QNAP QSW-1208-8C User guide

Kurzinstallationsanleitung

快速安装指南

Guida di installazione rapida

Pika-asennusopas

快速安裝手冊

빠른 설치 설명서

Guía de Instalación Rápida

クイックインストールガイド

Hızlı Kurulum Kılavuzu

คู่มือการติดตั้งแบบเร็ว Gyors telepítési útmutató

Průvodce rychlou ins talací

Instrukcja szybkiej instalacji

Guia de Instalação Rápida

Hurtig installationsvejledning

Pika-asennusopas Installatiegids
Snelle Installatiegids

Hurtiginstallasjonsveiledning

Snabbinstallationsguide

Краткое руководство по установке

QSW-1208-8C
Quick Installation Guide

www.qnap.com

Package Contents

QSW-1208-8C

Rackmount brackets Power cordFoot pads Bracket screws

1

Hardware Overview

SFP+ Ports 1-4

SFP+ ports support 10 Gbps connections.

SFP+/RJ45 Combo Ports 5-12

Each port number has two types: SFP+ and RJ45. Users may select either one to connect.

Front Panel Ports

2

Front Panel LED

Status

▪ Off: System down.
▪ Green: System is ready for use. Flashing indicates

bootup in progress.

▪ Amber: System warning, e.g. high temperature or fan

error.

SFP+ Ports 1-12

▪ Off: No link.
▪ Green: Link is up and operates at 10 Gbps. Flashing

indicates network activity.
▪ Amber: Link is up and operates at 1 Gbps. Flashing

indicates network activity.

RJ45 Ports 5-12

▪ Off: No link.
▪ Green: Link is up and operates at 10 Gbps. Flashing

indicates network activity.
▪ Amber: Link is up and operates at 1 Gbps, 2.5 Gbps

or 5 Gbps. Flashing indicates network activity.

3

Back Panel

AC Input Power

Side Panel

K-SlotMaintenance Port

Bolt Hole

Bolt HoleFan

4

Hardware Installation

Horizontal Surface

1

Place four foot pads at the bottom of the QSwitch.

Mounting in a Rack

2

Attach the rackmount brackets to the QSwitch using six bracket screws.
Attach the QSwitch to the rack using two mounting screws.

1

2 2

5

1

Connecting RJ45

Connect an Ethernet cable from your computer or host system to any RJ45 port of the QSwitch.

5

Connect Ethernet cable from your device to other RJ45 ports of the QSwitch.

1 2

Combo Port Instruction

You can only choose either SFP+ or RJ45 for connection. RJ45 will have higher priority if both

connections are used.

6

Connecting Power

Connect the power cord to the power port of the QSwitch.

3

Connect the other end of the power cord to a power outlet.

2

1

Connecting SFP+

Plug a compatible ber module into any SFP+ port of the QSwitch.

4

Connect an optical ber cable to the ber module. Then connect the other end of the cable to another
ber device.

1

2

7

Specications

Model QSW-1208-8C

Dimensions (H x W x D) 43 x 285 x 233 mm

Net weight 2.15 kg

Supported voltage range 100 to 240VAC

Switching capacity 240Gbps

SFP+ ports 4

Combo ports (SFP+/RJ45) 8

Operating temperature 0 - 40˚C / 32~104°F

Relative humidity 5~95% Non-condensing, wet bulb: 27˚C

8

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause
undesired operation.

FCC Class A Notice:
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy,
and if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference, in which case the user will be required to correct the
interference at his own expense.

Modifications: Any modifications made to this device that are not approved by QNAP Systems,

Inc. may void the authority granted to the user by the FCC to operate this equipment.

This device complies with CE compliance Class A.

According to the requirement of the WEEE legislation the following user information is

provided to customers for all branded QNAP Electronics products subject to the WEEE

directive.

This symbol on the product or on its packaging indicates that this product must not be
disposed of with your other household waste. Instead, it is your responsibility to dispose of
your waste equipment by handing it over to a designated collection point for the recycling of
waste electrical and electronic equipment. The separate collection and recycling of your waste
equipment at the time of disposal will help to conserve natural resources and ensure that it is
recycled in a manner that protects human health and the environment. For more information
about where you can drop off your waste equipment for recycling, please contact your local

city office, your household waste disposal service or the shop where you purchased the

product.

更多關於安全、法規，與環境法令遵循相關的資訊，請參閱以下網址 www.qnap.com/regulatory/。

9

10

start.qnap.com

helpdesk.qnap.com

docs.qnap.com

www.qnap.com/download

Printed in Taiwan

P/N: 51000-024465-RS