QNAP TS-h1283XU-RP-E2236-32G User Manual

Hardware Specification

TS-h1283XU-RP-E2236-32G

CPU Intel® Xeon® E-2236 6-core/12-thread 3.4 GHz processor (burst up to 4.8 GHz)

CPU Architecture 64-bit x86

Floating Point Unit Yes

Encryption Engine Yes (AES-NI)

System Memory 32 GB UDIMM DDR4 ECC (2 x 16GB)

Maximum Memory 128 GB (4 x 32 GB)

Memory Slot 4 x Long-DIMM DDR4

Flash Memory 5GB (Dual boot OS protection)

Drive Bay 12 x 3.5-inch SATA 6Gb/s, 3Gb/s

Drive Compatibility 3.5-inch bays:

3.5-inch SATA hard disk drives

2.5-inch SATA hard disk drives

2.5-inch SATA solid state drives

Hot-swappable Yes

SSD Cache Acceleration
Support

Yes

Gigabit Ethernet Port
(RJ45)

4

10 Gigabit Ethernet Port 2 x 10GbE SFP+ SmartNIC port, 2 x 10GBase-T port

Jumbo Frame Yes

PCIe Slot 4

Slot 1: PCIe Gen 2 x4 (PCH)
Slot 2: PCIe Gen 3 x8 (CPU)
Slot 3: PCIe Gen 3 x4 (CPU)
Slot 4: PCIe Gen 3 x4 (CPU)

USB 3.2 Gen 2 (10Gbps)
Port

2 x Type-C USB 3.2 Gen 2 5V/3A 10Gbps
4 x Type-A USB 3.2 Gen 2 5V/1A 10Gbps

Form Factor 2U Rackmount

LED Indicators HDD 1-12, Status, LAN, storage expansion port status

Buttons Power, Reset

Dimensions (HxWxD) 88.3 × 482 × 562 mm

Weight (Net) 11.75 kg

Operating temperature 0 - 40 °C (32°F - 104°F)

Relative Humidity 5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F)

Power Supply Unit 300W(x2), 100-240V

Power Consumption:
Operating Mode, Typical

105.12 W

Fan System fan: 2 x 60mm, 12VDC

Sound Level 40.6 db(A)

System Warning Buzzer

Note: Use only QNAP memory modules to maintain system performance and stability. For NAS devices with more than one memory
slot, use QNAP modules with identical specifications. Warning: Using unsupported modules may degrade performance, cause errors,
or prevent the operating system from starting.
* Sound Level Test Environment: Refer to ISO 7779; Maximum HDD loaded; Bystander Position; Average data from 1 meter in front
of operating NAS.
Designs and specifications are subject to change without notice.