How it Works
Qnap
Loading...
TS-832X
User Manual
42 pgs1.75 Mb0
Table of contents
Loading...

Qnap TS-832X User Manual

TS-832X
User Guide
Document Version: 1 07/05/2018
TS-832X User Guide

Contents

1. Preface
About This Guide.......................................................................................................................................... 3
Audience.......................................................................................................................................................3
Document Conventions................................................................................................................................ 3
2. Product Overview
Front Panel...............................................................................................................................................6
Rear Panel................................................................................................................................................7
Left Panel................................................................................................................................................. 7
Right Panel...............................................................................................................................................8
Drive Numbering.......................................................................................................................................8
3. Installation and Configuration
Hardware Installation.................................................................................................................................. 10
Drive Installation.....................................................................................................................................10
Installing Expansion Cards.....................................................................................................................15
Replacing Memory Modules...................................................................................................................19
QTS Installation.......................................................................................................................................... 22
Installing QTS Using Qfinder Pro........................................................................................................... 22
Installing QTS Using the Cloud Key....................................................................................................... 24
4. Basic Operations
Power Button.............................................................................................................................................. 26
Reset Button............................................................................................................................................... 26
USB One Touch Copy Button..................................................................................................................... 26
LEDs........................................................................................................................................................... 27
Beep Alarm................................................................................................................................................. 28
5. Troubleshooting
6. Glossary
7. Notices
Limited Warranty.........................................................................................................................................32
1
Disclaimer................................................................................................................................................... 32
GNU Public License....................................................................................................................................32
FCC Notice................................................................................................................................................. 40
CE Notice....................................................................................................................................................40
SJ/T 11364-2006.........................................................................................................................................41
2
TS-832X User Guide

1. Preface

About This Guide

This guide provides information on the QNAP TS-832X NAS and step-by-step instructions on installing the hardware. It also provides instructions on basic operations and troubleshooting information.

Audience

This document is intended for consumers and storage administrators. This guide assumes that the user has a basic understanding of storage and backup concepts.

Document Conventions

Symbol Description
Notes provide default configuration settings and other supplementary information.
Important notes provide information on required configuration settings and other critical information.
Tips provide recommendations or alternative methods of performing a task or configuring settings.
Warnings provide information, that when ignored, may result to potential loss, injury, or even death.
Preface 3
TS-832X User Guide

2. Product Overview

This chapter provides basic information about the QNAP TS-832X NAS.

About the TS-832X

The TS-832X NAS is well-suited for growing businesses in need of cost-effective storage, backup, restoration, and private cloud solutions. Featuring two 10GbE SFP+ ports as well as two 1GbE RJ45 ports, the TS-832X scales to the needs of modern networks. The TS-832X supports up to eight storage drives, storing an enormous amount of data within its compact frame. Equipped with a quad-core ARM processor, the TS-832X also features a hardware-accelerated encryption engine to keep data secure.

Hardware Specifications

Important
Modifying the hardware or software of your QNAP product invalidates the warranty. QNAP is not responsible for any damage or data loss caused by unauthorized modifications and installation of unsupported third-party applications.
Component TS-832X
Ordering Information
Ordering P/N • TS-832X-2G
• TS-832X-8G
Processor
CPU Annapurna Labs Alpine AL-324 quad-core ARM® Cortex-A57 1.7GHz
Processor
Architecture 64-bit
Encryption engine AES-256
Memory
Pre-installed memory • 2 GB RAM: 1 x 2 GB DDR4
• 8 GB RAM: 1 x 8 GB DDR4
Use only QNAP memory modules to maintain system performance and stability. For NAS devices with more than one memory slot, use QNAP modules with identical specifications.
Important
Using unsupported modules may degrade performance, cause errors, or prevent the operating system from starting.
Total memory slots 1 x SODIMM DDR4
Maximum memory 16 GB (1 x 16 GB)
Flash Memory 512 MB
Storage
Drive bays • 8 x 3.5-inch SATA 6 Gbps bays
Drive compatibility • 3.5-inch SATA hard disk drives
• 2.5-inch SATA hard disk drives
• 2.5-inch SATA solid state drives
Product Overview 4
Component TS-832X
Hot-swappable Yes
Network
10 gigabit Ethernet ports 2 x 10 Gigabit SFP+
Gigabit Ethernet ports 2 x Gigabit RJ45
External I/O Ports & Expansion Slots
PCIe slots • 1 x PCIe 2.0 x1
• 1 x PCIe 2.0 x2
USB ports • Front: 1 x USB 3.0 Type-A
Note
You can use the One-Touch Copy button with this port.
• Rear: 2 x USB 3.0 Type-A
Audio • 1 x 3.5 mm line-out jack
• 1 x speaker
TS-832X User Guide
Note
You cannot use the speaker and the line-out jack simultaneously.
Interface
Buttons • Power
• USB One Touch Copy
• Reset
Dimensions
Form factor Tower
Dimensions (H x W x D) 188.2 x.329.3 x 279.6 mm
7.41 x 12.96 x 11.01 in
Net weight 6.52 kg (14.37 lbs)
Other
Power supply unit 250W, 100-240V AC, 50/60Hz
System battery CR2032 lithium battery (3V, 225mAh)
Warning
When replacing the system battery, only use the same battery type as the existing one to avoid explosions.
Fans 2 x 120 mm, 12V DC
Warning
To avoid serious injuries, do not touch the fans while the NAS is connected to a power source.
Operating temperature 0 to 40˚C (32 to 104˚F)
Relative humidity • Non-condensing relative humidity: 5 to 95%
• Wet-bulb temperature: 27˚C (80.6˚F)
Security slot Kensington security slot
Product Overview 5
Tip
Model specifications are subject to change without prior notice. To see the latest specifications, go to https://www.qnap.com.

Package Contents

Item Quantity
TS-832X NAS 1
AC power adapter 1
Power cord 1
Ethernet cable 2
Screws for 2.5-inch drives 24
Screws for 3.5-inch drives 32
Quick Installation Guide (QIG) 1

Components

TS-832X User Guide

Front Panel

No. Component No. Component
1 Drive LEDs 5 USB LED
2 Power button 6 LAN LED
3 USB 3.0 One-Touch Copy port 7 Status LED
4 USB One-Touch Copy button - -
Product Overview 6

Rear Panel

TS-832X User Guide
No. Component No. Component
1 Power input 6 Gigabit Ethernet RJ45 ports
2 Speaker 7 3.5 mm audio jack
3 Kensington security slot 8 PCIe slots with covers
4 USB 3.0 Type-A ports 9 Reset button
5 10 Gigabit Ethernet SFP+ ports - -

Left Panel

Product Overview 7
No. Component No. Component
1 PCIe 2.0 x1 slot 2 PCIe 2.0 x2 slot

Right Panel

TS-832X User Guide
No. Component No. Component
1 Memory slot 1 - -

Drive Numbering

Product Overview 8

Installation Requirements

Category Item
Environment • Room temperature: 0 to 40˚C (32 to 104˚F)
• Non-condensing relative humidity: 5 to 95%
• Wet-bulb temperature: 27˚C (80.6˚F)
• Flat, anti-static surface with no exposure to direct sunlight, liquids, and chemicals
Hardware and peripherals • Storage drives
For details on compatible drives, go to https://www.qnap.com/
compatibility/.
• Network cable
Tools • Phillips #1 or #2 screwdriver
• Anti-static wrist strap
TS-832X User Guide

Setting Up the NAS

1. Place your NAS device in an environment that meets the requirements.
For details, see Installation Requirements.
2. Install the drives. For details, see the following topics:
• Installing 3.5-inch Hard Drives on 3.5-inch Trays
• Installing 2.5-inch Hard Drives or Solid State Drives on 3.5-inch Trays
3. Connect the power cord and all applicable cables.
4. Power on the NAS.
5. Install QTS.
For details, see QTS Installation.
6. Log on to QTS.
Product Overview 9
TS-832X User Guide

3. Installation and Configuration

This chapter provides specific hardware and firmware installation and configuration steps.

Hardware Installation

This section provides information on installing drives, memory modules, and expansion cards.

Drive Installation

The TS-832X is compatible with 3.5-inch and 2.5-inch hard drives, and 2.5-inch solid state drives.
Installing 3.5-inch Hard Drives on 3.5-inch Trays
Warning
• Installing a drive deletes all data on the drive.
• Observe electrostatic discharge (ESD) procedures to avoid damage to components.
1. Power off the NAS.
2. Remove the drive tray.
a. Slide the lock down.
b. Pull the tray handle outward.
c. Pull the tray out.
3. Install a drive on the tray.
a. Remove the fastening panels from the sides of the drive tray.
Installation and Configuration 10
TS-832X User Guide
b. Place the drive on the tray so that the holes on the sides of the drive are aligned with the holes on
the sides of the tray.
c. Attach the fastening panels to lock the drive to the tray.
d. Optional: Attach the screws to further secure the drive.
Installation and Configuration 11
TS-832X User Guide
4. Load the tray into the bay.
a. Slide the tray into the drive bay.
b. Push the handle.
c. Slide the lock up.
5. Power on the NAS.
Installing 2.5-inch Hard Drives or Solid State Drives on 3.5-inch Trays
Warning
Installation and Configuration 12
Loading...
+ 29 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use