How it Works
Qstarz
Loading...
6000s
User Manual
33 pgs1.82 Mb0

Qstarz 6000s User Manual

Download
Page 1
English
…………………………………… ………………………………………………… …………………………………… ………………………………………… ………………. ……………………………. …………………… ………. …………………………… ……
......................................................................................................................................................................................................................................................................................... ..........
0 Racing.Qstarz.com
Page 2
GPS Lap Timer English
…………………………………… ………………………………………………… ………………………… ………………………………… …………………………………. ……………………………… …………………………………… ………………………………
www.Qstarz .com 1
6000S GPS Lap Timer User’s Guide
A. 6000S Package Contents:
1) QSTARZ 6000S unit
2) Device mounting bracket
3) Mini USB cable
4) Car charger
5) Software CD
6) Quick Start Guide
7) Exclusive Sticker + Warranty card
8) 6000S protective case (Optional)
9) Car windscreen mount kit or Motorcycle mount kit (Optional)
(1) (2) (3) (4)
(5) (6) (7) (8) optional
Page 3
English
…………………………………… ………………………………………………… …………………………………… ………………………………………… ………………. ……………………………. …………………… ………. …………………………… ……
......................................................................................................................................................................................................................................................................................... ..........
2 Racing.Qstarz.com
Main functions:
Multi-Function Device – Performance Timer, Lap Timer, Rally and GPS Logger eXtreme 10Hz Log to record 10 times per second 2.4” color display and real-time perform race timing analysis Drag Race by Speed, Distance and Time Circuit Race by Practice, Prediction, Race and Challenge Real time Lap/Spilt/Sector Comparison Auto global track reconization & view circuit thumbnails Auto Start-Run after device senses forward motion History database organized as Calendar and table type for easily review Rally Race with Recce to generate Roadbook Flexible Track Manager – On-Device created to User track, and QRacing Sync to Shared track Visualized GPS logger as a dashboard speedometer G-force meter to plot G-force status Device configurable such as unit, backlight, brightness, time zone, or time format Built in GPS Antenna and also external Antenna plug
Specifications:
Adopt high sensitivity GPS chipset with -165dBm and 66-Channel tracking 2.4” (320x240) TFT Color display with 65K color Ultra lower power consumption up to 10hrs operation (under LCD backlight on) Log rate up to 10Hz excellent for High speed Racing (recording 1 waypoint per 0.1 second) 8 Function buttons – 4 Direction Buttons, Back, Enter, Multi-function, and Power Buttons 3 LED Indicators – Green for Screen Power Saving, Orange for Charging, and Red for Alert Built-in 3-axis accelerometer for G-force measurement and Auto Start trigger Built-in large memory and view history data easily Device recognized as USB removable disk for data access with computer conveniently
Page 4
GPS Lap Timer English
…………………………………… ………………………………………………… ………………………… ………………………………… …………………………………. ……………………………… …………………………………… ………………………………
www.Qstarz .com 3
Raise beeper function to notice some status of device IPX-3 water resistance and Firmware upgradable Less than 15-Sec. AGPS fix support to realize faster TTFF and positioning under warm start Mini-USB interface for charging, data download and firmware update Environment temperature- Operation: -10℃ to +60℃ / Storage: -20℃ to +60℃ / Charging: 0℃ to +45℃ Device Dimension (LxWxH): 100 x 59 x 28mm / Weight: 107 grams (Mounting bracket excluded)
B. Appearance
Name
Icon
Function
1. Power button
Press for 3 seconds to power on or power off 6000S Press to return Main Menu when device is on
2. Enter/Set button
Press to confirm the selected option
3. Left/Right Navigation button
Press to switch among different options and pages
4. Up/Down Navigation button
Press to switch among different options
5. Back/Cancel button
Press to cancel function and go back to previous screen
6. Multi-function button:
Press to start the race and record
Page 5
English
…………………………………… ………………………………………………… …………………………………… ………………………………………… ………………. ……………………………. …………………… ………. …………………………… ……
......................................................................................................................................................................................................................................................................................... ..........
4 Racing.Qstarz.com
7. -Mini USB port
-Reset button
For Charging device For Data download to PC For Firmware Upgrade
8. External GPS Antenna Jack
For connecting optional External GPS Antenna with MCX plug
C. Icon definition
Icon
Description
Icon
Description
Red color
GPS is not fixed, searching for GPS
signals
Battery full
Gray color
GPS is 2D fix
Battery sufficient Green color
GPS is 3D fix
Low battery ( less than 15% battery
time) (Flash with Red color)
16:20
GPS Time
Low battery (less than 5% battery time)
D. LED Signal definition
LED
Red
1. When the memory is full or fail to read/write memory, the Red LED will flash
once per 3 seconds.
2. When the battery is in low status below 15%, Red LED will flash once per 3
seconds. When low below 5%, Red LED will be steady ON to alert.
Page 6
GPS Lap Timer English
…………………………………… ………………………………………………… ………………………… ………………………………… …………………………………. ……………………………… …………………………………… ………………………………
www.Qstarz .com 5
Orange
When device is under charging mode, the Orange LED will be steady ON. After
device battery is fully charged, the Orange LED will be OFF.
Green
When device is under Screen power saving mode (backlight off), Green LED will
flash once per 1 second.
E. Safety Notice
Note: Please read this section carefully before start operating the 6000S.
Keep the 6000S far from heat or high temperature environment. We recommend not to expose your 6000S
in temperature higher than 145℉/60℃ to prevent the device from overheating, exploding or melting itself.
When car interior temperature is too high, is likely to result in product failure or damage. When device is not
in use or driver leaves the car, we suggest disconnecting the device and place in the car glove box.
To reduce the risk of fire or shock hazard, do not expose this product to rain or moisture. Do not mount the devices in a place where the driver or passengers may receive injury during vehicle
operation or collision. For your safety, take care to route all cables away from shifters, pedals, accessory
controls and mechanisms
The manufacturer assumes no responsibility for any damages and loss resulting from the use of this manual,
or from deletion of data as a result of malfunction, dead battery, or from misuse of the product in any way.
Please clean the unit with a dry and clean soft cloth. Do not use harsh cleaning solvents, chemicals, or strong
detergents.
Do not attempt to open 6000S by yourself. Unauthorized hacking may damage the unit, and void your
warranty.
F. Charging 6000S
Please charge the battery fully before the first time use.
6000S comes with a built-in rechargeable Li-Ion battery that can be charged through the PC using the USB cable
provided and car cigarette adaptor. Charging time is 5 hours typically with Power OFF mode and 10 hours with
Power On mode. A fully charged battery will last about 10 hours operation.
Page 7
English
…………………………………… ………………………………………………… …………………………………… ………………………………………… ………………. ……………………………. …………………… ………. …………………………… ……
......................................................................................................................................................................................................................................................................................... ..........
6 Racing.Qstarz.com
Note: To avoid damage to the battery, please do not overcharge the battery for more than 10 hours. The battery
will stop charging if it’s overheated for safety reason.
G. Device bracket mounting
(1) (2) (3)
H. Mounting the 6000S in the vehicle
1. Locate the area on the vehicle windshield where you want to mount the 6000S.
2. Press the suction cup mount against the glass and lower the locking lever into place to secure the mount
to the windshield firmly.
Note: Clean Surface of windshield first by rubbing alcohol or dry cloth before mounting the device.
Secure the mounting bracket in
place with the provided screw.
Line up the bracket with
the screw hole.
6000S mounting bracket
with provided screw.
Page 8
GPS Lap Timer English
…………………………………… ………………………………………………… ………………………… ………………………………… …………………………………. ……………………………… …………………………………… ………………………………
www.Qstarz .com 7
3. Snap the mounting bracket onto the suction cup arm.
4. Please make sure the 6000S is installed as straight and vertical as possible. So the internal 3-axis G-Force
sensor is able to perform more accurately.
How to get better GPS accuracy with 6000S
6000S is for outdoor use, it should be used in open area environments without shelter of tall building or trees to
enable faster satellite lock and provide better positioning accuracy.
X
Page 9
English
…………………………………… ………………………………………………… …………………………………… ………………………………………… ………………. ……………………………. …………………… ………. …………………………… ……
......................................................................................................................................................................................................................................................................................... ..........
8 Racing.Qstarz.com
If you are using the 6000S for the first time or you haven’t been use it for a while, it will need to be left for 10-15
minutes to make the GPS signal accurate and steady.
Install external GPS antenna (Optional Accessory)
6000S has built-in gps antenna, you also can increase the GPS precision and reception quality with external
gps antenna. Open the Rubber cover and plug in the gps antenna connector to antenna jack on the back of
6000S. Make sure to mount the external GPS antenna on the car roof or any metallic surface.
Page 10
GPS Lap Timer English
…………………………………… ………………………………………………… ………………………… ………………………………… …………………………………. ……………………………… …………………………………… ………………………………
www.Qstarz .com 9
About the GPS
The GPS is operated by the government of United States, which is solely responsible for its accuracy and
maintenance. The accuracy of location data can be affected by adjustments to GPS satellites made by
United States government.
Quality of GPS signals may be affected by your location, building, natural obstacles, and weather
conditions. The GPS module should only be used outdoors to allow reception of GPS signals.
The GPS position is for user reference only, you should never rely solely on location data from the GPS
module for positioning.
I. Setup 6000S for First Time
To power on your unit, press and hold the power button for 3 seconds until it turns on, when you turn on the
6000S for the first time, you will be required to set up the following information:
Language (English, Chinese, Japanese) Units of Measurement (Metric or Imperial) Time zone and Time format
After the setup is completed, you will see the Main Menu screen. Select one of 8 operation Modes to execute
required function.
1. Drag Race Mode
2. Circuit Race Mode
3. Rally Mode
4. GPS Logger Mode
5. History Mode
6. Application Mode
7. GPS mode
Page 11
English
…………………………………… ………………………………………………… …………………………………… ………………………………………… ………………. ……………………………. …………………… ………. …………………………… ……
......................................................................................................................................................................................................................................................................................... ..........
10 Racing.Qstarz.com
8. Setting Mode
I-1. Drag Race mode
The Drag race mode is to measure your vehicle’s acceleration and braking’s performance, 3 pre-defined Profiles
(0-100km/h, 400m, 10sec) are stored in 6000S. You can also define your own performance tests or deceleration
criteria by selecting Custom profile.
Select the performance test you want to run, press Next button to enter setup screen; you can set to compare with
last or best lap and the display field info on the screen.
Page 12
GPS Lap Timer English
…………………………………… ………………………………………………… ………………………… ………………………………… …………………………………. ……………………………… …………………………………… ………………………………
www.Qstarz .com 11
Press Start button to start perform your run.
Once the screen show ”Ready” the timer will automatically start when it detects the car starts moving, and stops it
when your car is passing Profile condition (100km/h, 400m or 10sec).
*Do not to run these tests on the public roads!
I-2. Circuit Race mode
The circuit mode is for for measuring lap times and analyzing laps, there are 4 pre-defined and 1 Custom Profiles in Circuit race mode.
Practice profile:
This profile is suitable for track day practice session; it will compare your current lap time with the last lap time by
default.
Prediction profile:
Predictive Lap Timing function is featured to predict the lap time which is about to complete. It can predict you will
be getting faster or slower than the previous best lap. It’s suitable for pursuit breaking your best lap time.
Race profile:
This profile is suitable for race day; it will compare your current lap time with the best lap time by default.
Challenge profile:
Challenge profile allows you to set a lap time as a target to compare and challenge it.
Page 13
English
…………………………………… ………………………………………………… …………………………………… ………………………………………… ………………. ……………………………. …………………… ………. …………………………… ……
......................................................................................................................................................................................................................................................................................... ..........
12 Racing.Qstarz.com
Custom profile:
User can custom your preference by selecting the comparison lap (best or last) and field option display for lap
timing.
- Select one of the profiles you want to test, press Next button. 6000S will automatically detect and display the
nearby start/finish line coordinates of the track based on the track list database within 6000S.
- Select the track you want to test and press Next button.
If you don’t see the track you need, you can download the latest tracks from Qstarz website
( http://racing.qstarz.com/Share.html ) or select the track by the following menu. (see below guide: How to Setup
Start/Finish and Split lines?)
Page 14
GPS Lap Timer English
…………………………………… ………………………………………………… ………………………… ………………………………… …………………………………. ……………………………… …………………………………… ………………………………
www.Qstarz .com 13
Simple Lap: Just press the Start button to race and 6000S will set up the Start/Finish line automatically. Load User Track: Load the track which you created before in this device. Load Shared Track: Load the track which you exported from QRacing software.
Create Closed Track: You can create Start/Finish lines and Splits. Start/Finish line is at the same place. Create Open Track: You can create Start line, Splits and Finish line. Start and Finish line are not at the same
place.
You can load the beacon from User Track you previously created. Or you can load it from Shared Track you exported from QRacing or downloaded from website.
*Load User Track:
*Load Shared Track:
Page 15
English
…………………………………… ………………………………………………… …………………………………… ………………………………………… ………………. ……………………………. …………………… ………. …………………………… ……
......................................................................................................................................................................................................................................................................................... ..........
14 Racing.Qstarz.com
Note1: The vehicle must be moving for better precision when setting the Start/Finish line.
Note2: In some cases it may not be feasible or safe to add Start/Finish Splits line while driving. Users can use
alternative way by QRacing software to edit the Start/Finish and Split lines, then export them to 6000S
for race (Please see K-2 Edit Beacon).
How to setup Start/Finish and Split lines?
1. By driving slowly (at least 30km/h) on the track, press button when you are on the spot that you want to
mark as Start/Finish line.
2. After you have created the Start/Finish line, press button to mark the split line.
(Note: Max 25 split lines can be added for each track)
3. Press button to finish creating the Start/Finish and Split lines. The Track will be saved automatically
in the memory of 6000S\C_BEACON\USER folder once finished; you can re-load it later by Load User Track or
Page 16
GPS Lap Timer English
…………………………………… ………………………………………………… ………………………… ………………………………… …………………………………. ……………………………… …………………………………… ………………………………
www.Qstarz .com 15
share it with other users.
- Beacon Width: Beacon is commonly referred to as the virtual start/finish or split lines. The default beacon
width is set to 50 meters (25m from each side of the vehicle) and the Beacon line is placed in a straight angle to
your current bearing (see below picture), you may adjust the beacon width according to your track width.
- Press Start button
Once the screen show ”Ready” the timer will automatically start when it detects that the car starts moving.
lap time screen for Drag mode 0-100km/h
25m
25m
Page 17
English
…………………………………… ………………………………………………… …………………………………… ………………………………………… ………………. ……………………………. …………………… ………. …………………………… ……
......................................................................................................................................................................................................................................................................................... ..........
16 Racing.Qstarz.com
If you were going faster than comparison lap (best or last), the lap time will be shown in Green background. Or if
you were going slower, and the run time will be shown in Red background. The timing difference between your
current lap and your best or last lap will be shown at the bottom of the screen. You can press the button to
switch the field option on the top right corner of screen or press Up/Down button to change timing display style.
Select lap and Press button to view lap’s detail:
Page 18
GPS Lap Timer English
…………………………………… ………………………………………………… ………………………… ………………………………… …………………………………. ……………………………… …………………………………… ………………………………
www.Qstarz .com 17
Press button to change display screen
Lap Time screen for Circuit Race mode: (tested with Lap with Splits)
For Lap with Splits, if you were passing spilt and going faster than the same spilt of compared lap, the Rolling
time and Split timing difference will be shown in Green background. Or if slower, the Rolling time and Split
timing difference will be shown in Red background. You can also press the button to switch the field option
on the top right corner of timing screen.
Press button to Stop the lap timing and view this Session’s each Lap Time result. Press
Display Mode button to display different data, navigate between these screens by using the
Left/Right buttons.
Page 19
English
…………………………………… ………………………………………………… …………………………………… ………………………………………… ………………. ……………………………. …………………… ………. …………………………… ……
......................................................................................................................................................................................................................................................................................... ..........
18 Racing.Qstarz.com
Sectors: The time from one split point to the next split point. Press the button to navigate and view
each sector’s time.
Splits: The cumulative time from start point to a split Point. Press the button to navigate and view each
split’s time.
Page 20
GPS Lap Timer English
…………………………………… ………………………………………………… ………………………… ………………………………… …………………………………. ……………………………… …………………………………… ………………………………
www.Qstarz .com 19
Split Speed: The speed when across the split line.
Speed & G Value: Display the session lap’s Max/Min/Avg Velocity (Speed) and Max G Value.
You can select the lap and press Enter button to view lap detail. Press the button to swap analysis and track
pages.
Page 21
English
…………………………………… ………………………………………………… …………………………………… ………………………………………… ………………. ……………………………. …………………… ………. …………………………… ……
......................................................................................................................................................................................................................................................................................... ..........
20 Racing.Qstarz.com
I-3. Rally Race Mode
The Recce in Rally Race mode allows user to log their rally course as reference to create their rally stage notes, or
pacenotes.
Press button to start Recce session.
6000S will log the Rally course and display the Trip information on the screen; user can press to set Split (or
checkpoint).
Press ▲ Up Button and hold 1 second to reset Total Distance and Avg Speed Press ▼ Down Button to reset Trip Distance and Avg Speed Press Left Button to toggle GPS Time/Trip Time/Total Time Press Right Button to toggle Speed/Trip Avg Speed/Total Avg Speed
Page 22
GPS Lap Timer English
…………………………………… ………………………………………………… ………………………… ………………………………… …………………………………. ……………………………… …………………………………… ………………………………
www.Qstarz .com 21
I-4 GPS logger mode
You can also use 6000S as a GPS Data logger to record your travel route.
Session name: The system will automatically create the Log name with YYMMDDXX format. Time: Select the log frequency (1Hz, 5Hz, 10Hz or user define 0~99 seconds) Distance: Select to log by distance (0~9999 meters). Speed: Select to log by speed (0~999 kph). Speed Alarm: When you exceed the set speed, 6000S will alert with beep sound. Press button to start logging.
I-5. History Mode
You can review all the data recorded with 6000S in History mode. When the calendar day shows up in Red, it
means there’s racing record.
Page 23
English
…………………………………… ………………………………………………… …………………………………… ………………………………………… ………………. ……………………………. …………………… ………. …………………………… ……
......................................................................................................................................................................................................................................................................................... ..........
22 Racing.Qstarz.com
Press =Menu Button can view the selected Session Detail, Property, Delete session or Export track.
Track export file format can be selected with KML, CSV or GPX file. After track export succeeded, the
exported file can be found on the device memory of the 6000S\Exports folder.
I-6. Application Mode
In Application mode, you will be able to perform 6000S as G-meter or Demo display.
G-meter:
G-Meter uses 6000S's built in 3-axial accelerometers to provide accurate real-time G-force results with graphics.
Page 24
GPS Lap Timer English
…………………………………… ………………………………………………… ………………………… ………………………………… …………………………………. ……………………………… …………………………………… ………………………………
www.Qstarz .com 23
I-7. GPS Mode
In GPS mode, user can check gps satellite status or perform gps cold start.
GPS Status:
6000S will show a screen, which shows which satellites are in use. The bar graphs show the strength of the
satellites that the GPS has acquired. Press the button to see GPS info.
GPS Cold Start:
Performing the Cold Start function will clear the GPS engine of the device’s list of old satellite information. Under
normal operating conditions, the last satellite lock computed before the unit was turned off is stored into
memory and will be used as the reference when the next time the unit is turned on. Also, if you travel for more
than 500 miles with it turned off, it will still have the reference point but it may be too inaccurate to be useful
and result in longer time to get a satellite lock. In this case you may want to perform a cold start.
IMPORTANT NOTICE: For stable positioning and data accuracy, please DO NOT interrupts cold start. And start
Page 25
English
…………………………………… ………………………………………………… …………………………………… ………………………………………… ………………. ……………………………. …………………… ………. …………………………… ……
......................................................................................................................................................................................................................................................................................... ..........
24 Racing.Qstarz.com
to use after cold start is completed.
I-8. Setting mode
In the Setting mode, option such as Unit of Measure (mph/kph), Backlight, Brightness, Time Zone, Time
format, Daylight Saving and Language options can be adjusted, or reset device to factory default.
Language: Select the desired language and press Enter Button, and wait until the language loading is
completed. Please make sure the battery power is sufficient up to 80%, and do not turn off or press the reset
button while loading the language.
Start Up Menu: Select the start up page (Main/Drag Race/Circuit Race) once device is switching on. Memory Status: You can know the percentage of Used Memory. Select button and is able to clear all
memory. But make sure you have saved log data in advance.
G-Sensor Threshold: When start trigger by G-sensor is too sensitive, you may increase the G-Sensor threshold
to make the trigger less sensitive. Default G-sensor threshold is 0.1G.
J. Upgrading Firmware
Qstarz will frequently update the firmware to provide new features and bugs fix; it is advisable to visit Qstarz
website (http://www.qstarz.com/download.php) regularly for firmware updates.
Please check the unit’s current version at Setting Mode >> About. If the current version is older than the one
published in our website, please download the latest version and follow the steps below to upgrade
Page 26
GPS Lap Timer English
…………………………………… ………………………………………………… ………………………… ………………………………… …………………………………. ……………………………… …………………………………… ………………………………
www.Qstarz .com 25
firmware:
Step1. Turn OFF the device and connect to the USB port of computer. 6000S will enter into USB ACCESS
MODE automatically.
Step2. Extract the downloaded firmware file Q6000S.qst and copy to the root directory of the device memory.
Step3. Unplug the USB cable and press both “ENTER” and “POWER” buttons at the same time until the
“CHECK FILE” screen prompts. And it will start updating the firmware. Once the firmware updating
process is complete, device will restart automatically.
Caution 1: Please make sure your battery power is sufficient up to 80% before updating your firmware.
Caution 2: Do not press the reset button while updating the firmware.
K. Data Download and Data Analysis
6000S comes with QRacingTM software inside the package.
-QRacing™ lap timing analysis software allows you to download and analyze the data stored in 6000S.
You can manage your racing tracks as database structure and analyze with graph statistics.
K-1. Import data from 6000S
Install QRacing software from Qstarz software CD. Input product key at first time use. (The product key is
located in the envelope of the software CD)
"Power off" the unit and connect the supplied USB cable to the computer. Run QRacing software Click on “Read Log” from Menu >> File Select the Racing Type
Page 27
English
…………………………………… ………………………………………………… …………………………………… ………………………………………… ………………. ……………………………. …………………… ………. …………………………… ……
......................................................................................................................................................................................................................................................................................... ..........
26 Racing.Qstarz.com
Select the session to import
If you haven’t loaded the beacon previously, QRacing will ask you to edit beacon. Click “Yes” and will load
the beacon from 6000S, or you may click “Cancel” to edit the beacon by you.
Note: Once loading beacon from 6000S, QRacing will remember this beacon set and use it for all other
sessions with the same track. If you want to load another different set of beacon, please “Delete All
Beacon” in Beacon page and select the session to load the beacon again from 6000S.
K-2. Edit Beacon
Please go to QRacing Beacon page and edit the Start/Finish and Splits line for your track.
Once finished, you may also export it into 6000S device by clicking on Beacon Export >> Export Beacon to
6000S. You can then load the exported track in 6000S Ciruit Race mode >> Track Name >> Load Shared Track
later on for race.
Page 28
GPS Lap Timer English
…………………………………… ………………………………………………… ………………………… ………………………………… …………………………………. ……………………………… …………………………………… ………………………………
www.Qstarz .com 27
K-3. Analyze Data
Once beacon is loaded or edited, you may start to analyze and view your racing data. Switch to Analysis page
to view and analyze your lap time and the best result will be highlighted in blue.
Sector View
Sector = the time from one split point to next split point.
Page 29
English
…………………………………… ………………………………………………… …………………………………… ………………………………………… ………………. ……………………………. …………………… ………. …………………………… ……
......................................................................................................................................................................................................................................................................................... ..........
28 Racing.Qstarz.com
Spilt View (Cumulative)
Split = the cumulative time from start point to a split Point
Point Current Speed View
K-4. Track-Map view
In Track page, you can select three laps for showing and compare the data. You can also compare the laps by
line graph with Distance-base or Time-base.
Page 30
GPS Lap Timer English
…………………………………… ………………………………………………… ………………………… ………………………………… …………………………………. ……………………………… …………………………………… ………………………………
www.Qstarz .com 29
QRacing will display the vehicle’s braking zone with a thick line and acceleration zone with a thinner line;
which can be beneficial for driver to improve their lap times. Click the play button on the status bar. It can
replay the selected 3 laps and display the racing information by time and speed simultaneously.
K-5. Preference Setting
In the Menu > Tool > Preference or click on the Preference button on Track page will allow user to select their
preference setting when playing the track.
Page 31
English
…………………………………… ………………………………………………… …………………………………… ………………………………………… ………………. ……………………………. …………………… ………. …………………………… ……
......................................................................................................................................................................................................................................................................................... ..........
30 Racing.Qstarz.com
K-6. Video
QRacing can sync the racing video with the track. In Video page; click on the button “Set video for track...” the
video setting dialog will pop out. You can add, remove and edit the videos.
K-7. Compare with other users
Click on “Comparison”, you can choose tracks belong to the same racing type (Circuit, Drag or Rally racing)
and compare with other user’s track.
*For detailed instructions, please refer to QRacing’s user manual attached with the software.
*Or visit our online tutorial video at: http://racing.qstarz.com/Products/Qracing/Q-VideoTutorial.html
L. Register your product
Register your Qstarz product to get the latest news, software update, event, and product information.
Page 32
GPS Lap Timer English
…………………………………… ………………………………………………… ………………………… ………………………………… …………………………………. ……………………………… …………………………………… ………………………………
www.Qstarz .com 31
http://www.qstarz.com/reg.php
M. Update the Software:
Please always go to Qstarz download page to check if there is any latest software update.
http://racing.qstarz.com/
N. Frequently asked Questions
1. Why is my unit not receiving a satellite signal?
- Although the 6000S will normally pick up a satellite signal within 1-2 minutes after powering on the device, it
may take longer time if you are in an area with more geographic obstructions.
Please make sure you have placed it in a position that has clear view to the sky and not obstructed by metal
objects.
2. My 6000S crashed. How can I make get it back to normal status?
-You can find the Reset button beside USB connector, a small hole which can be pressed by pen tip or pin to
reset your device. (Hard reset will shut down the device without erasing the memory data.)
3. I have set up my Start/Finish line, but it does not show any lap times?
-Please make sure the unit is mounted vertically straight as possible to your car’s windshield and you have
driven a complete lap around passed the Start/Finish line.
4. How long is the battery life of 6000S?
Depending on how you are using the unit, your average battery life will be 8 ~10 hours. Using the device in a
poor environment, having the backlight always on will decrease battery life.
5. Once I skip the tip how to enable it again?
Go to Setting >> Tip, set Tip to OFF and then set Tip to ON again
Page 33
English
…………………………………… ………………………………………………… …………………………………… ………………………………………… ………………. ……………………………… …………………………………… …………………………… .
......................................................................................................................................................................................................................................................................................... ..........
32 Racing.Qstarz.com
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use