Slim type remote control with Laser Pointer
RC104/IR507 USER GUIDE
BM-RC104507
Slim type remote control with Laser Pointer RC104/507
1
INDEX
1. Introduction…………………………………………………………………………2
2. Appearance…………………….……………………………………………………2
3. Features…………..…………………………………………………………………3
4. Package contents……………………………………………………………………3
5. System Requirements.....……………………………………………………………3
6. Installation and Operation……..…...…………………………………………….…4
7. Specifications………………….……………………………………………………7
8. Troubleshooting………………..……………………………………………………8
Caution!
No part of manual may be reproduced or modified without our express written permission; otherwise
the right of using the device will be cancelled.
Trademarks
Microsoft®, Windows®, and Windows NT® are U.S. registered trademarks of Microsoft Corporation.
IBM, DOS, and PC are registered trademarks of IBM Corporation. All brands, products and companies
are trademarks of registered trademarks of their respective companies.
Notice
The information contained in this document is subject to change without notice. All rights are reserved.
No part of document may be photocopied, reproduced, or translated to another language, for any
purpose, without our express written permission.
Slim type remote control with Laser Pointer RC104/507
2
Introduction：
Slim type remote control with Laser Pointer is not only a remote control, it also
builds in a red-ray laser pointer function. It provides to enhance user’s experience
and enjoyment during the entertainment mode with PC/NB. It is your total solution
to control various software with your desktop PC or Laptop PC by using this remote
control.
Laser Pointer helps every reporter to catch audience attention and make professionally
presentation.
Slim type remote control can turn any PC or Laptop into an AV center like CD or
DVD player, even a TV set (tuner not include) with wireless controlling of all the
application on your PC. It’s also easy collect in your notebook.
Software hotkey could be program by user. User may open/close 3 software on a
remote control, even can integrate other remote control function in a Slim type remote
control with Laser Pointer.
Bundle with eDio USB receiver to receive the IR (Infrared) signal from the remote
control, and analyzes the signal then transfer it to PC.
Appearance：
Slim Remote Control: RC104 IR Receiver : IR507
Slim type remote control with Laser Pointer RC104/507
3
Features：
1. Innovation design of slim type remote control with Laser Pointer RC104 for
controlling DVD/CD/MP3 software with desktop or laptop PC.
2. Build-in Laser Pointer function for professional present.
3. Bundle with tiny eDio receiver with USB Port, it’s easy to connect with your
computer.
4. O.S.D.(On Screen Display) to show each working function of RC104 on computer
screen while you are using it.
5. Provide default settings for computer software ( PowerCinema3, Windows Media
Player, PowerPoint, Home Theater ) and can be reset-up depends on user demands.
6. 3 software hotkeys convenient to edit personal hot key for different computer
software with easy operation setting program.
7. Offer Value software “Remote Master” including application of Multi Remote
Control Application.
8. Slim type design, easy collect in your notebook.
Package contents： System Requirements：
z Slim Multi Remote Control
(RC104)
z (USB Port) type receiver IR507
z User’s Guide
z Value Software CD-ROM
z Coin Type Lithium battery
CR2032 x 1
z USB extender cable
z Intel® Pentium® 100 MHz PC included in 16M
RAM or above
z Microsoft® Windows® 98SE/Me/2000/XP
z USB Port; PC platform
z CD-ROM drive
Slim type remote control with Laser Pointer RC104/507
4
Installation and operation：
1. Installing battery -- Open the back cover of Remote Control and put in Coin Type
CR2032 Lithium battery.
2. Installing receiver of remote control kit RC104 -- Plugging IR507 receiver (with
USB Port on it) into the USB port of your computer. If the USB port in the back of
desktop or laptop, recommend use USB extender cable to connect with your USB
port of desktop or laptop and IR507 receiver and then put the IR507 receiver in
front of you in order to get the signal from remote Control.
3. Installing CD-ROM
-- Place Value Software CD-ROM into your CD-ROM drive
or DVD-ROM drive and execute Setup.exe file on CD. The installing application
will be start after you double-click it. Please follow the instructions to finalize
installation.
4. Start to use remote control RC104
-- The application of RC104 will execute
automatically every time you power up your computer. Then RC104 is on working
condition; If you close automatic execute file, while you are using RC104, please
press “Start” and “Program Files”, and then click “Remote Control Administrator”
and “Remote Master” to execute application and activate IR507. (You also can set
up short cut on the table screen to activate IR507 easily.)
5. Aim at infrared rays receiver
-- Before you start to use RC104 Remote Control,
please aim at infrared rays RC104 receiver under effective range.
6. How to use current setting software -- If your computer is under RC104 default
settings, there are three default software hotkeys: “DVD-PowerCinema3”,
“MUSIC-Windows Media Player”, “PRESENT-PowerPoint“. You can check
Remote Master AP (figure 1). Click “Default” button is help you to re-cover to
original settings.
Slim type remote control with Laser Pointer RC104/507
5
Figure 1
7. How to change new software --You may also modify computer software default
setting of RC104 Remote Control by double-clicking 「 」--RC104 Remote
Control setting program on taskbar. Please modify RC104 computer software
default setting from hotkey setting menu. For example if select from
PowerCinema3 to Home Theater or other software. (Figure 2).
Figure 2
Slim type remote control with Laser Pointer RC104/507
6
8. How to set up Hot Key –
1) Click the “Advance” setting.
2) If you are under Media Player software, you would like to modify original
hotkey Ctrl+B (Previous function), please click “Pre/Ch- button”. (Figure 3)
3) Then key in the hotkey you want to in the corresponding Hotkey column. For
example: ctrl+shift+B.
4) Then key in the description you like for this hotkey (for example: Rewind for
ctrl+shift+B hotkey ) in OSD (OSD, On Screen Display) display column.
(Figure 4).
5) Then press “Save” button for new HotKey setting
【Figure 3】
【Figure 4】
Slim type remote control with Laser Pointer RC104/507
7
9. How to call a prepared file –
*If you’re a business professional, this step is very useful for your presentation.
1) Click the “Advance” setting, and then change Hotkey Setting to “PowerPoint”.
2) Click the “Browse” button and then select the file that you prepared.
(Figure 5)
3) Then press “Save”&“OK” buttons for new program location setting. (Figure 6)
(The path & file name were an example, for your reference only.)
4) That’s it, next time you press the “PRESENT” key on remote control, then file
in the program location you select will open directly.
【Figure 5】
【Figure 6】
Slim type remote control with Laser Pointer RC104/507
8
Specifications：
z Operation Voltage：3V；Battery：Coin Type Lithium CR2032
z Power Consumption：10mA~150mA
z Infrared Rays Frequency：38KHz；Infrared Rays transmission distance：5~7
meter
z Remote Control size：86 x 53.8 x 4.9 mm
z Remote Control weight：10 g ( Not included in battery)
z Receiver Inter face：USB Port
z Remote Control Button Quantity：23 buttons
Laser Pointer:
z Output power: Under 1mW
z Laser output mode: Continue
z Wavelength at peak emission: 645 ~ 660nm
z Operating temp. range: +10℃ ~ +30℃
!!! Attention !!!
‧
Do not allow minors to use the laser pointer unsupervised. Laser
pointers are not toys.
‧
Avoid direct eye exposure.
‧
Never shine the laser pointer at anyone. The laser pointer is designed
to illustrate inanimate objects.
‧
Do not point the laser pointer at mirror-like surfaces. A reflected beam
can act like a direct beam on the eye.
Slim type remote control with Laser Pointer RC104/507
9
Troubleshooting：
Question Reason Solution
If RC104
Remote
Control
doesn’t
work.
z This is no battery or battery
died or un-correct battery
installation
z Un-correct RC104 Remote
Control installation
z Un-properly connect with
Receiver and computer.
z Check battery and installation
z Uninstall and re-install by
following manual “Installation
and operation third point”.
z Check right connect with
receiver (USB port) and
computer (USB port)
RC104
irregular
reaction
z There is not activate RC104
application
z Computer software wrong
saving route for RC104
installation.
z It doesn’t work after press
buttons due to the computer
software is not working
window.
z Editing HotKey of installation
without closing the software
you wants to use in advanced.
z Activate RC104 Remote
Control application by
following “Installation and
operation forth point”.
z Modify your save route of
software by following
“Installation and operation
seventh point”.
z HotKey setting is working after
activating this software by
RC104 Remote Control.
Notice:
Please activate software by RC104 Remote Control and then you can use all function
of buttons
Status：It’s doesn’t operate software by RC104 Remote Control after Plugging
IR507 receiver (with USB Port on it) into the USB port of your Sound
card or Mainboard and finishing installation.
Solution：Please re-plug IR507 receiver (with USB Port on it) with your computer or
restart your computer.
Loading...