Qrio 000001 User Manual

Q-SL1 [U] 4-QSU-591-02

Reference Guide

Qrio Smart Lock Q-SL1

Getting Started

Access our website and download

the application.

https://qrio.me/r/sl-info

Refer to the Start Guide for details of the
operations.

©2016 Qrio, Inc.
Printed in Japan

To Use Smart Lock Correctly

• Read these instructions.

• Keep these instructions.

• Heed all warnings.

• Follow all instructions.

• Smart Lock is a delicate device. Do not apply strong
force or allow it to fall.

• Smart Lock is designed to control locks and not to
prevent theft. We cannot assume responsibility if an
accident occurs or damage is done after Smart Lock is
installed.

• In the case that Smart Lock does not work, make sure
to take your key with you when leaving your home.

• After locking/unlocking using your smartphone/tablet,
physically confirm that the door is actually locked/
unlocked.

• Use Smart Lock indoors to avoid direct sunlight, rain or
wind.

• Inappropriate installation of Smart Lock may cause it to
fall off or fail to perform the lock/unlock operation.

• Hanging objects or applying strong force may cause
Smart Lock to come off or fall resulting in damage.

• When you operate Smart Lock using your smartphone/
tablet, do not touch the door or thumbturn until the
locking/unlocking operation is completed.

• When the battery is weak, the operating range will be
shorter and you may not be able to lock/unlock using
your smartphone/tablet.

• When the indicator or the application informs you that
the batteries are drained, replace the batteries. (It is
recommended that you use Smart Lock always with
four batteries.)

• Regularly check that Smart Lock is firmly installed.

• Use the supplied or specified double sided tape by Qrio,
Inc.

• When you remove Smart Lock, the door surface may be
damaged by the double sided tape used to fix Smart
Lock to the door.

About Using a Smartphone/Tablet to
Control Smart Lock

• Set the screen lock on, in case you lose your
smartphone/tablet.

• If you accidentally lose your smartphone/tablet, remove
Smart Lock from the door or all the batteries from
Smart Lock to invalidate Smart Lock operaton.
When you use Smart Lock again, read the Start Guide.

Owner’s Record

This model number and the serial number are located on
the side of battery holder (SIDE B). To see these, you need
to remove the lock’s cover.
Record these numbers in the space provided below. Refer
to these numbers whenever you contact Qrio customer
support regarding the product.

Model No.

Serial No.

• Qrio is a trademark of Sony Corporation.

• The Bluetooth

®

word mark and logos are owned by the
Bluetooth SIG, Inc. and any use of such marks by Qrio,
Inc. is under license.

• Other trademarks and trade names are those of their
respective owners. ™ or ® marks are not specified in the
document.

WARNING

Do not insert any water or objects

To reduce the risk of fire or electric shock, do not expose
Smart Lock to rain or moisture.
Exposing to water or inserting may cause electric shock. If
you accidentally expose this apparatus to water or
accidentally insert an object, remove the batteries
immediately and consult the dealer or Qrio customer
support.

Keep Smart Lock out of the reach of small
children

There is a possibility that small parts may be swallowed.
Keep Smart Lock out of reach from small children.
Swallowing the small parts may cause suffocation or
stomach injury. If a part is swallowed, consult a doctor
immediately.

Do not leave Smart Lock in a location
near heat sources or in a place subject to
direct sunlight, excessive dust, moisture,
oil mist, or steam

Doing so may cause fire or electric shock. Do not use
Smart Lock in a place subject to excessive moisture, such
as bathroom, basement or conservatory.

Do not disassemble

Doing so may cause a malfunction or electric shock.
Consult Qrio customer support for inspection or repair of
Smart Lock.

Do not handle with wet hands

Doing so may cause electric shock.

CAUTION

This product complies with standards established by the
following regulatory bodies

• Federal Communications Commission (FCC)

FCC

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.

NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and

receiver.

– Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

– Consult the dealer or an experienced radio/TV

technician for help.

This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment and
meets the FCC radio frequency (RF) Exposure Guidelines.
This equipment has very low levels of RF energy that is
deemed to comply without maximum permissive exposure
evaluation (MPE). But it is desirable that it should be
installed and operated keeping the radiator at least 20cm
or more away from person’s body.

This equipment must not be co-located or operated in
conjunction with any other antenna or transmitter.

You are cautioned that any changes or modifications not
expressly approved in this reference guide could void your
authority to operate this equipment.

Q-SL1 [U] 4-QSU-591-02

Note on Use

• Only use attachments/accessories specified by Qrio, Inc.

• There are limitations on the use of certain types of radio
signals depending on the country or region. In some
cases, use of Smart Lock outside the United States may
lead to a fine or other penalty.

• Do not use any types of neutral detergent, benzene,
alcohol, or any chemical product as they may cause a
deformation or change the color of Smart Lock.

About Bluetooth® connection

• Bluetooth connection sensitivity may be affected in
situations below.

– There is an obstacle such as a person, metal, or wall

between the devices and system that are

communicating.
– A microwave oven is in use near the system.
– A device that generates electromagnetic radiation is

in use near the system.

• Do not use the device with the wireless communication
function in locations where it is prohibited to use
wireless communications or near electric devices*. It
may cause an accident or a malfunction of electronic
devices affected by the radio wave.

* A fire alarm or automatic doors.

• This system supports security capabilities that comply
with the Bluetooth standard to provide a secure
connection when the Bluetooth wireless technology is
used, but security may not be enough depending on
the setting. Be careful when communicating using
Bluetooth wireless technology.

• We do not take any responsibility for the leakage of
information during Bluetooth communication.

• Smart Lock is not guaranteed to connect with all
Bluetooth devices.

– A device featuring the Bluetooth function is required

to conform to the Bluetooth standard specified by
Bluetooth SIG, and be authenticated.

– Even if the connected device conforms to the above

mentioned Bluetooth standard, some devices may not
be connected or work correctly, depending on the
features or specifications of the device.

• Depending on the device that is connected to Smart
Lock, it may take some time to make a connection.

About the lithium battery

WARNING

When leakage of the lithium battery occurs.

• Do not touch with bare hands.

• The liquid may remain inside Smart Lock. Consult Qrio
customer support when leakage has occurred.

• Getting the liquid into your eyes may cause loss of
eyesight. If this occurs, do not rub your eye. Wash
thoroughly with clean water and consult a doctor
immediately.

• Getting the liquid onto your body or clothes may result
in burns or injury. If this occurs, wash with clean water
immediately. If you have symptoms of inflammation or
injury on your skin, consult a doctor.

About the lithium battery

• Place the battery with the + and - ends in the correct
direction.

• Do not use leaking lithium battery.

• Replace battery with the same or equivalent type only.
Use of another battery may present a risk of fire or
explosion.

• Batteries should all be replaced at the same time using
fresh cells only.

• Use the same batteries in pairs.

• Dispose of used battery promptly, according to local
environmental laws and guidelines in force.

• Keep away from children.

• Do not disassemble and do not dispose of in fire.

CAUTION

• The battery used in Smart Lock may present a fire or
chemical burn hazard if mistreated. Do not recharge,
disassemble, heat above 100 °C (212 °F) or dispose of
in fire.

• Do not let Smart Lock get wet. Do not use Smart Lock
in a place where it may be subject to moisture, such as
a bathroom.

• Do not remove or damage the vinyl tube.

Specifications

Power supply

DC 6.0 V, CR123A lithium battery

Communication system

Bluetooth Standard version 4.0 (Bluetooth low energy technology)

Output

Bluetooth Standard Power Class 2

Maximum communication range

Line of sight approx.10 m (30 ft)*

* The actual range will vary depending on factors such as

obstacles between devices, magnetic fields around a microwave
oven, static electricity, reception sensitivity, antenna’s
performance, operating system, software application, etc.

Radio frequency

2.4 GHz band (2.4000 GHz – 2.4835 GHz)

Dimensions

Approx. 57 mm × 84.5 mm × 115.5 mm (2.24 in × 3.33 in ×

4.55 in) (w/h/d)

Mass (Only the main unit*)

Approx. 349 g (12.31 oz) (Without CR123A lithium battery)
Approx. 383 g (13.51 oz) (With 2 of CR123A lithium battery)

* The Smart Lock main unit, thumbturn cover, thumbturn holder

(size S) (initial mount.)

Consultant of usage and repair

https://qrio.me/support

This document offers repairs at no charge. If any problems occur during
the warranty period (as set forth below), enter the customer name and
contact us for repairs.

Warranty

Product Name: Qrio Smart Lock
Model name: Q-SL1
Date of Purchase: Year Month Date
Vendor:
Contact Details: Qrio Customer Support
Website: https://qrio.me/support
Warranty Period: One year from the day of purchase*
* Even after free repairs (including product replacement) based on this

document, the applicable warranty perid will be from the original
purchase date of the product.

Customer Address

Phone Number

Name

Free Repair Requirements

1. If problems arise with the product during the warranty period based
on normal use, repairs at no charge will be provided in accordance
with this document. In such cases, please request repairs in accordance
with this document.
Please note, based on the problem conditions and other such
conditions, there are cases when the product will be replaced as a
substitute for repairs.
Also, recycled parts and replacement parts may be used for repairs.
Replaced parts used in repairs will be voluntarily given by our company
and will be disposed and dealt with properly.
For repair requests or advice on products, please contact the support
services described in this document. Please note, this document
cannot be replaced so please store in a safe location.

2. Exceptions
In any of the following situations, repairs will be on a charge basis.
(1) When this document is not presented
(2) If the date of purchase and name of the vendor is not entered into

this document or the document has been changed

(3) If the damages occurred within the warranty period, but the

request for repairs is after the warranty period

(4) Problems or damage based on incorrect usage (e.g., when not

used in accordance with this document or a use that is disclaimed
in the application, or when used for purposes for which the
Product is not designed or intended)

(5) Damage caused by other devices or improper repairs, or problems

or damage based on modifications

(6) Problems or damage based on improper installation or handling

after purchase (including improper storage, installation,
maintenance or operation, and other environmental conditions)

(7) Damage or injury due to fires, earthquakes, wind and flood

damage, thunder and lightning, and other related extraordinary
natural occurrences, environmental pollution, salt damage, gas
damage (sulfide gas, etc.),and abnormal voltage

(8) Damage or injury due to uses outside of business or general home

usage

(9) Failures, defects, or damage (including, but not limited to, any

security failure or loss of data) caused by any third party product,
service, or system connected or used in conjunction with the
Product

(10) Normal exchange of consumable parts (like batteries), or

exchange of soiled parts

3. The Company shall not be liable for any of the following damages:
(1) Damages based on not being able to use the product due to

damage to the Product

(2) Lost data in a product that installs or uses recording media due to

repair, exchange or failure of such product

4. LIMITATIONS ON DAMAGES: COMPANY SHALL NOT BE LIABLE FOR
ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF
ANY EXPRESS OR IMPLIED WARRANTY OR CONDITION ON THIS
PRODUCT. NOR SHALL RECOVERY OF ANY KIND AGAINST COMPANY
BE GREATER THAN THE PURCHASE OF THE PRODUCT,
DURATION OF IMPLIED WARRANTIES OR CONDITIONS: EXCEPT TO
THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE
DURATION OF THIS LIMITED WARRANTY.

5. This warranty gives you specific legal rights, and you may also have
other rights as otherwise permitted by law.
Some jurisdictions do not allow the exclusion or limitation of incidental
or consequential damages or allow limitations on how long an implied
warranty lasts, so the above limitations or exclusions may not apply to
You.

6. This warranty is valid only in the United States. (This warranty is valid
only in the United States.)

Accept repairs