QNAP TS-883XU-E2124-8G User Manual

Hardware Specification

TS-883XU-E2124-8G

CPU Intel® Xeon® E-2124 quad-core 3.3 GHz processor (burst up to 4.3 GHz)

CPU Architecture 64-bit x86

Floating Point Unit Yes

Encryption Engine Yes (AES-NI)

System Memory 8 GB UDIMM DDR4 ECC (2 x 4GB)

Maximum Memory 64 GB (4 x 16 GB)

Memory Slot 4 x DDR4 long DIMM

Flash Memory 4GB (Dual boot OS protection)

Drive Bay 8 x 3.5-inch

Drive Compatibility 3.5-inch bays:

3.5-inch SATA hard disk drives

2.5-inch SATA hard disk drives

2.5-inch SATA solid state drives

Hot-swappable Yes

SSD Cache Acceleration Support Yes

Gigabit Ethernet Port (RJ45) 4

10 Gigabit Ethernet Port 2 x 10GbE SFP+ SmartNIC port

Jumbo Frame Yes

PCIe Slot 4

Slot 1: PCIe Gen2 x4 (PCH)
Slot 2: PCIe Gen3 x8 (CPU)
Slot 3: PCIe Gen3 x4 (CPU)
Slot 4: PCIe Gen3 x4 (CPU)

Slot 4 is preinstalled with a 10GbE network adapter

USB 3.1 Gen 2 (10Gbps) Port 2 x Type-C USB 3.1 Gen2 5V/3A 10Gbps

4 x Type-A USB 3.1 Gen2 5V/1A 10Gbps

Form Factor 2U Rackmount

LED Indicators HDD 1-8, Status, LAN, storage expansion port status

Buttons Power, Reset

Dimensions (HxWxD) 88.3 × 482 × 562 mm

Weight (Net) 10.39 kg

Operating temperature 0 - 40 °C (32°F - 104°F)

Relative Humidity 5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F)

Power Supply Unit 350W, 100-240V

Power Consumption: Operating
Mode, Typical

72.16 W

With drives fully populated

Fan System: 2 x 6.0cm fan (12V DC)

Sound Level 40.3 db(A)

System Warning Buzzer

Kensington Security Slot Yes

Note: Use only QNAP memory modules to maintain system performance and stability. For NAS devices with more than one memory
slot, use QNAP modules with identical specifications. Warning: Using unsupported modules may degrade performance, cause errors,
or prevent the operating system from starting.
* Sound Level Test Environment: Refer to ISO 7779; Maximum HDD loaded; Bystander Position; Average data from 1 meter in front
of operating NAS.
Designs and specifications are subject to change without notice.