Qpets SP 606 User Manual

LAVA Electronics Inc. Tel: [phone], Email: [e-mail] www.lavasat.com

No Bark Static Shock Training Collar

User Manual Model: SP 606

Contents:

• 1 x No Bark Collar Device

• 1 x 4LR44 6V Battery

• 1 x Test Light

• 1 x User Manual

Quick start Guide

Step 1: Prepare the Device

Follow the Positive (+) and Negative (-) signs inside of device and put the 4LR44 6V

battery into device. The LED indicated will not light up when you put the battery

inside of the device.

or start shocks.

The LED indicated light only lights up when the device is beep

Step 2: Test the Device

1. Put the Test Light

2. Press High Button of adjustment of sensor on the device to the highest, and

blow some air into the Sensor. (There are 6 levels of sensor can be adjusted)

3. The device will beep and the LED indicated light will light up for the first two

times. (beep increase)

4. The third time, the device will beep and start static shock after beep. The

Test Light will be blinking or lights up after the beep. (If there is no static

shock the Test Light will not light up or blinking).

on the Electrodes of device. (Both side touch the METAL)

1

LAVA Electronics Inc. Copyright 2009-2010, All Rights Reserved