Qstarz BT Q1300S ST, Sports Recorder BT-Q1300ST User Manual

Page 1
Page 2
Page 3
Table of Contents
1. OVERVIEW 1
2. PRODUCT NOTICE 1
3. FEATURES 2
4. PRODUCT SPECIFICATION 3
5. HARDWARE INTRODUCTION 4
6. SETUP BT-Q1300ST 7
7. START TO USE 10
7-5. SWITCH TO EXTREME 10HZ SPORT MODE BY QSTARZGPSVIEW SOFTWARE………..15
8. USEFUL REFERENCE APPLICATIONS ON THE INTERNET 18
9. TROUBLE SHOOTING 24
10. SAFETY NOTICES 28
Page 4
BT-Q1300S Sports Recorder
………………………………………………………………………………………….…………………………………………………………………………….
……….…..……………………………………………………………………………………………………………………......................
1 www.Qstarz.com
1. Overview
Qstarz is dedicated to exceed customer’s expectation and give you
the extraordinary experience beyond navigation ever more. Now, with the BT-Q1300ST Sports Recorder™, which includes dual software: QTravel for travel log and photo geotag; QSports™ for sports activities, you are able to easily schedule your training plan, control your health status, and analyze your sports data.
Register your Qstarz Product:
Register your Qstarz product to get the latest news, software update, event, and product information.
http://www.qstarz.com/reg.php
2. Product Notice
On Handling
If BT-Q1300ST isn’t used in temperature between -10 ~ 60,
its battery charging capability will decrease. Leave the BT-Q1300ST far from heat or high temperature environment. And also, do not expose your BT-Q1300ST in temperature higher than 140/60 to prevent the battery inside
BT-Q1300ST from overheating, exploding or burning itself. The built in battery inside the BT-Q1300ST should be recycled.
Do not leave the unit staying below cars wind shield after car
parked during hot summer season. Some position below wind shield may generate high temperature over 158/70. Such
temperature may melt the unit and damage the battery.
It is recommended to turn BT-Q1300ST off in the hospital.
Wireless GPS receiver may interfere with the medical equipments which use radio frequency.
The manufacturer assumes no responsibility for any damages
and loss resulting from the use of this manual, or from deletion
Page 5
Keep Fit Easy BT-Q1300S Sports Recorder
..............................................................................................................................................................................
………...……………………………………………………………………………………………………………………......................
www.Qstarz.com 2
of data as a result of malfunction, dead battery, or from misuse of the product in any way.
Please clean the unit with a dry and clean soft close. Do not use
harsh cleaning solvents, chemicals, alcohol, or strong detergents.
Do not attempt to open BT-Q1300ST by yourself. Unauthorized
hacking may damage the unit, and void your warranty.
On Battery & Safety
Charging time is about 1 hour typically for this unit. We suggest
disconnecting the unit from the cigarette charger or AC charger after the unit has been fully charged.
When the unit is not in use or not charged, we suggest
disconnecting the unit from the cigarette charger. Otherwise battery drain may result.
Note that the built in battery cannot be charged outside the
temperature range 0 ~ 45℃.
The charging time might be extended if you use the product
while charging
Do not heat or leave the unit in high temperature or direct
sunshine for a long period of time as the built-in battery capacity will deteriorate, or will become unchargeable.
3. Features
Adopt the MTK II chipset with high sensitivity -165dBm and
Super High 66-Channel performance tracking
Record and manage your various exercise/sports Stand-Alone sports recorder to log up to 200,000 waypoints(*) Slim, Thin, Light, and Stylish design, only 62L x 38W x 7H (mm) Support button push manually to memorize your location
immediately
Support Multi-mode setting to record data (Vehicle, Bicycle,
Page 6
BT-Q1300S Sports Recorder
………………………………………………………………………………………….…………………………………………………………………………….
……….…..……………………………………………………………………………………………………………………......................
3 www.Qstarz.com
Jog)
Fast Position Fix, Cold start 35s, Warm start 33s, Hot start 1s Auto On-Off function for smart power control Personal/Portable Navigation (PDA, Smartphone, PC, etc.) DGPS(WAAS+EGNOS+MSAS), QZSS support A-GPS support boosts the fix speed to 15sec faster Built-in Photo Geotag and visualized travel path Smart training plan and track for personal analysis Share your tracks of sports or travel with friends Be your Sports Mate for Health control
4. Product Specification
General
GPS Chip
MTK II GPS Module
Frequency
L1, 1575.42MHz
C/A Code
1.023MHz chip rate
Channels
66-CH Performance
Antenna (Internal)
Built-in patch antenna with LNA
Sensitivity
Tracking -165dBm
Datum
WGS84
Performance Characteristic
Position
Without aid: 3.0m 2D-RMS
Accuracy
<3m CEP(50%) without SA (horizontal) DGPS (WAAS, ENGOS, MSAS): 2.5m
Velocity
Without aid: 0.1m/s, DGPS (WAAS, ENGOS, MSAS): 0.05m/s
Time
50 ns RMS
Cold/Warm/Hot Start
35/33/1 sec, average
Dynamic Condition
Altitude
<18,000m
Velocity
<515m/sec
Acceleration
<4g
Protocol
GPS Output Data
NMEA 0183 (V3.01) -GGA, GSA, GSV, RMC (Default)
Page 7
Keep Fit Easy BT-Q1300S Sports Recorder
..............................................................................................................................................................................
………...……………………………………………………………………………………………………………………......................
www.Qstarz.com 4
VTG, GLL(Optional)
Baud Rate
115,200 bps
Power
Built-in rechargeable Li-ion battery
Bluetooth
Standard
Fully compliant with Bluetooth V1.2
Bluetooth Profile
Serial Port Profiles (SPP), Up to 10 meters
Others
Size / Weight
62 (L) X 38 (W) X 7 (H) mm/ 22g
Operating Temperature
- 10 to + 60
Storage Temperature
- 20 to + 60
Charging
0 ℃ to + 45 ℃
5. Hardware Introduction
5-1. Appearance
1. Power Button (ON/OFF/Enable LOG mode/Disable LOG mode / Push to LOG)
2. Power jack (mini USB type)
3-a Bluetooth status LED (Blue) >BT-Q1300ST with Bluetooth 3-b Bluetooth status LED (OFF) >BT-Q1300ST without Bluetooth
4. Battery status LED
(Red/Green)
5. GPS status LED (Orange)
6. Log status LED (Green)
7. Internal antenna
Page 8
BT-Q1300S Sports Recorder
………………………………………………………………………………………….…………………………………………………………………………….
……….…..……………………………………………………………………………………………………………………......................
5 www.Qstarz.com
5-2. Hardware Function
Hardware Function
Description
Power Jack
Take the power cable and connect it to the power jack (mini USB type) for charging only
Power Button (On)
Press power button and hold for 4 sec to
power BT-Q1300ST on.
Power Button (Off)
Press power button and hold for 4 sec to
power BT-Q1300ST off
Power Button (Enable Log mode)
Log is on when BT-Q1300ST is powered on by
pressing power button and hold for 4 sec. The LOG status LED (green) would blink, and start to log.
Power Button (Disable Log mode)
After power on BT-Q1300ST, press power
button and hold for 2 sec to disable log mode. Then BT-Q1300ST would stop logging with the LOG status LED (green) Off. Press power button and hold for 2 sec to enable log again.
Power Button (Push to Log)
Press power button once to push to log the
favorite Point of Interest.
5-3. Charging Battery
For the first time using the BT-Q1300ST, please charge battery until it is fully charged. Take the power cable and connect it to the power jack (mini USB type) and recharge through USB cable, travel charger, or car cigarette adaptor. This will begin to charge the battery. Charging time is about 1 hours typically.
Page 9
Keep Fit Easy BT-Q1300S Sports Recorder
..............................................................................................................................................................................
………...……………………………………………………………………………………………………………………......................
www.Qstarz.com 6
- When the Power LED is Red, battery power is in low status. Please
recharge.
- When the Power LED is Green, the battery is under charging mode.
- When the Power LED is blinking (Green), the battery is fully
charged.
NOTE: Please recharge the battery on a regular interval if the unit is not used for a long time.
5-5. LED Indicators
LED Status Flash
ON
OFF
Power (Red/Green)
Low Power (Red) Fully charged(Green)
Recharging (Green)
GPS not powered
Bluetooth (Blue)
Flash per 2 sec.: Bluetooth connected and transmitting Mode Flash per 5 sec.: Power saving mode
Not connected /Pairing
GPS not powered / Log Mode is on
GPS (Orange)
GPS position is fixed, Navigation
Detecting Satellite, GPS position not fix
GPS not powered
Log (Green)
Log Mode is on 1Hz Log Mode: Flash per 2 sec(Green) 5Hz Log Mode: Flash per 1 sec(Green) POI(Point of Interest) is recorded: Flash 3 times
Memory is full
GPS not powered / Not connected
Page 10
BT-Q1300S Sports Recorder
………………………………………………………………………………………….…………………………………………………………………………….
……….…..……………………………………………………………………………………………………………………......................
7 www.Qstarz.com
6. Setup BT-Q1300ST
6-1. Install the driver and software for BT-Q1300ST
System Requirement (Only compatible with Microsoft Windows XP
/ Vista/ Win7)
Minimum System Requirement
Recommended System Requirement
- Windows XP or Vista
- Pentium 3, 500Mhz
- 128M RAM
- 128MB disk space
- Network speed: 128Kbits/sec
- 3D-capable video card with 16Mbytes of VRAM
- 800x600, "16-bit High Color" screen
- Windows XP
- Pentium 4 2.4GHz+ or AMD 2400xp+
- 512M RAM
- 2 GB of free disk space
- Network speed: 768 Kbits/sec or better (DSL/Cable)
- 3D-capable video card with 32 MB of VRAM or greater
- 1280x1024, "32-bit True Color" screen
1. Please insert the software CD to your computer, and find the
folder “Utility\Qstarz PC Suite\”. Double click “Qstarz_PC_Suite_installer.exe” to install the software utility
package. This software package contains USB driver,QTravel, and QSports™ inside.
2. System would pop up the utility installation dialog. Please click
<Next> for the next step.
Page 11
Keep Fit Easy BT-Q1300S Sports Recorder
..............................................................................................................................................................................
………...……………………………………………………………………………………………………………………......................
www.Qstarz.com 8
3. Please select “QSports QTravel” “GPS Device Driver”, and then
click <Next> to the next step.
Page 12
BT-Q1300S Sports Recorder
………………………………………………………………………………………….…………………………………………………………………………….
……….…..……………………………………………………………………………………………………………………......................
9 www.Qstarz.com
4. Click <Next> if you want to install the program in default target
folder or you can click <Browse> to change the install folder.
5. Give a folder’s name for quick links in start menu and click
<Install> to install the program.
Page 13
Keep Fit Easy BT-Q1300S Sports Recorder
..............................................................................................................................................................................
………...……………………………………………………………………………………………………………………......................
www.Qstarz.com 10
6. When the utility installation is completed, please click <Finish> to
reboot. Or you can also reboot later by selecting “No, I want to reboot later by myself.”
6-2. Install Google Earth
BT-Q1300ST supports showing your travel path directly on Google Earth. Please go to http://earth.google.com for the free download of Google Earth, and then install it to your computer. For the operation procedure of Google Earth, please refer to
http://earth.google.com/support/
7. Start to use
7-1. Fully charge the battery when using at the first time
A fully charged battery can last up to 10 hours continuously operation (under 1Hz mode), and 4 hours under 5Hz mode.
Note: BT-Q1300ST is for outdoor use, we strongly recommend using
it outdoor under open sky environment for better GPS signal reception.
Page 14
BT-Q1300S Sports Recorder
………………………………………………………………………………………….…………………………………………………………………………….
……….…..……………………………………………………………………………………………………………………......................
11 www.Qstarz.com
7-2. Set BT-Q1300ST to 5hz log
1. Power on BT-Q1300ST
2. Please connect BT-Q1300ST with your PC by mini USB cable.
3. Switch Q1300ST to 5Hz Log mode
Please connect the device with computer and open QTravel/QSports software, in Config GPS select Turn on 5Hz log checkbox to switch to 5Hz log mode.
NOTE: 5Hz Log feature is highly consumed more power and please make sure to recharge Q1300ST each time using this feature.
7-3. Start the software utility
NOTE 1: Before starting the software utility, please make sure that
the USB driver and the software utility has been installed properly.
NOTE 2: QSports and Travel Recorder only supports BT-Q1300ST.
Any intention to use QSports and QTarvel connecting GPS units other than BT-Q1300TST would result in software disconnection automatically.
QSports™ - Your Virtual Sports Coach
QSports is software with database structure
QSports can record, manage, and analyze all your daily/weekly/monthly activities with various sports gear such as Cycling, Skiing,Running, Jogging, Climbing etc.management and analysis.
1. Click from <Start> / <All Programs> / <Qstarz PC Suite> / QSports
Users have to input product key at the first time of use. The product
key is located on the envelop of the software CD.
Page 15
Keep Fit Easy BT-Q1300S Sports Recorder
..............................................................................................................................................................................
………...……………………………………………………………………………………………………………………......................
www.Qstarz.com 12
Important Notice: Do not lose your Product Key. Keep the packaging,
or write the number down and keep it in a safe place.
2. Add New User
QSports™ supports multiple users. User information includes “User Name”, Gender, Birth Date, and Weight. In order to get correct
calories calculation, please fill in the correct personal data.
3. <File> \ < Import Wizard >
Import Wizard can guide you to load the tracks from GPS device easily.
3.1 Select default “Sport Type”. QSports will create tracks with
the default sport type, and users can change the sport type after import.
3.2 PC Utility will automatically detect the COM port and baud
rate and load in the GPS tracks.
NOTE: Make sure to Power on GPS unit first before connecting with
computer for downloading tracks.
4. <Ski track Analysis>
Ski track analysis allows you to compare the data of each ski track by user defined start/finish point, by distance, or by time.
4.1 Add Start/Finish point: click on the green/red fence icon
on the right side of Google Map, and then choose to add a start and finish point of the track.
4.2 Add split points: click the red flag on the right side of
Google Map, and then put the red flag on the place of the track that you want to know more detail about it.
4.3 <Update Lap Info Now!>
Show the ski track analysis info instantly by user defined
Page 16
BT-Q1300S Sports Recorder
………………………………………………………………………………………….…………………………………………………………………………….
……….…..……………………………………………………………………………………………………………………......................
13 www.Qstarz.com
start/finish point, distance, or time.
<By user defined start/finish point> -recommended
Data will be split and shown by user defined start/finish and split points.
<By Distance>
Data will be split and shown by each distance value.
<By Time>
Data will be split and shown by each time value.
4.4 <Comparison>
4.1 Select tracks to compare to the current track. The
comparison is meaningful when the paths are similar.
For detail QSports functionality, please refer to QSports Users Manual attaching with Software.
QTravel:
QTravel is the best Geotagging software to integrating your travel track and photo together easily. Support track editing, playback, and import/export Wizard.
1. Click from <Start> / <All Programs> / <Qstarz PC Suite> / Travel
Recorder Users have to input product key at the first time of use. The product
key is located on the envelop of the software CD.
2. <File> \ < Import Wizard >
Import Wizard can guide you to proceed the Geotag process easily.
2.1 The Import Wizard will jump out every time during
program startup. You can also launch it by clicking <File> \ <Import Wizard> or the quick link icon.
2.2 PC Utility will automatically detect the com port and baud
rate and load in the GPS tracks.
2.3 A track list window will be popped up. Select the tracks to
import.
2.4 Please select the photo folder to import photos for geotag.
You can also skip this step by clicking <Finish> directly and then there will be only tracks shown on Google Map.
NOTE: Make sure to Power on GPS unit first before connecting with
Page 17
Keep Fit Easy BT-Q1300S Sports Recorder
..............................................................................................................................................................................
………...……………………………………………………………………………………………………………………......................
www.Qstarz.com 14
computer for downloading tracks.
3. <File> \ <Export Wizard>
Export Wizard can guide you to proceed export process easily.
3.1 HTML: Pack selected tracks and photos into editable html
files or a single easy sharing mht file.
3.2 Google Earth: KML and KMZ are Google Earth files formats.
KML file contains detail waypoints and tracks info.
KMZ file contains both simple track and photos info.
3.3 Track File: Export tracks and placemarks as GPX, NMEA,
and CSV file formats.
4. <File> \ <Download AGPS Data>
Update the AGPS data from internet assistance server to boost warm start speed to 15sec. A-GPS is a system where outside sources, such as an assistance server and reference network, help a GPS receiver boosts performance beyond that of the same receiver in a stand-alone mode by downloading the almanac data from an assistance server.
Note1: A-GPS can boost GPS warm start speed to always lower than
15sec fix after the first fix. The A-GPS efficiency will decrease when time goes by. If it expires, you would have to download almanac data again because the acceleration efficiency of fix will become totally ineffective.
Note2: Please don’t update the almanac data via Bluetooth
interface.
For detail Travel Recorder functionality, please refer to Travel Recorder Users Manual attaching with Software.
Register your Product Key:
You can register your product key in software -> about -> Input Product Key by an email account. This email with a registered product key will be saved in Qstarz database. You can check your product key by presenting the corresponding email to Qstarz at any time.
Page 18
BT-Q1300S Sports Recorder
………………………………………………………………………………………….…………………………………………………………………………….
……….…..……………………………………………………………………………………………………………………......................
15 www.Qstarz.com
Update the Software:
Please visit Qstarz download page for Multi-language Quick Installation Guide and latest software update.
http://www.qstarz.com/download.php
Please uninstall the old version before installation.
Note: The license of Qstarz PC Suite is different from that of stand-alone installation package of Travel Recorder™. Thus you are unable to update Travel Recorder software only. Please make sure to download the PC Suite installation package for update.
7-4. Change log setting in accordance with your sports activity
The default log setting is logging every 5sec a waypoint which is sufficient for common usage, but for sports activities, you may need higher accuracy of sports data for analysis. We recommend changing the log setting to log every 1sec a waypoint at Travel Recorder™” or “QSports™” -> Config GPS -> GPS Log Setting
7-5. Switch to eXtreme 10Hz sport mode by QstarzGpsView software application
eXtreme 10Hz sport mode allows your GPS to get the same or even
higher positioning and accuracy ability during eXtreme sports.
NOTE1: The default setting for Q1300ST is 1Hz. If you are no longer
to use eXtreme 10Hz sport mode, please switch it back from software.
NOTE2: The update rate stands for the rate of GPS refreshing nmea
data received from satellites. Thus 10Hz update rate only means GPS can receive or refresh nmea data 10 times per second, and it's irrelevant with 10Hz logging.
Page 19
Keep Fit Easy BT-Q1300S Sports Recorder
..............................................................................................................................................................................
………...……………………………………………………………………………………………………………………......................
www.Qstarz.com 16
1. Connect BT-Q1300ST with your PC by mini-USB cable.
2. Switch BT-Q1300ST on.
3. Execute QstarzGpsView.exe (GPSView is in software CD or can be
downloaded from our official website)
4. Select COM port (To find the valid com port, please go to <Device
Manager> and expand the <Ports (COM & LPT)> and check “GPS USB
Serial Interface Driver”) and set the baud rate to 115200.
5. Click On button to establish the communication between
BT-Q1300ST and your PC. If the connection is successful, the NMEA stream will keep showing.
Page 20
BT-Q1300S Sports Recorder
………………………………………………………………………………………….…………………………………………………………………………….
……….…..……………………………………………………………………………………………………………………......................
17 www.Qstarz.com
6. Click Setup tab, and you can change to eXtreme Sport mode under
Fix Update Rate. The higher number means the device can bear
extremer environment. After select an update rate, click Set to save the setting.
7-6. Safety Notice during Sports Activity
Please use Sports Armband to fix the GPS device on your body to prevent it from shaking. Shaking will result in unstable satellite signal reception.
Qstarz Sports Armband(Optional)
Page 21
Keep Fit Easy BT-Q1300S Sports Recorder
..............................................................................................................................................................................
………...……………………………………………………………………………………………………………………......................
www.Qstarz.com 18
The proper usage of Sports Armband and Q1300ST
8. Useful reference Applications on the internet
8-1. locr GPS Photo
BT-Q1300ST is the member of locr GPS Photo certified product. This utility can integrate travel log and digital photos by date/time to show your photos on the map directly. After the integration, the current GPS coordinates also can be imported to your digital photos for the further application. Please find the installation file for Windows XP/Vista or Symbian system in Qstarz GPS CD. Go to
http://www.locr.com for the further information.
Compatibility: Windows XP/Vista, Windows Mobile, Symbian, Mac
Page 22
BT-Q1300S Sports Recorder
………………………………………………………………………………………….…………………………………………………………………………….
……….…..……………………………………………………………………………………………………………………......................
19 www.Qstarz.com
8-2. GPSBabel
This utility can transfer your NMEA file to GPX file or other format. Please go to http://www.gpsbabel.org for free download.
Compatibility: Windows XP/Vista, Mac, Linux.
Page 23
Keep Fit Easy BT-Q1300S Sports Recorder
..............................................................................................................................................................................
………...……………………………………………………………………………………………………………………......................
www.Qstarz.com 20
8-3. CoachR
This web site can share your travel log with your friends. Before sharing your trip, please apply a new account first. Please go to
http://www.coachr.com for the further information.
Page 24
BT-Q1300S Sports Recorder
………………………………………………………………………………………….…………………………………………………………………………….
……….…..……………………………………………………………………………………………………………………......................
21 www.Qstarz.com
8-4. JetPhoto Studio
This utility can integrate travel log and digital photos by date/time to show your photos on the map directly. After the integration, the current GPS coordinates also can be imported to your digital photos for the further application. Please go to
http://www.jetphotosoft.com for free download.
Compatibility: Windows XP/Vista, Mac
Page 25
Keep Fit Easy BT-Q1300S Sports Recorder
..............................................................................................................................................................................
………...……………………………………………………………………………………………………………………......................
www.Qstarz.com 22
8-5. RaceChrono
RaceChrono is a GPS based lap timing software for Nokia S60 smart phones. It can be used to measure lap times on almost any vehicle and track. It can be used to measure laptimes for example for motorbikes, bicycles, cars, water jets and quadbikes. The most important of all, it supports 10Hz update rate. Please find the installation file in Qstarz GPS CD or go to
http://www.racechrono.com for the further information.
Compatibility: Symbian
Page 26
BT-Q1300S Sports Recorder
………………………………………………………………………………………….…………………………………………………………………………….
……….…..……………………………………………………………………………………………………………………......................
23 www.Qstarz.com
8-6. Houdahgeo for Mac system
HoudahGeo is an all-in-one app for geocoding and geotagging your photos, so you can keep track of where they were taken and upload
them to sites like Google Earth and Flickr. Please find the installation
file for Mac in software disc, or go to
http://www.houdah.com/houdahGeo/ for further information.
Page 27
Keep Fit Easy BT-Q1300S Sports Recorder
..............................................................................................................................................................................
………...……………………………………………………………………………………………………………………......................
www.Qstarz.com 24
9. Trouble Shooting
Question
Answer
How can I know if my memory is full?
If you see the Log LED is steady lighted up, which means the memory is full.
My navigation software does not support baud rate 115,200. How can I make it work via USB interface with Qstarz GPS?
When Qstarz GPS is connected via USB interface, the baud rate is fixed and should be set to 115200. If your software does not support this baud rate, please connect the device via Bluetooth interface whose baud rate is changeable.
My Q1300ST crashed. How can I make it back to normal status?
Please leave it until it drains out of battery and then Q1300ST will be back to normal status.
When I use Travel Recorder SW to read log from device, it
appears “No Data in Device.” Why?
Q1300ST will not log invalid GPS data (GPS with no fix). So please make sure to log valid GPS data under open sky environment. If the logger still can not log, please perform a reset in Travel Recorder SW -> Config GPS or QSports -> Config GPS
-> Reset
Page 28
BT-Q1300S Sports Recorder
………………………………………………………………………………………….…………………………………………………………………………….
……….…..……………………………………………………………………………………………………………………......................
25 www.Qstarz.com
Trouble Shooting of Software:
Error
Message
Possible
Reason
Solution
No Data in Device.
Log memory error
Perform a reset in Travel Recorder SW
-> Config GPS.
Not log valid GPS fix data
The program will rule out the GPS not fix data, so make sure to log valid GPS data under open sky environment.
Failed to read data from GPS module!
Invalid operation
1. Unplug and plug in the USB cable.
2. Switch off and on the device
Com port detection error
1. Manually select connection com
port at Config GPS and check connection com port at Windows Device Manager -> Com&LPT -> GPS USB…..or CP210X……
2. Change another USB port for
connection
Page 29
Keep Fit Easy BT-Q1300S Sports Recorder
..............................................................................................................................................................................
………...……………………………………………………………………………………………………………………......................
www.Qstarz.com 26
Driver not installed properly
Reinstall the driver. For Q1000P, Q1200, Q1200Ultra, Q2000: Please remove the USB driver from Control Panel -> Remove Program
-> Silicon Laboratories CP210x USB to
UART Bridge……. And reinstall the
driver. For Q1000X, Q1300, Q1300S,Q1300ST: Please remove the USB driver when the device is connected to PC and find
“GPS USB Serial Interface Driver” at
Device Manager and right click on it and press Uninstall. Then the confirmation dialog will appear and
please select “Also delete device driver software.” And reinstall the driver.
Switch is not turned on or incompati ble GPS device!
not turn on the device
1. Turn on the device.
2. Unplug and plug in the USB cable.
Incompatibl e GPS device
Check the compatibility of your Qstarz GPS module QTravel is compatible with following Qstarz GPS: Q1000P, Q1000X, Q1200, Q1200Ultra, Q1300, Q1300S, Q1300ST,Q2000
Failed to connect GPS Module!
GPS not correctly connected
Follow the standard operation
procedure in user’s manual for making
the connection
Com port detection error
1. Manually select connection com
port at Config GPS and check connection com port at Windows Device Manager -> Com&LPT -> GPS USB…..or CP210X……
2. Change another USB port for
Page 30
BT-Q1300S Sports Recorder
………………………………………………………………………………………….…………………………………………………………………………….
……….…..……………………………………………………………………………………………………………………......................
27 www.Qstarz.com
connection
Driver not installed properly
Reinstall the driver. For Q1000P, Q1200, Q1200Ultra, Q2000: Please remove the USB driver from Control Panel -> Remove Program
-> Silicon Laboratories CP210x USB to
UART Bridge……. And reinstall the
driver. For Q1000X, Q1300, Q1300S, Q1300ST: Please remove the USB driver when the device is connected to PC and find
“GPS USB Serial Interface Driver” at
Device Manager and right click on it and press Uninstall. Then the confirmation dialog will appear and
please select “Also delete device driver software.” And reinstall the driver.
GPS USB connection chip is faulty
1. “CP210x…” or “GPS USB...” does
not appear at Windows Device Manager -> Com&LPT when the device connected with PC.
2. Request a RMA to the store you
bought from.
Failed to write data into GPS Module!
Invalid operation
1. Unplug and plug in the USB cable.
2. Switch off and on the device
3. Try to read log again and don’t
unplug during read log process
*Every time when you feel the device works abnormally, please perform both hard and soft reset to let device back to normal status. **If above method can not solve your problem, the device may be defective. Please request a RMA to the store you bought from.
Page 31
Keep Fit Easy BT-Q1300S Sports Recorder
..............................................................................................................................................................................
………...……………………………………………………………………………………………………………………......................
www.Qstarz.com 28
10. Safety Notices
R&TTE / CE Notice This device is confirmed to comply with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility (89/336/EEC), Low-voltage Directive (73/23/EEC) and the Amendment Directive(93/68/EEC), the procedures given in European Council Directive 99/5/EC and 89/336/EEC.
The equipment was passed. The test was performed according to the following European standards: EN 300 328-2 V.1.2.1 (2001-08) EN 301 489-1 V.1.4.1 (2002-04) / EN 301 489-17 V.1.2.1 (2002-04) EN 50371: 2002 EN 60950: 2000
FCC Notice This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference
received, including interference that may cause undesired operation.
Spec. is subject to change without prior notice. All rights reserved. All registered trademark is belong to their respected companies.
Loading...