QNAP Systems TS-101 User Manual
TS-101 Turbo Station
User Manual (Version: 2.0.0)
©Copyright 2007. QNAP Systems, Inc. All Rights Reserved.
FOREWORD
Thank you for choosing QNAP products! This user manual provides detailed
instructions of using TS-101. Please read carefully and start to enjoy the
powerful functions of TS-101!
NOTE
• All features, functionality and other product specifications are subject to
change without prior notice or obligation.
• All brands and products names referred to are trademarks of their respective
holders.
LIMITED WARRANTY
In no event shall the liability of QNAP Systems, Inc. (QNAP) exceed the price paid
for the product from direct, indirect, special, incidental, or consequential software,
or its documentation. QNAP makes no warranty or representation, expressed,
implied, or statutory, with respect to its products or the contents or use of this
documentation and all accompanying software, and specifically disclaims its
quality, performance, merchantability, or fitness for any particular purpose. QNAP
reserves the right to revise or update its products, software, or documentation
without obligation to notify any individual or entity.
CAUTION
1. Back up your system periodically to avoid any potential data loss. QNAP
disclaims any responsibility of all sorts of data loss or recovery.
2. Should you return any components of TS-101 Turbo Station package for
refund or maintenance, make sure they are carefully packed for shipping.
Any form of damages due to improper packaging will not be compensated.
- 2 -
Table of Contents
Table of Contents .....................................................................................3
Safety Warnings.......................................................................................6
Chapter 1 Overview of TS-101 Turbo Station........................................7
1.1 Introduction ...................................................................................7
1.2 Package Contents............................................................................8
1.3 Hardware Illustration .......................................................................9
Chapter 2 Install TS-101.....................................................................10
2.1 Install Hard Disk ........................................................................... 10
2.2 Hard Disk Recommendation List ...................................................... 12
2.3 Set up TS-101 .............................................................................. 14
2.4 Check System Status..................................................................... 16
2.5 Configure Software Settings ........................................................... 18
2.5.1 Windows® Users......................................................................18
2.5.1.1 Using Mozilla Firefox..................................................................... 35
2.5.2 Mac Users...............................................................................37
Chapter 3 Start to Enjoy the Powerful Services of TS-101 ..................43
3.1 Server Administration .................................................................... 48
3.2 Quick Configuration ........................................................ 49
3.3 System Settings ............................................................ 53
3.3.1 Server Name...........................................................................53
3.3.2 Date & Time ...........................................................................54
3.3.3 Encoding Setting .....................................................................55
3.3.4 View System Settings...............................................................55
3.4 Network Settings ...........................................................56
3.4.1 TCP/ IP Configuration...............................................................56
3.4.2 Microsoft Networking................................................................59
3.4.3 Apple Network.........................................................................61
3.4.4 Web File Manager....................................................................61
3.4.5 FTP Service.............................................................................62
- 3 -
3.4.6 Multimedia Station................................................................... 64
3.4.7 Download Station .................................................................... 65
3.4.8 Web Server ............................................................................ 66
3.4.9 DDNS Service .........................................................................67
3.4.10 View Network Settings...........................................................69
3.5 Device Configuration ......................................................70
3.5.1 SATA Disk ..............................................................................70
3.5.2 USB Disk................................................................................71
3.5.3 USB Printer............................................................................. 73
3.5.4 eSATA Disk.............................................................................75
3.6 User Management .......................................................... 77
3.6.1 Users.....................................................................................77
3.6.2 User Groups............................................................................79
3.6.3 Quota .................................................................................... 84
3.7 Network Share Management ............................................ 86
3.7.1 Create ................................................................................... 87
3.7.2 Property................................................................................. 88
3.7.3 Access Control ........................................................................89
3.7.4 Delete....................................................................................89
3.8 System Tools ................................................................. 90
3.8.1 Alert Notification......................................................................91
3.8.2 Restart/ Shutdown................................................................... 91
3.8.3 Hardware Settings................................................................... 92
3.8.4 System Update........................................................................93
3.8.5 Change Logo...........................................................................94
3.8.6 Remote Replication (Disaster Recovery)...................................... 95
3.8.7 Backup/ Restore/ Reset Settings................................................98
3.8.8 Network Recycle Bin ................................................................99
3.9 Event Logs .................................................................. 100
Chapter 4 Copy Data Directly by Front USB Port to TS-101 ...............101
Chapter 5 Multimedia Station............................................................103
5.1 Share Photos and Multimedia Files via Web Interface........................ 103
- 4 -
5.2 Enable iTunes Service .................................................................. 110
5.3 Use UPnP Media Server ................................................................ 112
Chapter 6 Download Station .............................................................115
Chapter 7 Web Server.......................................................................125
Chapter 8 FTP Server ........................................................................129
Chapter 9 Web File Manager .............................................................132
Chapter 10 NetBak Replicator ...................................................138
Chapter 11 TS-101 Maintenance ......................................................153
11.1 Restart/ Shut down Server......................................................... 153
11.2 Reset Administrator Password and Network Settings...................... 154
11.3 Disk Failure or Malfunction......................................................... 155
11.4 Power Outage or Abnormal Shutdown.......................................... 155
Technical Support ................................................................................156
GNU GENERAL PUBLIC LICENSE ...........................................................157
- 5 -
Safety Warnings
1. TS-101 can operate normally in the temperature of 0ºC-35ºC and relative
humidity of 0%-85%. Please make sure the environment is well-ventilated.
2. The power cord and devices connected to TS-101 must provide correct
supply voltage (36W, 90-264V).
3. Do not place TS-101 in direct sunlight or near chemicals. Make sure the
temperature and humidity of the environment are in optimized level.
4. Unplug the power cord and all connected cables before cleaning. Wipe TS-
101 with wet towel. Do not use chemical or aerosol to clean TS-101.
5. Do not place any objects on TS-101 for the server’s normal operation and to
avoid overheat.
6. Use the flat head screws in the product package to fasten the hard disk in
TS-101 when installing hard disk for proper operation.
7. Do not place TS-101 near any liquid.
8. Do not place TS-101 on any uneven surface to avoid falling off and damage.
9. Make sure the voltage is correct in your location when using TS-101. If you
are not sure, please contact the distributor or the local power supply
company.
10. Do not place any object on the power cord.
11. Do not attempt to repair your TS-101 in any occasions. Improper
disassembly of the product may expose you to electric shock or other risks.
For any enquiries, please contact the distributor.
- 6 -
Chapter 1 Overview of TS-101 Turbo Station
1.1 Introduction
Thank you for choosing TS-101 Turbo Station. This product has the following key
features:
9 9-in-1 server: Multimedia Station, Download Station, Mirror Station, Disaster
Recovery, Web Server, Backup Server, File Server, FTP Server, and Printer
Server.
9 Easy-to-use, simple configuration in a few steps and TS-101 is ready to use!
9 Enormous storage capacity, support SATA disk of up to 500GB or above, and
extendable to 1TB or more by eSATA/ USB port.
9 Web interface for authority configuration and folder management, even novice
can mange the server easily
9 Supports PHP and SQLite to establish interactive websites
9 Embedded digital album supports automatic thumbnail generation, easy
backup, browsing and sharing of photos
9 Supports UPnP (DLNA compatible) multimedia technology for sharing of
multimedia files at home
9 Supports iTunes service to enable computers in LAN to play the songs shared
by TS-101 via iTunes.
9 3 high speed USB 2.0 ports to support multiple USB devices like printer, disk,
digital camera, thumb drive, card reader etc. to provide diversified functions.
9 High speed transfer, 480Mbps USB 2.0, Gigabit Ethernet, 1.5GB SATA high
speed file transfer. With highly efficient block level algorithm, data transfer
can be done instantly.
9 Block level remote replication for secure data backup
9 Incomparable high reliability: NetBak Replicator for instant and schedule
backup
9 Stylish aluminum design, the best heat dissipation, shock-resistance, anti-
collision aluminum design
9 Fanless design, absolutely quiet
9 BT, HTTP and FTP download independent of computer to minimize electricity
expense
9 Supports Network Recycle Bin, files deleted by mistake can be restored
- 7 -
1.2 Package Contents
Your TS-101 package contains:
9 TS-101 Turbo Station
9 Adaptor
9 Power cord
9 CD-ROM (user manual,
Quick Install Wizard
and software inclusive)
9 Ethernet cable x 1
9 Quick Installation
Guide
9 Stand x 2
9 Flat head screw x 4
- 8 -
1.3 Hardware Illustration
One Touch Copy Button
USB Ports
LED indicators:
Status, HDD,
eSATA, LAN and
Power
Reset Button
Power Connector
Power Button
eSATA
Giga LAN
Power Cord Hook
K-Lock
Security Slot
- 9 -
Chapter 2 Install TS-101
2.1 Install Hard Disk
1. Unfasten the two round head screws at the back of TS-101. Pull out the front
case of TS-101 as shown below:
Pull Pull
2. Install a hard disk in TS-101 drive plate. Make sure the disk holes of the disk
match the holes of drive plate. Lock the disk with flat head screws.
- 10 -
3. After installing the disk, cover TS-101 with the front case and fasten the
round head screws. Then place TS-101 vertically on the stands.
- 11 -
2.2 Hard Disk Recommendation List
The following HDD models are verified by QNAP that are compatible with TS-101.
It is recommended to use the disk models listed here. Other HDD brands that are
not tested by QNAP may or may not work properly with TS-101. For more
updated compatible hard disk information, please visit QNAP website at
http://www.qnap.com.
QNAP disclaims any responsibility for product damage/
malfunction or data loss/ recovery due to misuse or improper
installation of hard disks in any occasions for any reasons.
Seagate
Model Name Model No. Interface
Barracuda 7200.10 SATA ST3750640AS
Barracuda 7200.9 SATA ST3500641AS
Barracuda 7200.9 SATA ST3400633AS
Barracuda 7200.8 SATA ST3400832AS
Barracuda 7200.9 SATA ST3300622AS
Barracuda 7200.10 SATA ST3250620AS
Barracuda 7200.9 SATA ST3250824AS
Barracuda 7200.8 SATA ST3250823AS
Barracuda 7200.7 SATA ST3160827AS
Barracuda 7200.7 SATA ST3120827AS
SATA II 3Gb/s
with NCQ
SATA II 3Gb/s
with NCQ
SATA II 3Gb/s
with NCQ
SATA 1.5Gb/s
with NCQ
SATA II 3Gb/s
with NCQ
SATA II 3Gb/s
with NCQ
SATA II 3Gb/s
with NCQ
SATA 1.5Gb/s
with NCQ
SATA 1.5Gb/s
with NCQ
SATA 1.5Gb/s
with NCQ
Capacity
(GB)
750 7200 16
500 7200 16
400 7200 16
400 7200 8
300 7200 16
250 7200 16
250 7200 8
250 7200 8
160 7200 8
120 7200 8
Rotational
Speed
(RPM)
Buffer
Size
(MB)
Hitachi
Model Name Model No. Interface
Desk star 7K500 HDS725050KLA360
Desk star 7K400 HDS724040KLSA80 SATA 1.5Gb/s 400 7200 8
Deskstar 7K250 HDS722525VLSA80
SATA II 3Gb/s
with NCQ
SATA 1.5Gb/s
with NCQ
Capacity
(GB)
500 7200 16
250 7200 8
Rotational
Speed
(RPM)
Buffer
Size
(MB)
- 12 -
Maxtor
Model Name Model No.
Grizzly 3H500F0 SATA II 3Gb/s 500 7200 16
Grizzly 3H400F0 SATA II 3Gb/s 400 7200 16
DiamondMax 10 6L300S0 SATA 1.5Gb/s with NCQ 300 7200 16
DiamondMax 10 6B300S0 SATA 1.5Gb/s with NCQ 300 7200 16
DiamondMax 10 6L250S0 SATA 1.5Gb/s with NCQ 250 7200 16
MaxLine Plus II 7Y250M0 SATA 1.5Gb/s 250 7200 8
DiamondMax 10 6L200M0 SATA 1.5Gb/s with NCQ 200 7200 8
DiamondMax 10 6B200M0 SATA 1.5Gb/s with NCQ 200 7200 8
Interface
Capacity
(GB)
Rotational
Speed (RPM)
Buffer
Size
(MB)
Western Digital
Model Name Model No.
WD Caviar SE16 WD5000KS SATA II 3Gb/s
WD Caviar SE16 WD4000KS SATA II 3Gb/s
Interface
Capacity
(GB)
500 7200 16
400 7200 16
Rotational
Speed
(RPM)
Buffer
Size
(MB)
WD Caviar® SE Serial ATA WD4000KD SATA 1.5Gb/s 400 7200 16
WD Caviar® RE2 WD4000YR SATA 1.5Gb/s 400 7200 16
WD Caviar SE16 WD3200KS SATA II 3Gb/s
WD Caviar SE16 WD2500KS SATA II 3Gb/s
WD Caviar® SE Serial ATA WD2500KD SATA 1.5Gb/s 250 7200 16
WD Caviar SE WD2000JS SATA II 3Gb/s
WD Caviar SE WD1600JS SATA II 3Gb/s
WD Caviar® SE Serial ATA WD1600JD SATA 1.5Gb/s 160 7200 8
320 7200 16
250 7200 16
200 7200 8
160 7200 8
- 13 -
2.3 Set up TS-101
Please check your network environment and select the appropriate installation
method before installing TS-101.
1. Office/ Home
Connect TS-101 and PC to the same hub/ switch/ router.
2. Individual
Connect TS-101 directly to your PC by a network cable.
- 14 -
When you have verified your network environment, please follow the steps below
to install TS-101.
* Note: Please connect a USB printer to the server after the software
configuration is completed.
- 15 -
2.4 Check System Status
TS-101 provides LED indicators for you to indicate system status and information
easily. When TS-101 is turned on, please check the following items to make sure
system status is normal.
LED System starting up System has started
n Power
o Network (LAN)
q Hard disk (HDD)
r Status
Blue Blue
Blink in orange Orange
OrangeÆBlink in orange Off
Blink in red (short beep once) Æ
Blink in green (long beep once)
Green
- 16 -
LED Display & System Status Overview
LED LED Display & System Status
n Power
o Network
p eSATA
q HDD
r Status
s Front USB Status
Blue: System has started
Blink in orange: Accessing network
Blink in orange: Accessing data
Blink in orange: Accessing data
Green: System is normal
Blink in green: Hard disk not detected
Blink in red: Bad blocks are found in hard disk
Blink in green for 5 seconds, blink in green and red
alternatively: Hard disk not initialized
Blink in green and red alternatively: Disk capacity is
almost full (long beep twice)
Blink in red: Disk full
Blue: You can press the copy button to copy data.
Blink in blue: Accessing data
Action LED Process Finish
Update firmware
System shut down
nPower
rStatus
nPower
rStatus
Other Status
Blink in blue Blue
Blink in green and
red alternatively
Blink in blue Off
Off (short beep once) Off
Green (long beep
thrice)
- 17 -
2.5 Configure Software Settings
After checking the system status, please follow the steps below to configure the
software settings of TS-101. The configuration procedure of Windows
users are different. Please select the appropriate procedure according to your OS.
2.5.1 Windows® Users
Insert TS-101 CD-ROM in your PC. Wait for a few seconds until the following
screen shows up. Then start to configure the software settings of TS-101.
1. Select TS-101.
®
and Mac
- 18 -
2. Select Install Quick Install Wizard.
- 19 -
3. Run Quick Install Wizard. When the wizard prompts for performing quick
configuration, click OK.
4. Enter the default user name and password.
Default user name: administrator
Password: admin
- 20 -
When you have entered quick configuration page, follow the instructions to
complete the settings. Click Next to continue.
- 21 -
Step 1. Enter the server name and click Next.
- 22 -
Step 2. Enter a new password or select to use the original password. Click
Next to continue.
- 23 -
Step 3. Select the time zone of your location or enter the date and time
manually. You can also select to synchronize the time of TS-101 with an
Internet time server automatically. Click Next to continue.
- 24 -
Step 4. Select the encoding language of TS-101 and click Next.
Note: All files and directories on TS-101 will be created using
Unicode encoding. If your FTP client or PC does not support
Unicode, e.g. Windows
®
95, 98, ME OS, select the language the
same as the OS of your PC here in order to view the files and
directories on the server properly.
- 25 -
Step 5. It is recommended to use DHCP protocol to acquire IP address
automatically. If your network does not support DHCP, please enter the IP
address settings and click Next.
Note: If you select to enter IP address manually, please make sure
your PC and TS-101 are in the same LAN. If you are not sure about
the network settings, please contact your network administrator or
ISP.
- 26 -
Step 6. When a new hard disk is installed in TS-101, select “Initialize the hard
disk now” and click Next to format and initialize the disk.
Warning: All disk data will be cleared after disk initialization.
- 27 -
Step 7. You have finished quick configuration. Please make sure all settings
are correct and click Next to start disk formatting.
- 28 -
Step 8. Please wait patiently when the disk is being formatted. Formatting
may take a few minutes depending on the capacity of your hard drive. When
the disk is formatted, click Next to proceed.
- 29 -
Congratulations! You have finished Quick Configuration. Your TS-101 is ready
to use.
TS-101 provides several default share folders for data sharing and access. To
map the share folders on TS-101 as your drive, check the option “Continue
to map network drive for me” and follow the steps below to proceed. To
start to use TS-101 immediately, you can skip to 5.
- 30 -
Loading...