QNAP QSW-800 User Manual
Hardware Specification
QSW-804-4C
10G SFP+ (fiber) ports 4
10G SFP+ (fiber) and RJ-45
(copper) ports (combo)
Form Factor Desktop/rackmount
Switching capacity 160 Gbps
MAC address caching capacity 27K
Number of priority queues 8
Jumbo frame support Up to 9K packet size
Power Supply Unit 100 - 240 V AC, 50 -60 Hz, max. 2.5 A
Power Consumption (W) All ports used, line-rate traffic: 41 W
Fan 2 low-noise smart fans
Sound Level @ 25°C: 18.2 dB(A)
Operating Temperature & Relative
4
Link-down standby: 21W
0 - 40 C / 32 - 104° F
Humidity
Electromagnetic compliance Class A
LED Indicators Per switch: Power
Dimensions (H x W x D) 43 x 285 x 233 mm
Weight 2.10 kg
Limited warranty 2 years
10 - 85%, non-condensing
Per port: Speed, link, activity
Supported standards IEEE 802.3 Ethernet
IEEE 802.3u 100BASE-TX
IEEE 802.3ab 1000BASE-T
IEEE 802.3x Full-Duplex Flow Control
IEEE 802.1p Class of Service
IEEE 802.3az Energy Efficient Ethernet (EEE)
IEEE 802.3an 10GBASE-T
IEEE 802.3bz 5Gbps and 2.5Gbps Ethernet Over Copper Twisted Pair
Cable
IEEE 802.3ae 10-Gigabit Ethernet Over Fiber
IEEE 802.3aq 10-Gigabit over Fiber (10GBASE-LRM)
IEEE 802.3z Gigabit Ethernet 1000BASE-SX/LX
Note: Use only QNAP memory modules to maintain system performance and stability. For NAS devices with more than one
memory slot, use QNAP modules with identical specifications. Warning: Using unsupported modules may degrade
performance, cause errors, or prevent the operating system from starting.
* Sound Level Test Environment: Refer to ISO 7779; Maximum HDD loaded; Bystander Position; Average data from 1 meter in
front of operating NAS.
Designs and specifications are subject to change without notice.
Loading...