QNect Q04 User Manual

Q04 WIRELESS HEADPHONES

BY QNECT

Thank you for purchasing your Bluetooth Wireless Headphones.

For best use of this device, we recommend that you read this user manual carefully and keep it for your records.

PACKAGE CONTENT

a. Wireless On-Ear Headphones
b. USB Charging Cable
c. 3,5 mm Audio Cable
d. Manual

KEY FEATURES

• Compatible with Bluetooth-enabled devices

• Also works as wired headphones with Audio cable

• Built in Microphone

• Built in rechargeable battery

• Volume and media control

SAFETY INSTRUCTIONS

• Keep the unit away from heat sources, direct sunlight,
humidity and water. This product is not a toy. Keep
out of reach of children.

• Do not use the unit at excessive levels as this may
couse hearing damage.

CHARGING THE HEADPHONES (#6)

The headphones come with a built in rechargeable bat­tery. Before using them for the rst time, we recom­mend charging the battery fully. Only use the supplied
micro USB cable to charge the battery.
Connect the USB cable to a computer USB port and the
micro USB plug to the charging jack of the headphones.
The red LED light will illuminate while the headphones
are charging. When the battery is fully charged, the LED
light will turn off automatically.

TURNING THE HEADPHONES ON/OFF (#1)

Power On: Press and hold the multi-function button for

2 seconds. You will hear a sound indicating the head­phones is on.
Power Off: Press and hold the multi-function button for
2 seconds.

PAIRING THE HEADPHONES

1. Turn the headphones on and the LED indicator will

start ashing blue and red. This will indicate that

your headphones are now in pairing mode.

2. Place the headphones and the Bluetooth device to

which you would like to pair within the operating
distance.

d.

a.

b.

c.

3. Ensure the Bluetooth feature is enabled on your
phone or music device.

4. Once you have activated Bluetooth on your device,
select “Q04” from the list of available Bluetooth de­vices.

5. Please note, pairing mode on the headphones will
last for two minutes. If no devices are paired after
two minutes, the headphones will automatically re­peat the pairing process.

6.

If the pairing is unsuccessful, turn off the head­phones and re-pair following the above steps.
Once you have paired the headphones with a de­vice, the headphones will remember this device
and will pair automatically when the device´s
Bluetooth is activated and within range. You do
not need to re-pair any previously connected de­vices.

USING HEADPHONES WITHOUT BLUETOOTH

Your headphones have a built in Audio input which will
allow you to listen to music from non-Bluetooth devic­es using a 3,5 mm Audio cable.

1. Insert one end of the Audio cable into the head­phones Audio input.

2. Insert the other end into your device´s headphones
jack.

3. Begin playing music.

Please Note

• Microphone may not be supported in this mode

• Play/Pause button is not supported in this mode

• Previous song/Volume up button is not supported in
this mode.

• Next song/Volume down button is not supported in
this mode.

IN USE

Use Bluetooth or use with included Audio cable if bat­tery is depleted.

MANUAL KEY FUNCTIONS

Your headphones are equipped with shortcut keys.
Please note the following functions:
Answering a call (#4): Press the ANSWER/END button
to answer a call. Press and hold the volume control
buttons to adjust the volume on your call.
Ending a Call (#4): During talking, press ANSWER/END
button again to end or disconnect the call.
Volume Control (#2+3): When listening to music or on
a call, you can adjust the volume by holding the Vol+ or
Vol- button accordingly.
Play & Pause (#1): In Music mode, press the Multi­Function button once to pause, and again to play. (Mu­sic will automatically pause when your device receives
a phone call)
Previous/Next Song (#2+3): When listening to music,
you can shift to next or previous song by pressing the
next or previous song button accordingly.

BATTERY MAINTENANCE

• In order to prolong battery life, turn off your head­phones when not in use.

• If the headphones are not in use for a long time, store
it in a dry, safe location. The headphones will need to
be charged every 2 months to maintain battery life.

GUIDE - KEY FUNCTIONS

1. Multi-Function Button

2. Previous song/Volume Up

3. Next Song/Volume Down

4. Phone Answer

5. Audio Cable Jack

6. USB Charging Jack

7. LED Indicator

8. Built-in Microphone

LED INDICATOR STATUS

Blue and red LED ashing means that the device is in
pairing mode. Three ashes mean that the device has

been connected.
Red LED on means that the battery is charging. The red
LED light turns off when the battery is fully charged.

TROUBLESHOOTING

• If the Bluetooth feature does not function or pow­ers off after powering on, the headphones are low in
power and needs to be recharged.

• If the device paired successfully, but there is no sound:

> Check to make sure the device and headphones

are connected correctly.

> Check whether the volume is set at minimum.
> Delete all paired Bluetooth devices and re-pair the

headphones.

• Your headphones are making unwanted noises:

• Make sure the devices are within effective operating
distance and no obstacles are blocking the signal.
If anything is blocking the signal, the sound may dis­tort or be fragmented in your headphones.

PLEASE SCAN THE QR
CODE FOR MANUAL IN
LOCAL LANGUAGE, OR
VISIT WWW.QNECT.EU

Aurora Group Denmark A/S
Lautruphøj 5-7. DK-2750 Ballerup. Auroragroup.eu