QOLSYS IQ Pendant-S Quick Install Manual

Housing Dimensions: 2.25”L x 1.25”W

Button Function: Press=Activate, Release=Restore!
Supervisory Signals: Hourly
Transmitter frequency: 319.5 MHz
Operating Temperature: 32°F~120°F
Storage Temperature: -30°F~140°F
Relative Humidity: 95% non-condensing

Battery: 3V CR2032 (x1). If low battery alarm occurs,
replace the battery within 7 days.

CAUTION: Battery may explode if mistreated. Do not
recharge, disassemble, or dispose of in fire.

DESCRIPTION

IQ PENDANT-S QUICK INSTALL GUIDE

SPECIFICATIONS

The IQ Pendant-S is a wireless handheld device that when pressed sends a wireless signal to the alarm
panel. Using our proprietary S-line encryption technology, it encrypts signals sent to the IQ Panel
while still providing backwards compatibility for legacy 319.5 systems.

The panic sensor can be used as a police, medical, or auxiliary alarm activation.

This is a quick guide for experienced installers only. Refer to http://dealers.qolsys.com (login required)

LEARN
INTO

PANEL

[e-mail]

Qolsys Inc. proprietary.

Reproduction without permission is not permitted.

STEP

2

STEP

1

Press and hold the
button down for two
seconds to send an
emergency panic
signal to the panel.

STEP

3

OPERATIONAL
DEVICE

TESTING

SENDING
PANIC

SIGNAL

Customize name and settings

as desired and and touch “ADD”

ADD

Press and hold down for two
seconds. The specific alarm should
immediately sound. Disarm the
system to silence the alarm.

Ensure to test in multiple locations
to verify communication.

Document#: IQP-S—QG-1-19
Revision#: 1/22/19
Issue Date: JAN 2019
Qolsys Product #: QS1332-840

FCC ID: 2ABBZ-RF-FOB-PANIC

IC: 11817A-RFFOBPANIC

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired

operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference

that may cause undesired operation of the device.

Cet appareil est conforme avec Industrie Canada exempts de licence standard RSS (s). Son fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne doit pas provoquer d'interférences et (2) cet appareil doit accepter toute

interférence, y compris celles pouvant causer un mauvais fonctionnement de l'appareil.

CONTACT TECH SUPPORT

GOT QUESTIONS?

Press and hold button to

“trigger” the device

Place your panel in

“autolearn" mode

12:55 PM

07/10/17

H 70°
L 56°

SYSTEM

DISARMED

Select

sensor group

Sensor Group

SECURE

CONNECTS

USING

319.5 MHz