Qpets AF 100 User Manual

Large Capacity Automatic
Pet Feeder
Please read this guide before programming the feeder
Thank you for choosing Qpets. Our mission is to make you a happy pet owner by providing quality pet products, including the latest tools and technique to successfully train your pets. If you have any questions or comments, please contact our Customer Support Center at 1-909-923-8743 or visit our website at www.lavasat.com.
Table of Contents
Components…………………………………………………………………………………………2 QUICK START GUIDE………………………………………………………………………………2
Function of control panel keys….…………………………………………….….2 Getting started……………………………………………………………………………...3 Step 1-set the current time……………………………………………………...3 Step 2-set the feeding time and number of feedings daily…………..4 Step 3-set the feeding volume/portion size…………………………………4
GENERAL OPERATION……………………………………………………………….………5
How to review the settings……………………………………………….…….5
How to change a scheduled feeding time…………………………………….5 How to change a pre-set feeding portion size……………………………5 How to set the number of days to feed………………………………………….6 How to erase the pre-set feeding time and feeding volume…………6 How to record voice message to be played at the feeding times……6
How to manually feed your pet………………………………………………6 Alarm..6
How to lock and unlock the lid/top………………………………………………7 CARE AND CLEANING……………………………………………………………………………7 DISCONNECT AND RECONNECT OF THE FOOD TANK……………………………….8
Disconnect the food tank from the base…………………………………….....8
Connect the food tank from the base……………………………………….……8 IMPORTANT TIPS (Please Read)……………………………………………………………….9 CUSTOMER SUPPORT CENTER………………………………………………………………10
1
Qpets Large Capacity Automatic Pet Feeder can be set to feed your pet up to four different times in one day. Feeding time(s) and amount of food dispensed are adjustable. Easily record a 6 seconds personal voice message that will play at each scheduled feeding. Control panel clock/timer can display a 12 or 24 hr format.
4 D-size batteries are required (a red LED indicator will light up when batteries are low.).
Components:
1 x Qpets Large Capacity
Automatic Feeder with
Control Panel
1 x Feeder lid/top 1 x Food Tray 1 x User Manual
Quick Start Guide
Function of Control Panel Keys
ON SWITCH Turn the feeder on/off. Turn off only when not using for long
periods as this will RESET clock and feeding schedule
CLOCKDisplay clock (current time) TIMERSwitch between preset feeding times VOLAdjust feeding volume/portion-size SETEnter SET mode, and confirm any feeding time you enter and advance to
the scheduled next feeding time. Also use with VOL key to perform manual feeding
STARTStart the feeding schedule, confirm the clock and feeding time settings DAYSet the number of days to feed RECRecord your personal voice message PLAYPlay back your personal voice message
2
Getting started
1. Open the battery cover (located at the bottom of feeder).
2. Install four D size batteries.
3. Close the battery cover and turn on the switch. (located next to the battery
cover).
4. The feeder will cycle once until 12:00 is flashing on the LCD display.
5. You have 90 seconds to set the current time in order for the feeder to work
properly. If longer than 90 seconds The 1 07will display on the LCD display,
please turn off the power and wait for 1 minute, then switch back on.
6. Follow the steps 1-3 to set up the feeding schedule and portion size.
Step 1-Set the current time
1. All digits should be flashing.
2. Press the CLOCK key to set the hour (P on the upper left corner represents PM).
3. Press the TIMER key to set the minute.
4. Press the SET key to confirm the time (Now the LCD display will show 12 or 24
hour display mode).
5. Press the CLOCK key to toggle between 12hr/24 hr display mode.
6. Press the START key to confirm the clock setting.
7. LCD will display a flashing 1 07’. Now you are ready to set the feeding times.
3
+ 8 hidden pages