nm) 635 583 570 660
Spectral line half width (nm) 40 36 28 20 IR =100 mA
Reverse voltage (V) 5 5 5 5
Viewing angle (°) 50 50 28 50
ELECTRO-OPTICAL CHARACTERISTICS (TA = 25° C Unless otherwise specified)
PARAMETER HLMP-6305A HLMP-6405A HLMP-6505A HLMP-Q105A UNITS
MV6700A MV6300A MV6400A HLMP-Q150A
Power dissipation 135 85 135 85 mW
Average forward current 30 20 30 30 mA
Peak forward current
(1mS pulsewidth, 0.1% DF) 90 60 90 300 mA
Lead soldering time at 260° C 3 3 3 3 sec
Operating temperature -55 to 100 -55 to 100 -55 to 100 -20 to 100 °C
Storage temperature -55 to 100 -55 to 100 -55 to 100 -55 to 100 °C
ABSOLUTE MAXIMUM RATING (TA = 25° C Unless otherwise specified)
HLMP- HLMP- HLMP- HLMP- TEST
PART NUMBER QTLP- 6305A 6405A 6505A Q105A CONDITIONS
Luminous intensity (mcd) IF = 10 mA
minimum 3.0 3.0 3.0 20.0*
typical 12.0 12.0 12.0 50.0*
Forward voltage (V) IF = 10 mA
minimum 1.5 1.5 1.5
typical 1.8 2.0 2.0 1.8*
maximum 3.0 3.0 3.0 2.4*
Peak wavelength (nm) 635 583 570 660
Spectral line half width (nm) 40 36 28 20
Reverse voltage (V) 5 5 5 5 IR =100 mA
Viewing angle (°) 25 25 25 25
ELECTRO-OPTICAL CHARACTERISTICS (TA = 25° C Unless otherwise specified)
SUBMINIATURE T-3/4 LED
DIFFUSED and CLEAR LAMPS
*Tested at
IF= 1 mA
*Tested at
IF= 20 mA
Loading...