Qomo Interactive Whiteboard, QWB200EM, QWB100WSEM, QWB300EM Owner's Manual

Interactive Whiteboard

Owner’s Manual

V20100107

Qomo HiteVision, LLC

www.QOMO.com

—2—

Note: Attentions during installing and operating.

Caution: Damages to people during operating or damages to machine cause d by

improper operation.

 To prevent fire or electric shock, please don’t expose the whiteboard in rain or wet

environment.

 Interactive Whiteboard should avoid fire, electric shock and direct sunlight.

 Whiteboard’s net weight is 23~30kg. Please fix the whiteboard on the wall with

screws to make it safe.

 When use Interactive Whiteboard together with projector, please don’t look steadily

at the light sent by projector or look at it for a long time, especially for the children.

This manual is only for Interactive Whiteboard on “technical specification list”.

 You can write and operate on the whiteboard only with matched whiteboard pen.

 This product use electromagnetic calibration technology. There should not be strong

electromagnetic field nearby to prevent interference.

 If connecting Whiteboard and computer with USB cable, you’d better place the cable

in hidden place to avoid pulling.

 If connect Whiteboard and computer with USB cable, please use the attached USB

cable. If you would like to buy USB cable by yourself, please select the USB cable of

resistance lower than 0.5Ω.

 If connect Whiteboard and computer in wireless way, the distance between wireless

receiver and Interactive Whiteboard is no more than 15 meters. And there shouldn’t be

any barrier against electromagnetic waves.

 Don’t touch or scratch the Whiteboard panel and frame with hard and sharp object.

Don’t drill holes or drive nails in anywhere of the Whiteboard.

—3—

System Requirements ....................................................................................................................... 4

Instruction ......................................................................................................................................... 5

Software Features: ............................................................................................................................ 6

How to install hardware .................................................................................................................... 7

Install whiteboard ..................................................................................................................... 7

Install whiteboard on wall .............................................................................................. 7

Install whiteboard on floor stands ................................................................................ 9

Install whiteboard behind blackboard ........................................................................ 13

Install whiteboard pen ............................................................................................................ 15

How to use ..................................................................................................................... 15

Replace pen tip ............................................................................................................. 15

Replace battery ............................................................................................................. 15

Install eraser ............................................................................................................................ 16

Replace battery of eraser ............................................................................................ 16

How to use ..................................................................................................................... 17

Whiteboard Connection .......................................................................................................... 18

USB connection ............................................................................................................ 18

RF wireless connection ............................................................................................... 18

How to install and uninstall the software ............................................................................... 20

Install Software ............................................................................................................. 20

How to uninstall the software ...................................................................................... 22

Search and bind whiteboard ........................................................................................................... 23

Calibration ....................................................................................................................................... 26

*Two pen writing (optional) ............................................................................................................ 28

Problem Trouble Shooting............................................................................................................... 29

Questions and Answers ................................................................................................................... 33

Specification .................................................................................................................................... 34

—4—

System Requirements

Lowest Environmental Requirements:

· CPU: 1.0GHz×86

· Memory: 256M

· Display Card: Support 256 or above

· Hard Disk: 1G

· Screen Display Resolution: 800×600, 1024×768, 1280×1024

· USB 1.1 port

Recommended:

· CPU: 2.0GHz×86

· Memory: 512M or above

· Display Card: Support 256 or above

· Hard Disk: 2G

· Screen Display Resolution: 1024×768 、1280×1024

· USB2.0 port

Software Running Environment: Microsoft Windows 2000/XP/2003/Vista/7

—5—

Instruction

Interactive whiteboard uses scanning induction technology. Working together with

projector and computer, Interactive whiteboard can be used as a big writing panel. To

any image projected on the whiteboard, you can write on and touch the whiteboard

directly with writing pen. Interactive Whiteboard provides more advanced system

functions and more effective presentation than before.

Main Features:

 Writing: Write, draw and perform mouse functions with your finger. The whiteboard

displays your penmanship instantaneously.

 Annotating: The user can operate and annotate over any computer applications, or

save notes directly into Software, including PPT, WORD, EXECL, AVI, MEPG, Flash,

JPEG and etc.

 Interacting: In video conferencing, both parties can share data and write in real time

just like a standard conference room. Once integrated with Polycom or other video

conferencing systems, using Interactive whiteboard can improve video conference

results and efficiency. The system can support 12 screen short-cut buttons.

 Teaching: Can replace traditional teaching equipment, whiteboard software provides

different teaching range and level, improve teaching results and efficiency.

 Energy conservation: Controls energy cost within 2W. No need for additional.

 Connection: Provide two connection options: USB connection and wireless

connection, use can select based on their need.

—6—

Software Features:

Flow!Works(E) software has below features:

 Designed for teaching and conference systems.

 The screen display is high light and low glare.

 Saves images in Vector image format. Vector images take up less storage space and

makes file transferring easier and faster.

 Users can customize pen type, line width, and color schemes to fit their individual

preferences.

 Powerful screen functioning supports real-time editing.

 Graphic tools allow users to choose a background, input graphics and images.

 Paintbrush pen is pressure sensitive.

 Writing file allows for easy conversion to many other formats such as: PDF, JPG, GIF,

PNG, TIFF, BMP, etc.

 Simulate mouse operation.

 The Hot Keys can realize functions of Page up & Down, Create new page, Pen width

selection, Save, Clear full screen, Restore, etc.

 Supports other application software.

 Support handwriting recognition of Chinese word, English word, Number, and special

character’s.

—7—

How to install hardware

Install whiteboard

Before install whiteboard application software, please refer below instruction to install

whiteboard first. There are three installation ways based on different whiteboard model:

Install whiteboard on wall

Step 1: Set desired height according to user’s preferences, place the stilettos on the wall

to make holes for wall mounting parts and hook, then fix wall mounting parts and hook by

screws. Install hook at the lower and install wall mounting parts at the higher. Shown as

below:

Notes: For model QWB200EM/QWB100WS, the distance between wall mounting

parts is 1210.5mm. For model QWB300EM, the distance between wall mounting parts is

（1330.5）

—8—

1330.5mm.

Step 2: Install whiteboard on the wall mounting parts and hook. Shown as below:

Step 3: Fix the upper hook on the wall to fix whiteboard, if there is position problem during

installation, please use EVA cushion(45*20*1mm) to adjust, shown as below:

—9—

Install whiteboard on floor stands

There are two stands: A (SD10)type and B type. Please check your stand type before install.

A（SD10） Type：

Step 1: Open two vertical bars into triangle stand, fix their fixing screws C at two sides.

Step 2: Fix two middle bars on two vertical bars with fixing screws A and Screw B.

Step 3: According to your need, adjust hook to desired height.

Step 4: Referring “Install whiteboard on Wall” to install main control box.

Adjustable bar

Vertical bar

Middle bar
Movable hook

固定螺丝 B 固定螺丝 B 固定螺丝 B

Fixing screw B

Three hook position

Fixing Screw A

Fixing screw C

Wheel

Triangle stand

—10—

Step 5: Pull out adjustable bar, put whiteboard on hool and then put down adjustable bar,

shown as above.

Step 6: Fastern the fixing screws on two vertical bars.

B Type：

Step 1: Each stand includes four parts: Wheels, middle bard, and vertical bar (including

adjustable bar). Here are setup steps: 1). Fix four wheels on stand.2). Fix two vertical

bars on the wheel bars with screws (screw A and screw B positions on below picture). 3).

Fix the middle bar on two vertical bars with screws.

—11—

Step 2: Referring “Install whiteboard on Wall” to install main control box.

Step 3: Put the whiteboard on stands, the adjustable bar is flexible, adjust height you

desired and then fix with height adjustment screws. Shown as below:

—12—