QNAP TVS-672XT-i3-8G User Manual

Hardware Specification

TVS-672XT-i3-8G

CPU Intel® Core™ i3-8100T 4-core 3.1 GHz processor

Architecture: 64-bit
Graphics: Intel® UHD Graphics 630

Encryption Acceleration Yes (AES-NI)

System Memory 8 GB SODIMM DDR4 (2 x 4 GB)

Maximum Memory 32 GB ( 2 x 16 GB)

Memory Slot 2 x SO-DIMM DDR4

(For dual- or quad-DIMM configurations, you must use a pair of identical
DDR4 modules.)

Flash Memory 4 GB (Dual boot OS protection)

Drive Bay Hot-swappable 6 x 3.5-inch SATA 6 Gbps bays

Drive Compatibility 3.5-inch bays:

3.5-inch SATA hard disk drives

2.5-inch SATA hard disk drives

2.5-inch SATA solid state drives

M.2 SSD Slot 2 x M.2 2280 PCIe (Gen3 x2) NVMe slots

Thunderbolt Port 2 x Thunderbolt™ 3 ports

10 Gigabit Ethernet Port 1 x 10GBASE-T RJ45, supporting 10G/5G/2.5G/1G/100M

Note: Please use CAT6a or CAT 7 LAN cables (sold separately) to achieve
10GbE speed

Gigabit Ethernet Port 2 x RJ45

PCIe Slot Slot 1: PCIe Gen3 x16 (CPU)

Slot 2: PCIe Gen3 x4 (PCH)

Note: Slot 1 is pre-installed with a Thunderbolt 3 adapter

USB Port 1 x USB 3.0

2 x Type-C USB 3.1 Gen2 5V/3A 10Gbps
2 x Type-A USB 3.1 Gen2 5V/1A 10Gbps

HDMI Output 1 x HDMI 2.0, up to 3840 x 2160, @60Hz

Audio 1 x 3.5 mm dynamic microphone jack

1 x 3.5 mm line-out jack
1 x speaker

Note: You cannot use the speakers and the line-out jack simultaneously.

IR sensor Yes , supports QNAP RM-IR004 remote control

LED Indicators HDD 1-6, Status, LAN, USB port, M.2 port

Buttons Power, Reset, USB One-touch-copy

Form Factor Tower

Dimensions (H x W x D) 188.2 x 264.3 x 279.6 mm

7.4 x 10.4 x 11 inch

Power Supply Unit 250W, 100-240V

Power Consumption (W) HDD standby: 26.52 W

In operation: 45.6 W
(with WD10EFRX drives fully populated)

Fan System: 2 x 9.2cm fan (12V DC)

CPU: 2 x 6cm blower fan

Sound Level Sound pressure (LpAm): 23.8 dB(A)

System Warning Voice prompts or Buzzer

Operating Temperature & Relative
Humidity

0 ~ 40˚C ( 32˚F ~ 104˚F ), 5 ~ 95% RH non-condensing, wet bulb: 27˚C
(80.6˚F)

Security Slot Kensington security slot

Note: Use only QNAP memory modules to maintain system performance and stability. For NAS devices with more than one memory
slot, use QNAP modules with identical specifications. Warning: Using unsupported modules may degrade performance, cause errors,
or prevent the operating system from starting.
* Sound Level Test Environment: Refer to ISO 7779; Maximum HDD loaded; Bystander Position; Average data from 1 meter in front
of operating NAS.
Designs and specifications are subject to change without notice.