QNAP TS-932X-8G User Manual
Hardware Specification
TS-932X-8G
CPU AnnapurnaLabs, an Amazon company Alpine AL-324 Quad-core
1.7GHz ARM® Cortex-A57 Processor, 64-bit
Hardware Encryption Acceleration Yes
System Memory 8GB DDR4 2400 (1 x 8 GB)
Maximum Memory 16 GB (1 x 16 GB)
Memory Slot 1 x SODIMM slot
Flash Memory 512 MB NAND Flash
Drive Bay 5 x 3.5-inch SATA 6 Gbps bays
4 x 2.5-inch SATA 6 Gbps bays
Hot-swappable
Drive Compatibility 3.5-inch bays:
3.5-inch SATA hard disk drives
2.5-inch SATA hard disk drives
2.5-inch SATA solid state drives
2.5-inch bays:
2.5-inch solid state drives
10 Gigabit Ethernet Port 2 x 10GbE SFP+
Gigabit Ethernet Port 2 x Gigabit RJ45
USB Port USB 3.0 (Front: 1; Rear: 2)
Audio 1 x Built-in speaker, 1 x 3.5mm line out jack
Note: You cannot use the speakers and the line-out jack
simultaneously.
LED Indicators Status/Power, LAN, USB, HDD 1-5, SSD 1-4
Buttons Power, Reset, USB One- touch-copy
System Warning Voice prompts
Form Factor Tower
Dimensions (H x W x D) 224.7 x 182.7 x 223.6 mm
8.8 x 7.2 x 8.8 inch
Power Consumption (W) HDD standby：21.66 W
In operation：42.15 W
(with 5 x HDDs and 4 x SSDs installed)
Sound Level Sound pressure (LpAm): 18.7 dB(A)
Weight Net weight: 3.53 kg (7.78 lbs)
Gross weight: 5.06 kg (11.15 lbs)
Fan 1 x 14cm smart Fan (12V DC)
Power Supply Unit 120W AC external adapter, 100-240V
Operating Temperature & Relative
Humidity
0 ~ 40˚C ( 32˚F ~ 104˚F ), 5 ~ 95% RH non-condensing, wet bulb:
27˚C (80.6˚F)
Security Slot Kensington security slot
Note: Use only QNAP memory modules to maintain system performance and stability. For NAS devices with more than one
memory slot, use QNAP modules with identical specifications. Warning: Using unsupported modules may degrade
performance, cause errors, or prevent the operating system from starting.
* Sound Level Test Environment: Refer to ISO 7779; Maximum HDD loaded; Bystander Position; Average data from 1 meter in
front of operating NAS.
Designs and specifications are subject to change without notice.
Loading...