Qnap TVS-1282T-I7-32G User Manual

Perfect Combination between Hardware and Software

TVS-x82T

6/8/12-bay Thunderbolt NAS Series

DAS, NAS and iSCSI SAN Integrated Combo Solution

TVS-1282T

TVS-882T

TVS-x82T Series

Use your Turbo vNAS as a PC

6th generation Intel Core i3/i5/i7 multi-core

1

processor provides up to 20% higher performance

8GB (up to 64GB) DDR4 2133MHz RAM

2

Thunderbolt™ 2 port for 20Gbps ultra-high

3

transmission speeds

40GbE and 10GbE network interfaces for

4

high-speed le sharing

M.2 SATA 6GB/s and SSD slots with support for PCIe

5

NVMe SSD

2 x M.2 Slots

TVS-682T

Dual

10Gbase-T
LAN Ports

2
3

4

Dual Network
Technologies

Thunderbolt™ 2 / Ethernet network

Mode Consolidated
Storage System

DAS / NAS / iSCSI SAN

Use Cases

Highly expandable (vNAS+JBOD+JBOD)

Highly applicable (Mac+vNAS+JBOD)

High-speed sharing (Mac x2+vNAS)

Flexible trac distribution (Mac+vNAS+vNAS+Mac)

DDR4 2133

Max 64GB RAM

40

GbE

Ready

VJBOD

x 4

Quad

GbE Ports

Storage

Expansion

M.2 SATA 6Gb/s and SSD slots

24/7 acceleration with Qtier and SSD cache technology

Instantly nd les and documents using Qsirch

Flexible and comprehensive storage expansion solution

Daisy-chain QNAP ThunderboltTM 2 with TX-500P / TX-800P

Supports high-speed USB 3.1 10Gbps external storage

Virtual JBOD

Optimized fan controls for absolute silence

1

Side View

Rear View

pre-installed with Thunderbolt

Hyperconverged infrastructure
for next-generation performance
and protection

Three HDMI ports

duplicated and extended desktop options

Four Gigabit Ethernet ports

Ideal for service binding, port trunking and MPIO

jack

headphone for audio output

connection

Support for 10/40 GbE adapters, PCIe NVMe SSD, external

graphics cards, and USB 3.1 expansion cards

expansion slots*

TVS-x82T Series

TVS-1282T

Three PCIe

PCIe Gen. 3 high-speed


*

Two of the three PCIe slots are

Thunderbolt NAS

congurations

Triple HDMI output with

3.5mm audio

Connects to a speaker or a

P.2

Four built-in SSD 2.5" slots

P.9

Oers exible conguration in tiered storage and enables cache
acceleration

P.2

Tool-less HDD tray and installation

2

2.5” HDD/SSD

2

3.5” HDD/SSD

1

3

1

2

Two built-in M.2 slots*

Supports SATA 6Gb/s M.2 SSDs with 2242, 2260,
2280, and 22110 form factors

Allows for the best exibility in tiered storage
conguration and enables cache acceleration

*

M.2 SSD is optional

DDR4 2133 MHz
memory

Supports four DDR4 memory modules with a
maximum of 64GB in total

6th Generation Intel®
Core™ Processor

Featuring the latest14nm manufacturing technology
with faster buses to support DDR4, PCIe Gen. 3, and
DMI 3.0 for incredible performance and extremely
ecient data transmission.

P.1

P.1

P.1

*

TM

and 10GbE adapters

TVS-x82T Series

P.2

P.10

P.3

P.4

Smart fans for
quiet operation

Separately detect the CPU and HDD
temperatures to dynamically control fan speed.

Built-in dual

P.10

10GBASE-T
network port

P.5

Two Thunderbolt
connectors

Industry-leading converged storage with
ThunderboltTM DAS/NAS/iSCSI connectivity

TM

P.4

Two built-in
speakers

For direct audio output

Provides verbal system warnings

3

Side View

Rear View

背視圖

output with duplicated and extended desktop options

Four

binding, port trunking, and MPIO congurations

audio jack

Two built

For direct audio output

Provides verbal system warnings

Supports 4 DDR4 memory modules with a maximum of 64GB in total

Intel® Core™ Processor

14nm manufacturing technology with faster

DDR4, PCIe Gen. 3, and DMI 3.0 for incredible

extremely ecient data transmission

Thu

converged storage with Thunderbolt

Smart

Separately detect the CPU and HDD temperatures to dynamically control fan speed

system fans whereas TVS-682T has 1 system fan)

two M.2 slots*

6Gb/s M.2 SSDs with 2242, 2260, 2280, and 22110 form factors

best exibility in tiered storage conguration and enables cache acceleration

TVS-x82T Series

TVS-882T

Thunderbolt NAS

(TVS-882T and TVS-682T)

P.9

Built-in two SSD 2.5" slots

Oers exible conguration in tiered storage and enables cache acceleration

P.2

Tool-less HDD tray and installation

Built-in

P.1

Supports SATA

Allows for the

P.1

DDR4 2133 MHz memory

6th Gen.

P.1

Featuring the latest
buses to support
performance and

P.10

Built-in

P.5

Two

Industry-leading
connectivity

P.2

(TVS-882T has 2

4

P.10

Ideal for service

P.3

Three HDMI ports

Triple HDMI

3.5mm

P.4

Connects to a

P.4





背視圖

speaker or a headphone for audio output

TVS-x82T Series

TVS-682T

Thunderbolt NAS

*

memory modules with a maximum of 64GB in total

*

M.2 SSD is optional

dual 10GBASE-T network port

nderboltTM connectors

TM

DAS/NAS/iSCSI

fans for quiet operation

system fans whereas TVS-682T has 1 system fan)

Built-in two SSD 2.5" slots

P.9

Oers exible conguration in tiered storage and enables cache
acceleration

Tool-less HDD tray and installation

P.2

Gigabit Ethernet ports

audio jack

-in speakers

5

Thunderbolt™ 2 DAS, NAS, iSCSI SAN
Triple Solution

TVS-x82T Series

High-performance I/O throughput

2

Thunderbolt™ 2 Revolution

Thunderbolt™ 2 is the latest high-bandwidth connection technology from

Intel. With an amazing 20Gbps transmission rate, Thunderbolt™ 2 delivers more

than twice the data transfer bandwidth of the rst generation Thunderbolt™

and is four times faster than USB 3.

Thunderbolt™ 2 Expansion Enclosure

The QNAP TX-500P/TX-800P expansion enclosures are cost eective expansion

alternatives designed to augment your existing general storage with minimal

setup required. The TX-500P/TX-800P offers hassle-free storage expansion

suitable for home/small office uses. The TVS-x82T can connect up to six

TX-800P and TX-500P with a daisy-chain configuration. The Thunderbolt 2

expansion enclosure is ideal for data backup, digital media collection, and

video surveillance archives.

High-performance I/O throughput

20 Gb/s

10 Gb/s

5 Gb/s

0.8 Gb/s

0.5 Gb/s

Thunderbolt™ 2

Thunderbolt™

USB 3.0

FireWire 800

USB 2.0

QNAP Thunderbolt™ 2 Solutions
The world's most powerful Thunderbolt™ 2 vNAS

The QNAP TVS-x82T is the successor to TVS-871T (QNAP’s rst Thunderbolt™ 2 NAS)

and oers a comprehensive DAS/NAS/iSCSI SAN multi-mode storage solution

in a diminutive form factor. The TVS-x82T not only features Thunderbolt™

2 technology but also has dual 10GbE ports built-in giving you incredible

exibility to deliver incredible performance. The TVS-x82T is a perfect match

for Thunderbolt- equipped Mac users and Windows PC users with very

demanding 4K workows, le storage, and backup needs.

Network Technologies

The Thunderbolt™ 2 protocol uses industry-standard networking technologies, meaning the high-speed transmission over your Thunderbolt™ 2 cable is able to run all

network services (such as le sharing, FTP and other services). The TVS-x82T can also simultaneously run general Ethernet services in addition to the Thunderbolt™ 2

network, completely independently and with no bandwidth interference.

6

Thunderbolt™ 2

Thunderbolt 2

cable

Standard network protocols

Dedicated

bandwidth

TVS-x82T

Ethernet

Network

cable

Storage technologies

2

3

WIN

Direct-attached storage (DAS)

1

Plug & Play without IP settings Direct-attached NAS to PC

or Mac Super-high speed access to your shared folders

with Thunderbolt 2 connectivity.

TVS-x82T Series

Shared !

2

Network-attached storage (vNAS)

Enjoy cross-platform access for high-speed backup and Ultra HD entertainment storage.

Ethernet IP

Mac

3

iSCSI SAN

Native support for iSCSI-SAN connections for building high-speed storage networks

Thunderbolt™ 2 IP

Ethernet Converter

Thunderbolt™ 2

Mac Finder

TVS-x82T

Thunderbolt™ 2 cable

Ethernet IP

Thunderbolt™ 2 IP

TVS-x82T

Final Cut Pro X

Why QNAP Thunderbolt™ 2 vNAS?

Use the Thunderbolt™ 2 cable to connect

your MacBook Pro, MacBook Air, iMac

Retina 5K, or your Thunderbolt Display

directly to your vNAS

Microsoft

Hyper-V

iSCSI SAN

DAS

NAS

Ethernet Converter

Ethernet IP

PC

Thunderbolt™ 2 cable

Access data with a directly attached Thunderbolt™ cable File-based DAS Block-based DAS

2 Macs or PCs can connect to a TVS-x82T and share data

Mac/Windows/Linux cross-platform sharing

Real time collaboration

Mac/Windows/Linux cross-platform sharing

Web, database, LDAP, VPN

Multimedia services

High speed block-based remote storage

Thunderbolt™ 2 IP

TVS-x82T

YES

YES

YES

YES

YES

YES

YES

TVS-x82T

Other

Thunderbolt™ JBOD

No

No

No

No

No

No

No

7

TVS-x82T Series

TVS-x82T

2

3

4

1

Application scenario Application scenario

Daisy-chain multiple TX-500P/TX-800P expansion units (up to 6 units with
an addition of 30/48 HDD drives) to expand the capacity of TVS-x82T with
the built-in Thunderbolt™ 2 ports. Then, utilize TVS-x82T's built-in 10GbE
network connectivity for multi-device le sharing over a 10GbE network.

Advantages Advantages





Key application scenarios

Highly expandable (vNAS+JBOD+JBOD) Highly versatile (Mac+vNAS+JBOD)

High bandwidth 10GbE networking

Huge capacity Thunderbolt 2 JBOD expansion

PC PC PC

JBOD

TX-800P

JBOD

10GbE

10GbE

vNAS

TVS-x82T TX-800P

Thunderbolt™ 2

TX-800P

JBOD

2

Attach one Mac workstation to the TVS-x82T via Thunderbolt™ 2 port for online video

editing with 20 gigabit bandwidth, while the other Thunderbolt™ 2 port can be used

for storage expansion by connecting up to six Thunderbolt™ expansion enclosures

(TX-800P/TX-500P) for a maximum of 448 TB in total storage capacity.

The best price-performance ratio of all high-speed storage solutions for Mac



users

Super-fast transmission, cross-platform le sharing



Enormous expansion capability with Thunderbolt 2 JBOD



Mac

1 Gigabit Switch

vNAS

Thunderbolt™ 2 cable

Thunderbolt™ 2 JBOD

expansion unit

JBOD

TX-800P

Network cable

3

High-speed sharing (Mac*2+vNAS)

Application scenario

When using two workstations to work together to speed up a project, you can

connect each workstation separately to the Thunderbolt™ 2 ports on the TVS-

x82T. Both workstations can enjoy 20Gb/s high speed for simultaneous video

editing.

Advantages

High-speed transmission between Two Macs or PCs and a Turbo vNAS



4

Flexible traffic distribution (Mac+vNAS+vNAS+Mac)

Application scenario

Large-scale video editing often requires multiple servers to

increase productivity with different workflow stages, such

as capturing, editing, production, post-production, and

dubbing. In this situation it can be helpful to daisy chain

additional 6 units of TVS-x82T to the original TVS-x82T and

arrange each NAS for serving dedicated workflow stages,

while the other Thunderbolt™ 2 port of the original TVS-x82T

can be connected to the workstation for smoothly accessing

large-sized video les.

Advantages

High-speed and dedicated network bandwidth between two Macs and a vNAS



TVS-x82T exible expansion capability (up to six TVS-x82T devices)



Mac

Mac

Thunderbolt™ 2

network

Dedicated

Thunderbolt™

Thunderbolt™ 2

network

Thunderbolt™ 2

Mac

vNAS

Mac

Thunderbolt™ 2

* Supports all major video editing software including Final Cut Pro X, Adobe Premiere

Pro, PowerDirector, etc.

Importing

PC

PC

PC

materials

conversion

Final lms

vNAS

TVS-x82T

vNAS

TVS-x82T (semi-nal works)

vNAS

TVS-x82T (nal works)

(original recordings)

Ethernet IP

Ethernet

Ethernet

ow distirubtion

TVS-x82T

Video

8

Realizing super-high-speed video editing with TVS-x82T

The QNAP TVS-x82T is the world's first Thunderbolt™ 2 NAS

designed to help the professional media and entertainment

industry meet the massive data demands of fully digital workows.

High performance and broad compatibility help deliver time and

cost savings, from image acquisition through post production. The

TVS-x82T delivers powerful and stable throughput for real-time

non-linear video editing, and also allows multi-track video editing

with the lowest latency. By supporting two Thunderbolt™ 2 ports,

2 Thunderbolt™-compatible devices can connect to the TVS-x82T

to simultaneously process real-time video editing. Furthermore, a

4K monitor can connect to the TVS-x82T via HDMI to directly play

4K videos for instant preview of the nal work. With 20 Gbps, bi-

directional for data & display, the ability to daisy-chain multiple

devices, and incredibly low latency, the QNAP TVS-x82T is an ideal

complement for media editing professionals.

4K

TVS-x82T Series

HDMI

TVS-x82T

Final Cut Pro X

Final Cut Pro X is the mainstream video editing app for Mac. To

enhance the user experience of mac users, we introduce Qnder

for Mac. With Qnder for Mac, editors can easily import videos

on the connected TVS-x82T to Mac workstations and process

real-time 4K media editing. Use Qnder to guide you through

the process of mounting shared folders using NFS (Network File

System).

Additionally, you can create an iSCSI LUN with a target on the

TVS-x82T and mount the target on a Mac for storage. Please

install iSCSI Initiator (ATTO Xtend SAN iSCSI Initiator or SNS

globalSAN® iSCSI Initiator) to connect to the iSCSI target.

Adobe Premiere Pro

Premiere Pro is the industry standard for professional video editing for

both Windows and Mac computers with an advanced video production

toolset for transcoding, editing visual effects, audio, and color

correction. Professional video editors can perform real-time 4K content

editing with the TVS-x82T using either the SMB or NFS protocol.

9

High-performance hardware, well-designed application functionalities and thoroughly-planned usage scenarios are
three distinctive cornerstones for achieving optimum performance. QNAP now introduces the key system performance
optimization trio: tiered storage, application-based partitioning and network traffic distribution that are especially
combined for the TVS-x82T series, facilitating optimized storage deployment based on dierent usage scenarios.

TVS-x82T Series

Perfect Storage Trio: Tiered Storage, Application-Based
Partitioning and Network Trac Distribution

Tiered Storage

Storage media directly determines the highest possible write speeds, but high-speed storage media are always the expensive option. As data used in modern business

becomes increasingly diverse, deploying a reliable, high-performance, top-quality, large-capacity and cost-eective storage solution can be a formidable challenge

facing enterprises. Therefore, a tiered storage system (tiering based on the system performance and capacity) can more eciently process data of dierent types,

largely boosting overall operational eciency for enterprises. The TVS-x82 series supports three storage methods (M.2 SATA 6Gb/s, 2.5” SSD and SATA HDD) and also

supports ultra-high speed PCIe NVMe SSD.

M.2

SSD

SATA HDD

PCIe NVMe SSD

Tiered Storage

Tier 0 Storage Tier 1 Storage Tier 2 Storage

Device Used PCIe NVMe SSD M.2 SATA 6Gb/s and SSD SATA HDD

Needs

Usage Scenarios

Data Usage Examples

Data Status Operating data Mainly operating data Mixed with operating and idle data

Measurement Standard

Low latency and high performance but with

lower capacity

Online transaction processing (OLTP)

database, online analytical processing (OLAP)

Records and logs, paging le metadata or index

le, replication of VM and VDI connections,

merging of I/O and performance

Focuses on high IOPS and low latency, low

capacity needs; high cost

Performance, capacities and

availability

Online database server, ERP database

Operating les, emails, networks,

database tables, audio, video, VM and

VDI, hosts

Focuses on IOPS, bandwidth, reliability

and low capacity needs

Lower performance, larger capacity,

cheaper

Email server, snapshots, online archiving,

large amounts of data

Main directory, data acquisition, disk-to-

disk (D2D) backup/restore

Focuses on capacity and reliability; cost is

relatively low for high-density capacities.

Qtier + Cache = 24/7 Acceleration

Qtier™ empowers automated-tiering storage solutions that can automatically

move frequently-accessed "hot" data to high-performance storage tiers

and infrequently-accessed "cold" data to lower-cost, higher-capacity drives

according to schedules, allowing businesses to enjoy exceptional application

performance and lower TCO of storage at the same time.

Before

Storage Pool

Storage Pool

After

SSD cache technology can move hot data to the SSD tier in real time based on

data access frequency. Leveraging Qtier and SSD technologies, the TVS-x82T

series NAS can ensure 24/7 acceleration for performance optimization.

10

SSD SATA HDD

Most Frequent Seldom Activity

SSD SATA HDD

Comprehensive storage combination

Qtier storage pool

iSCSI LUNVolume

M.2 SSD

read

cache

SSD

SATA HDD

Storage pool without Qtier

iSCSI LUNVolume

SSD

SATA HDD

SSD

read/write

cache

Storage pool without Qtier

iSCSI LUNVolume

SSD

SATA HDD

SSD

read/write

cache

TVS-x82T Series

Use PCIe NVMe as the read cache and

A

SSD+SATA HDD as the storage pool for Qtier

NVMe

iSCSI LUNVolume

read

cache

Qtier storage pool

SSD

SATA HDD

Application scenario: Ultra-high speed 24/7

accelerated performance with medium amount of

data variation, coupled with instantaneous large

number of connections; typical example: news

website database.

Use M.2 as the read cache and SSD+SATA

B

HDD as the storage pool for Qtier

M.2 SSD

iSCSI LUNVolume

read

cache

Qtier storage pool

SSD

SATA HDD

Application scenario: aordable 24/7 accelerated

performance.

Use SSD as the read/write cache and SATA

C

HDD for general purpose storage pool

SSD

read/write

cache

Storage pool without Qtier

SSD

SATA HDD

Application scenario: simultaneous accelerated

read and write performance and ideal for large data

volumes and huge changes in content that require

a fast response to hot data movement; typical

example: video editing.

Application-based Partitioning Network Traffic Distribution

iSCSI LUNVolume

QTS provides diverse applications and each application has different

performance requirements. For example, to ensure the integrity of recordings,

Surveillance Station requires higher-priority access to storage media, while

normal transmission speeds are sufficient for file sharing. However, when

multiple applications are running on the same storage media, the required

throughput level cannot be guaranteed as the storage media is busy handling

I/O requests from all of them. The TVS-x82T series supports three different

types of storage media: M.2, SSD and SATA hard drives and they can be

congured as independent partitions for dierent applications, ensuring the

throughput level for each application.

Virtual machine

partition

Virtualization Station

Surveillance

partition

SSD Pool

HDD Pool #1 HDD Pool #2

Network le

sharing

partition

System cache

M.2 cache

Network bandwidth essentially dictates the I/O performance for all NAS

services. If every application and service uses the same network interface, the

required bandwidth cannot be guaranteed for important applications and

applications that consume large bandwidth will probably use most of the

available bandwidth. For example, if the surveillance system, virtual machine,

and file sharing service all use the same network interface, the surveillance

system is likely to drop frames. Therefore, network trac distribution becomes

extremely important. With four 1GbE NIC and two 10GbE NICs, the TVS-x82T

series allows applications to use dedicated interfaces to meet network trac

distribution requirements. Network interfaces can also be easily managed with

the Network & Virtual Switch app.

Service layer

Container Container

Container Station Virtualization Station

Logical
network layer

Virtual Switch #1 Virtual Switch #2

Virtual

Virtual

network

network

interface

interface

1

2

Physical network layer

GbE

Virtual

port 1

network
interface

GbE

port 3

VM VM

Virtual

GbE

network

port 2

interface

3

4

Network Manager

GbE

port 4

Surveillance Station

10GbE

10GbE

port 1

port 2

Ethernet Switch

File Services

(iSCSI / Samba / FTP)

TBT

TBT

port

port

Thunderbolt Network

11

When I have multiple QNAP NAS units, or when I need to expand capacity on demand, how do I achieve the best
utilization of NAS storage? Use QNAP VJBOD (Virtual JBOD) to utilize storage resources of other QNAP NAS. VJBOD
enables you to create virtual storage pools and volumes on your local NAS. This will enable you to achieve the highest
storage utilization of the multiple QNAP NAS in your environment.

TVS-x82T Series

Virtual JBOD

Achieve the best capacity utilization among multiple QNAP NAS units

On-demand, instant storage capacity allocation

VJBOD is the QNAP implementation of software-defined storage and brings several benefits and practicalities to small and medium-sized business storage

architecture. Software-dened storage enables a high degree exibility and expand-on-demand capability. Use QNAP Virtual JBOD (VJBOD) to instantly allocate the

storage space from another QNAP NAS as an iSCSI LUN. Use the iSCSI LUN to create storage pools, take snapshots, make a clone from snapshots or index multimedia

les into the media library on the local NAS.

Direct attachment

(with eSATA, SAS, USB or

Conventional JBOD

Thunderbolt cable)

iSCSI

iSCSI

Virtual Pool 1

Network switch

QNAP VJBOD

iSCSI

Network connection

Virtual Pool 2

With the networked and virtual expansion units, online capacity expansion with all available space among multiple QNAP NAS is made possible in

lieu of attaching a physical expansion unit. This also helps maximizing the utilization of storage resources.

Remotely expand storage capacity

Enable the native iSCSI service and storage pool creation to allocate the capacity on it as Virtual JBOD. For example, a TVS-882T daisy-chained with six TX-800P

expansion units can have approximately 432TB raw storage capacity in total (calculated using 8TB HDDs). Further, the capacity can be easily expanded up to 1PB using

QNAP VJBOD.

* The support for iSCSI service and storage pool is required for the remote QNAP NAS. The maximum number of NAS for VJBOD conguration is 8

** QNAP VJBOD is only supported on the following models:

X89, X82, X80, X79, X71, X70,X63, X53, IS-400. QTS rmware 422 or later is required.

12

TVS-x82T Series

Intuitive and easy-to-use interface

It does not take complicated commands or procedures to set up Virtual JBOD. First you need two connected QNAP NAS. Then click “Virtual JBOD” in the Storage Manager in

QTS. Then follow the “Create Virtual Disk ” wizard to search for the remote NAS, check the available capacity, and add the space as a virtual disk on your local drive. Then you can

freely utilize and manage this virtual disk in Storage Manager, including checking the status and network location of this virtual disk*. This saves time from having to log in to a

remote NAS.

* The Q’center app oers convenient tools for you to monitor the status of remote NAS.

Step 1: Click "Virtual JBOD" in Storage Manger.

Step 3: Check the available space and create a virtual disk.

Step 2: Search for the remote NAS.

Step 4: The storage space is added as a virtual disk on your local drive.

Building high-performance VJBOD storage with super-high-seed 40GbE networking

VJBOD offers greater flexibility with online capacity expansion over traditional JBOD expansion. Build a high-performance VJBOD SAN with high-speed 40GbE

networking based on the highly converged integration of hardware and software technologies from QNAP. For data centers that demand high transmission, full

support for 10GbE or 40GbE network adapters and switches drive data transmission performance to be close to that of local disk. Furthermore, you can receive extra

performance benets by deploying Windows Ooaded Data Transfer (ODX) in Windows Server 2012 (or Windows Server 2012 R2, Windows Server 2012, Windows 81,

Windows 8) to directly transfer data between virtual disks within or between compatible JBOD expansion units, bypassing the host computer.

* The NAS apps do not support Ooaded Data Transfer (ODX).

VJBOD JBOD

Connection Interface Ethernet (1GbE, 10GbE, or 40GbE) USB 3.0, SAS 6G/12G

Max. Number of Connected Devices 8 virtual disks (multiple disks can be added from the same remote NAS) Depends on the NAS model (1~8 expansion units)

Connection Method Network Single connection or daisy-chained

Connection Redundancy Supports port trunking Not supported

Application Scenario Multiple QNAP NAS units oering the exibility in storage utilization

while maintaining the highest availability

* VJBOD cannot be used to expand local storage pools.

It can be used to expand local storage pools on a

single QNAP NAS unit.

13

Hardware Specications

TVS-x82T Series

Redundant network architecture to increase reliability of VJBOD

Online capacity expansion over the network does not cause an associated instability of storage space utilization. QNAP NAS equipped with two or more Ethernet ports

supports port trunking (link aggregation with multiple LAN ports). Compared with single-LAN transmission, port trunking increases the bandwidth of your NAS and

provides fail-safe trac to maintain network connectivity in the case of a connection failure. Furthermore, with port trunking, network trac will automatically achieve

load balancing for each connected device.

Network cable

Switch

VJBOD VJBOD

VJBOD + Port Trunking

(oers connection fault tolerance)

SAS or USB cable

Automatic VJBOD storage recovery after
auto-reconnection

In addition to Missing mode protection of locally attached JBOD expansions, VJBOD employs an advanced

mechanism for disconnection prevention. If the remote NAS experiences a power outage, disconnection, or

change in IP address, you will get warnings via event notications in QTS. Further, the NAS will automatically

try to reconnect and recover the VJBOD storage without user intervention.

JBOD

JBOD + SAS (or USB)

without fault tolerance

Instant migration of VJBOD without physical plug and unplug

Typically, to migrate an expansion unit, you would need to manually plug and unplug the device and transport it to the destination. However, with the VJBOD that can

be connected using iSCSI and safely detached as a storage pool in Storage Manager, virtual disks that have been detached from your NAS can be used again on other

NAS. Thus, the data and application on the virtual disks can be accessed on other NAS and shared among dierent QNAP NAS devices.

*For virtual disks that have been connected via iSCSI targets to be used in Virtual JBOD, they should be excluded from other iSCSI initiator connections.

14

Hardware Specications

TVS-x82T Series

NAS Model

Ordering SKU

CPU

Memory

Flash Memory

M.2 Slot

Drive Tray

Drive Interface

Thunderbolt 2
Ports

USB

Ethernet

Video Output

Audio Input

Audio Output

LED Indicators

Buttons

System warning

Form Factor

Dimensions

Weight

Sound Level
(dB)

Temperature

Relative
Humidity

Power Supply

PCIe Expansion
Slot

Fan

TVS-682T TVS-882T TVS-1282T

TVS-682T-i3-8G TVS-882T-i5-16G TVS-1282T-i5-16G TVS-1282T-i7-32G

Dual-core Intel® Core™ i3-6100 3.7
GHz processor

System memory: 8 GB DDR4 RAM

Memory modules pre-installed: 4 GB x2

2 x M.2 2242/2260/2280/22110 SATA 6Gb/s SSD

Note: The M.2 SSD is not included in the product package.

2 x 2.5” SSD

4 x 2.5”/3.5” hard drive or SSD

Note: Only one of the above audio output ports can work at a time. If a speaker is connected, the sound will output through the speaker.

231.9 x 224.9 x 319.8 mm 231.9 x 292.8 x 319.8 mm 234.6 x 369.9 x 319.8 mm 234.6 x 369.9 x 319.8 mm

Net (NAS only): 7.7 kg/16.96 lb

Gross (with the package and

accessories): 9.5 kg/ 20.94 lb

Sound pressure (LpAm) (bystander
position): 20.5 dB

(with 4 x Seagate ST2000VN000-1HJ164
HDDs installed)

2 (1* PCIe Gen3 x16; 1* PCIe Gen3 x4)

Note: Both PCle slots are occupied by a Thunderbolt™ 2 card and a 10GbE adapter.

System: 1 x 8 cm quiet cooling fan

CPU: 2 x 9cm fan

Quad-core Intel® Core™ i5-6500 3.6
GHz processor

Note: The pre-installed memory modules may need to be replaced when expanding the memory.

System memory: 16 GB DDR4 RAM

Memory modules pre-installed: 8 GB x2

2 x 2.5” SSD

6 x 2.5”/3.5” hard drive or SSD

Net (NAS only): 9.05 kg/19.95 lb

Gross (with the package and

accessories): 10.85 kg/ 23.92 lb

Sound pressure (LpAm) (bystander
position): 21.8 dB

(with 8 x Seagate ST2000VN000-1HJ164
HDDs installed)

System: 2 x 8 cm quiet cooling fan

CPU: 2 x 9cm fan

Maximum memory: 64 GB (16 GB x4)

SATA 6Gbps/3Gbps

2 x Thunderbolt™ 2 high-speed port

Front: 1 x USB 3.0 port / Back: 4 x USB 3.0 port

2 x 10 GbE port, 4 x GbE port

2 x 6.3mm microphone jack

2 x built-in speaker, 1 x 3.5mm Line-out jack

System status, 2.5” SSD, M.2 SSD, 3.5” HDD/SSD

Power, USB One-touch-copy backup, Reset

5~95% non-condensing, wet bulb: 27˚C

Input: 100-240V~, 3-1.5A, 60-50Hz, Output: 250W

Quad-core Intel® Core™

i5-6500 3.6 GHz processor

Total DIMM slots: 4

System memory: 16 GB DDR4 RAM

Memory modules pre-installed: 8 GB x2

512MB DOM

4 x 2.5” SSD

8 x 2.5”/3.5” hard drive or SSD

3

Buzzer

Tow er

Net (NAS only): 11.55kg/25.46 lb

Gross (with the package and

accessories): 13.65 kg/ 30.09 lb

Sound pressure (LpAm) (bystander
position): 21.6 dB

(with 12 x Seagate ST2000VN000-1HJ164
HDDs installed)

0-40˚C

Note: 2 PCle slots are occupied by a Thunderbolt™ 2 card and a 10GbE adapter.

System: 3 x 8 cm quiet cooling fan

CPU: 2 x 9cm fan

3 (1* PCIe Gen3 x8; 2* PCIe Gen3 x4)

Quad-core Intel® Core™

i7-6700 3.4 GHz processor

System memory: 32 GB DDR4 RAM

Memory modules pre-installed: 8 GB x4

4 x 2.5” SSD

8 x 2.5”/3.5” hard drive or SSD

Net (NAS only): 11.55kg/25.46 lb

Gross (with the package and

accessories): 13.65 kg/ 30.09 lb

Sound pressure (LpAm) (bystander
position): 21.6 dB

(with 12 x Seagate ST2000VN000-1HJ164
HDDs installed)

System: 3 x 8 cm quiet cooling fan

CPU: 2 x 9cm fan

* All specications are subject to change without notice.

For more information, please go to www.qnap.com

15

TVS-x82T Series

Perfect Combination between
Hardware and Software

TVS-x82T

6/8/12-bay Thunderbolt NAS Series

24/7 Acceleration Made Possible
With QNAP Qtier™ and SSD Cache Technologies

Super-fast Read & Write Cache

PCIe NVMe SSD

M.2 SATA SSD

Fast responses to online and real time data
access requests with SSD cache technology

Tiered

Storage

SATA

SSD

Hot Data Storage

Move frequently-accessed data to SSD
storage with scheduled data analyses using
Qtier technology to ensure long-lasting
and high system performance

SATA

HDD

Cold Data Storage

Move infrequently-accessed data to
large-capacity storage with scheduled data
analyses using Qtier technology

1

2

3

4

TVS-682T-i3-8G TVS-882T-i5-16G TVS-1282T-i5-16G

TVS-1282T-i7-32G

5

Systems, Inc.

TEL : [phone] FAX : [phone] Email: [e-mail]
Address：3F, No.22, Zhongxing Rd., Xizhi Dist., New Taipei City, 221, Taiwan

QNAP may make changes to specification and product descriptions at any time, without notice.
Copyright © 2016 QNAP Systems, Inc. All rights reserved. QNAP® and other names of QNAP Products are proprietary marks or registered
trademarks of QNAP Systems, Inc. Other products and company names mentioned herein are trademarks of their respective holders.

Celeron is a trademark of Intel Corporation in the U.S. and/or other countries.
All trademarks are the property of their respective owners.

Netherlands (Warehouse Services)

Email：[e-mail]
TEL：[phone]

India

Email：[e-mail]

16

Germany

Email：[e-mail]
TEL：[phone]

US

Email：[e-mail]
TEL：[phone]

China

Email：[e-mail]
TEL：[phone]

Thailand

Email：[e-mail]
TEL：[phone]

6th generation Intel Core i3/i5/i7 multi-core processor provides up to
20% higher performance

8GB (up to 64GB) DDR4 2133MHz RAM

Thunderbolt™ 2 port for 20Gbps ultra-high transmission speeds

40GbE and 10GbE network interfaces for high-speed le sharing

M.2 SATA 6GB/s and SSD slots with support for PCIe NVMe SSD

P/N: 51000-024082-RS

201608 (ENG) E