QNAP TS-673-8G User Manual

0 (0)
QNAP TS-673-8G User Manual

Hardware Specification

TS-673-8G

CPU

Processor: AMD R-Series RX-421ND quad-core 2.1 GHz processor,

 

Turbo Core up to 3.4 GHz

 

Architecture: 64-bit

 

Encryption Engine: AES-NI

 

 

System Memory

8 GB DDR4 (2 x 4 GB)

 

 

Maximum Memory

64 GB (4 x 16 GB)

 

 

Memory Slot

4 x SODIMM DDR4

 

(For dualor quad-DIMM configurations, you must use a pair of

 

identical DDR4 modules.)

 

 

Flash Memory

512MB DOM

 

 

Drive Bay

6 x SATA 6 Gbps

 

 

Drive Compatibility

3.5-inch SATA hard disk drives

 

2.5-inch SATA hard disk drives

 

2.5-inch SATA solid state drives

 

 

M.2 SSD Slot

2 x M.2 2260/2280 SATA 6Gb/s SSDs (Sold separately)

 

Note:

 

1. The M.2 SSD is not included as standard.

 

2. M.2 SSD operations can easily generate excessive heat. It is

 

recommended to install a heatsink (from QNAP or a third-party

 

provider) on the M.2 SSD.

 

 

SSD Cache Acceleration Support

Drive bays 1 to 6

 

M.2 slots 1 to 2

 

Optional: M.2 SSD using QNAP QM2 PCIe expansion card

 

 

Hot-swappable

Yes,

 

The following are not hot-swappable: M.2 SSDs, SSD cache drives,

 

SSDs using PCIe expansion slots.

 

 

Gigabit Ethernet Port

4 x RJ45

 

 

PCIe Slot

2 x PCIe 3.0 x4

 

Note: Support full-height 10GbE LAN card, USB 3.1 Gen2 (10Gb/s)

 

expansion card, QM2 card, PCIe wireless network card or a bus-

 

powered graphics card.

 

 

USB Port

4 x USB 3.0 (Front: 1; Back: 3)

Loading...
+ 1 hidden pages