Qpets SP 208, SP 209 User Manual

Please read this guide before using

Thanks you for choosing Qpets. Our mission is to make you a happy pet owner by

providing quality pet products, including the latest tools and technique to successfully

train your pet. If you have any question or comments, please contact out Customer

Support Center at 1-909-923-8743 or visit our website at www.lavasat.com

This is an effective pets training system for small & medium pet which weight under 50

pounds. It can train up to 2 pets at the same time. The Training System has 100 levels

static shock, 100 levels vibration, beep and light function with LCD display. The range is

up to 300 feet.

SP 208 only has one receiver for training 1 pet

SP 209 has two receivers for training 2 pets

Table of Contents

Components…………………………………………………………………2
Function of Transmitter & Receiver……………………………….2
Quick Start Guide…………………………………………………………..3

Step-1 Prepare the remote/transmitter…………………….3

Step-2 Pair transmitter with the collar receiver…………3

Step-3 Install the electrodes for the receiver…………….4
Step-4 Adjust the collar to fit your pet………………………4

How to check the static shock function…………………………5
How to change the battery…………………………………………….5
Important Tips……………………………………………………………….5
Customer Support Center……………………………………………6

1

Components:

1 x Transmitter

(Controller)

1 x Receiver(SP 208

has 1 Receiver

SP 209 has 2

Receivers)

1 x Adjustable

Collar Strap (for

each Receiver)

2 x Pairs of

Electrodes (for each

Receiver)

2 x 6V 4LR44

Batteries (for

Transmitter)

1 x Test Light (for

testing static shock

function)

2 x 1.5V AAA

Batteries (for

each Receiver)

1 x User Manual

Function of Transmitter and Receiver

1. Mode Button (9) for changing different functions (There are 4 functions which

are Static Shock, Vibration, Beep, and Light).

2. “1/2” Button (7) for switch channels. (SP 208 needs to make sure which

Channel
you pair the receiver with, we recommend you to pair receiver with Channel 1)

3. Light Button (6) for the LED Light (2) which on the Transmitter.

4. Y (8) Button is a Launch button for the receiver and also a WORKING BUTTON.

5. Up/Down (5) Button is on the side of transmitter for adjusting the shock and

vibration levels (from 1 to 100).

6. The Transmitter and Receiver will enter Sleep Mode automatically if there is no

activity detected within 2 minutes.

7. There is no display on the LCD Screen when the Transmitter enter Sleep Mode,

please press the Mode Button (9) and Hold for 5 seconds and the Transmitter
will get back to Work Mode.

8. The Green indication light will turn off automatically when receiver enter Sleep

Mode, please gently shake receiver, the receiver will get back to Work Mode.

2