qpcom QP-108EC User Manual

www.qpcom.com

User’s Manual

QP-108EC

8 port 10/100M

Switch HUB

p

1

2 Package

3 Interface

Introduction

This manual describes how to install and use the NWay Ethernet Switch. It features 5 or 8
10/100Mbps Auto-Negotiation switch ports, provides the flexibility to fit into your working space
network environment. The NWa y Ethernet Switch can be used to connect PCs, servers,
bridges, other switches and routers. It can also acting as a bridge between 10Mbps and
networks segments. Thanks to the switching technology, it supports 10Mbps and
dedicated
as well as half and full-duplex operations, store-and- forward transmission scheme, IEEE802.3x
control and back pressure operation for easy installation and smooth transition from legacy
to 100Mbps Switched-Network. To ensure maximum safety and good function, please read
and follow all the directions in this manual to get successful installation and operation. It
recommended that you should have a basic understanding of Local area Networking (LAN)
such as bridging, IEEE802.3 10BASE-T Ethernet, and IEEE802.3u 100BASE-TX Fast

bandwidths in each port. The device is built with plug & play, auto-negotiation on all

Contents

The Ethernet Switch package

·

One 5 or 8 port 10/100Mbps NWay Ethernet

·

One DC power adapter (9V

·

One User’s

Manual

introduce

Front

The front panel of the switch provides status LEDs for "at-a-glance" system monitoring. The
table details the functions of the

Panel

with
hubs,
100Mbps

100Mbps

ports,

flow
10Mbps
carefully

is

concepts

Ethernet.

includes:

0.5A)

Switch

following

LEDs:

Port and System Status LEDs

LED Condition Status

Power Green

The switch is receiving

ower.

-2-