To prevent fire for shock hazard, do not expose the unit to rain or moisture.
To prevent electrical shock, do not open the unit. Refer to qualified personnel for service
only.
Do not use the unit continuously for more than 24 hours with camera auto focus on. It
may cause damage to the camera lens.
Be careful not to spill water or other liquids onto the unit, or allow combustible or metallic
objects to get inside the base.
Unplug the visualizer from the wall outlet when it is not being used for a long period of
time.
Clean the unit with a soft cloth lightly moistened with a mild detergent solution.
Clean the lens carefully with an air spray or soft dry cloth to avoid scratching it.
Rotate the camera lens cap before powering the unit on.
Product Introduction
Thank you for purchasing the QPC30 Portable Document Camera. This visualizer comes with
a new design which is simple, flexible, portable, and with a high resolution. The visualizer can
be used to present 3D objects, texts, graphs, transparencies, and negative films. It can be
connected to a projector, PC, and other multi-media equipment. The visualizer is not just
equipment for the corporate environment but also a great tool for academic, medical, and
scientific communities.
There are six places on the camera where it can be adjusted. Do not rotate the parts beyond their
rotational capacity.
1. Mechanical Arm
This adjustment can increase and decrease an image. Holding the visualizer base with one
hand, adjust the mechanical arm with another hand up and down. The mechanical arm can
be moved from almost any angle.
There are four buttons located on top of the visualizer base:
Tele—Zoom In
Wide—Zoom Out
Light—LED Light on/off
Power on/off
Pilot Light—when the camera is in use, a blue light will be lit. When the camera is in standby mode,
the light will be red.
SD Card (30 M models only)
The SD card slot is available to add additional storage to the camera.
Display film negatives as normal pictures or turn normal images into
negative images.
Mirror
Reverse the image
XGA
Switch between XGA 1024 x 768 and SXGA 1280 x 1024 mode
Text
Switch between image and text mode
B&W
Switch between color and black & white mode
Title
Freeze the top 1/8 of the screen
Split
Split the screen in half. This freezes the image on the left and the
image on the right is live.
Projector Power
Not a supported function with this camera.
Projector Input
Not a supported function with this camera.
Exit
Exit the selected function. Return to default setting.
Tele/Wide
Increase/decrease the magnification
Far/Near
Focus far or near
Auto
To adjust brightness, auto white balance, and auto focus
Cam/PC1/PC2
Not a supported function with this camera.
S-Video/Video
Not a supported function with this camera.
Volume +/-
Not a supported function with this camera.
Red +/-
Increase or decrease the red hue.
Blue +/-
Increase or decrease the blue hue.
Bright +/-
Increase or decrease the brightness.
Scroll /
Not a supported function with this camera.
Computer Hardware
2.4 GHz
RAM 256 M or more
Graphic card 64M
USB 2.0 port
Hard drive 40 G or more
Monitor Display resolution XGA 1024 x 768 or higher
Operating System
Windows XP/Vista/7
USB Port
The USB port can be used to store still images from the camera in a computer. Connect the
camera to your computer with the supplied USB cable. Go to www.qomo.com to download the
latest version of the visualizer software.
High-speed USB 2.0 cable.
When connecting the visualizer to a desktop computer with the highspeed USB 2.0 cable provided, we recommend using the USB port
located on the rear of the mainframe. The USB port on the front of
the computer might have interference
Pickup Device
CMOS color sensor with 2.0 MP
Output Resolution
XGA 1024 x 768, SXGA 1280 x 1024
Zoom
4x Optical, 10x digital
Focus
Auto/Manual
White Balance
Auto/Manual
Camera Head Rotation
Horizonatally 180
Lens Rotation
Vertically 180
Negative/Postive Conversion
Yes
Black/White and Color Selection
Yes
Image Split
Yes
Image Title
Yes
Image Freeze
Yes
Image Rotate
0 90 180 270
Image Save and Recall
16 frames, 4x4 multiple screen display
RGB Output
DB15FLC x1
USB Port
USB 2.0
Power Source
12V/4A external AC adapter
Lighting
3W LED lamps
Operating
0-40 C / 32-105 F
Power
AC 100 ~ 240 V, 50/60 Hz
Dimensions:
Set Up: 341 x 262 x 492mm
Folded: 528 x 208 x 159mm
Weight
1.6 Kg
Product Specifications
Note: Design and specifications are subject to change without notice.