QNAP QSW-1108-8T User guide

Page 1
QSW-1108-8T Quick Installation Guide
QSW-1108-8T
LNK / ACT :
2.5G 10/100/1000M
DC IN
www.qnap.com
Page 2
QSW-1108-8T
LNK / ACT :
2.5G 10/100/1000M
QSW-1108-8T Quick Installation Guide
DC IN
Bracket screws Anchors Foot pads
QSW-1108-8T
LNK / ACT :
2.5G10/100/1000M
www.qnap.com
Specications
Model QSW-1108-8T
Dimensions (H x W x D) 27 x 240 x 105 mm
Net weight 639g
Input voltage range 100–240VAC
Switching bandwidth 40 Gbps
2.5GbE RJ45 ports 8
Operating temperature 0˚C–40˚C (32°F –104°F)
Relative humidity 10% to 90% (non-condensing)
DC IN
Page 3
EN
QSW-1108-8T
LNK / ACT :
2.5G 10/100/1000M
1 2 4 53
1. Loop indicator 4. 2.5GbE RJ45 ports
2. Power LED 5. Power input
3. 2.5GbE ports status
LED Behavior
LED Status Description
Green Device is on
Power
O Device is o
O No loop
Loop indicator
2.5GbE ports status
Red and ashing
with looping ports
Green
Amber
Loop occurs
Link is operating at 2.5 Gbps
Flashing: link up and data transfer O: no link Flashing with loop indicator: port loop and
blocked by loop protection
Link is operating at 1G/100M/10M bps
Flashing: link up and data transfer O: no link Flashing with loop indicator: port loop and
blocked by loop protection
DC IN
Page 4
DE
QSW-1108-8T
LNK / ACT :
2.5G 10/100/1000M
1 2 4 53
1. Schleifenanzeige 4. 2,5GbE RJ45 Ports
2. Betriebsanzeige-LED 5. Anschluss für Netzkabel
3. 2,5GbE Port-Status LED
LED Verhalten
LED Status Beschreibung
Grün Gerät ist eingeschaltet
Betriebszustand
Aus Gerät ist ausgeschaltet
Aus Keine Schleife
Schleifenanzeige
2,5GbE Port-Status
Rot und blinkend
mit Ports in Schleife
Grün
Gelb
Schleife tritt auf
Link arbeitet mit 2,5 Gbps
Blinkend: Link aktiv und Datenübertragung Aus: Kein Link Blinkend mit Schleifenanzeige: Portschleife und blockiert durch Schleifenschutz
Link arbeitet mit 1G/100M/10Mbps
Blinkend: Link aktiv und Datenübertragung Aus: Kein Link Blinkend mit Schleifenanzeige: Portschleife und blockiert durch Schleifenschutz
DC IN
Page 5
FR
QSW-1108-8T
LNK / ACT :
2.5G 10/100/1000M
1 2 4 53
1. Indicateur de boucle 4. Ports 2,5GbE RJ45
2. Témoin d’alimentation 5. Entrée d’alimentation
3. LED d’état des ports 2,5GbE
Comportement de la LED
LED État Description
Vert L’appareil est activé
Alimentation
Désactivé L’appareil est désactivé
DC IN
Indicateur de boucle
État des ports 2,5GbE
Désactivé Aucune boucle
Rouge et clignotant avec les ports de
Une boucle se produit
boucle
La liaison fonctionne à 2,5 Gbit/s Clignotant : liaison montante et transfert de
Vert
données
Désactivé : pas de liaison Clignotant avec indicateur de boucle : boucle du
port et bloquée par la protection de boucle
La liaison fonctionne à 1G/100M/10M bit/s Clignotant : liaison montante et transfert de
Orange
données
Désactivé : pas de liaison Clignotant avec indicateur de boucle : boucle du
port et bloquée par protection de boucle
Page 6
IT
QSW-1108-8T
LNK / ACT :
2.5G 10/100/1000M
1 2 4 53
1. Indicatore loop 4. Porte 2,5GbE RJ45
2. LED di alimentazione 5. Ingresso alimentazione
3. LED stato porta 2,5GbE
Comportamento del LED
LED Stato Descrizione
Verde Dispositivo acceso
Alimentazione
Disattivo Dispositivo spento
Disattivo Nessun loop
Indicatore loop
Stato porte 2,5GbE
Rosso e lampeggiante con porte in loop
Verde
Ambra
Loop in esecuzione
Collegamento operativo a 2,5 Gbps
Lampeggiante: collegamento attivo e trasferimento dati Spento: nessun collegamento Lampeggiante con indicatore loop: loop porta e
bloccato tramite protezione loop Collegamento operativo a 1G/100M/10M bps
Lampeggiante: collegamento attivo e trasferimento dati Spento: nessun collegamento Lampeggiante con indicatore loop: loop porta e
bloccato tramite protezione loop
DC IN
Page 7
ES
QSW-1108-8T
LNK / ACT :
2.5G 10/100/1000M
1 2 4 53
1. Indicador de bucle 4. Puertos 2,5GbE RJ45
2. LED de alimentación 5. Entrada de alimentación
3. LED de estado de puertos de 2,5GbE
Comportamiento del LED
LED Estado Descripción
Verde El dispositivo está encendido
Energía
Apagado El dispositivo está apagado
DC IN
Indicador de bucle
Estado de puertos de 2,5GbE
Apagado Sin bucle
Rojo y parpadeante con
Ocurre un bucle
puertos en bucle
La conexión está funcionando a 2,5 Gbps Parpadeante: conexión establecida y transferencia
Verde
de datos
Apagado: sin conexión Parpadeante con indicador de bucle: bucle de puerto y bloqueado mediante protección frente a bucles La conexión está funcionando a 1G/100M/10M bps Parpadeante: conexión establecida y transferencia
Ámbar
de datos
Apagado: sin conexión Parpadeante con indicador de bucle: bucle de puerto y bloqueado mediante protección frente a bucles
Page 8
TW
QSW-1108-8T
LNK / ACT :
2.5G 10/100/1000M
1 2 4 53
1. 迴圈指示燈 4. 2.5GbE RJ45 埠
2. 電源 LED 燈 5. 電源輸入
3. 2.5GbE 埠狀態燈
LED 燈號
LED 狀態 說明
綠燈 裝置開機
電源
關閉 裝置關機
關閉 無迴圈
迴圈指示燈
2.5GbE 埠狀態燈
迴圈連接埠閃爍紅 燈
綠燈
琥珀色燈
形成迴圈
連線速度為 2.5 Gbps 閃爍:已連線且有封包傳輸 熄滅:無連線 迴圈指示燈閃爍:連接埠形成迴圈且已被迴圈偵 測關閉此連接埠
連線速度為 1G/100M/10M bps 閃爍:已連線且有封包傳輸 熄滅:無連線 迴圈指示燈閃爍:連接埠形成迴圈且已被迴圈偵 測關閉此連接埠
DC IN
Page 9
CN
QSW-1108-8T
LNK / ACT :
2.5G 10/100/1000M
1 2 4 53
1. 环路指示灯 4.2.5GbE RJ45 端口
2. 电源 LED 5. 电源输入
3. 2.5GbE 端口状态 LED
LED 行为
LED 状态 描述
绿色 设备开机
电源
熄灭 设备关机
熄灭 无环路
环路指示灯
环路端口红色闪烁 发生环路
DC IN
2.5GbE 端口状态
绿色
琥珀色
链路以 2.5 Gbps 的速度运行 闪烁:链路正常并传输数据 熄灭:无链路 环路指示灯闪烁:端口环路并受环路保护阻止
链路以 1G/100M/10M bps 的速度运行 闪烁:链路正常并传输数据 熄灭:无链路 环路指示灯闪烁:端口环路并受环路保护阻止
Page 10
JP
QSW-1108-8T
LNK / ACT :
2.5G 10/100/1000M
1 2 4 53
1. ループインジケータ 4. 2.5GbE RJ45 ポート
2. 電源 LED 5. 電源入力
3. 2.5GbE ポートステータス LED
LED の動作
LED 状態 LED
緑色 電源
電源
オフ デバイスがオフです
オフ ループインジケータ
ループインジケータ
ループポートで赤く 点滅
ループ発生
DC IN
2.5GbE ポートステー タス
緑色
琥珀色
リンクは 2.5 Gbps で動作しています 点滅:リンク起動およびデータ転送 オフ:リンクなし ループインジケータで点滅:ポートループおよびループ 保護でブロック
リンクが 1G/100M/10M bps で動作しています 点滅:リンク起動およびデータ転送 オフ:リンクなし ループインジケータで点滅:ポートループおよびループ 保護でブロック
Page 11
TH
QSW-1108-8T
LNK / ACT :
2.5G 10/100/1000M
1 2 4 53
1. ไฟแสดงผลลูป 4. พอร์ต 2.5GbE RJ45
2. ไฟ LED พลังงาน 5. อินพุทพลังงาน
3. LED สถานะพอร์ต 2.5GbE
DC IN
พฤติกรรม
LED
LED สถานะ คำาอธิบาย
เขียว อุปกรณ์เปิดอยู่
พลังงาน
ปิด อุปกรณ์ปิดอยู่
ปิด ไม่มีลูป
ไฟแสดงผลลูป
สีแดงและกะพริบพร้อมพอร์ตลูป ลูปเกิดขึ้น
การเชื่อมโยงทำางานที่ 2.5 Gbps กะพริบ: เริ่มเชื่อมโยงและถ่ายโอนข้อมูล
เขียว
ปิด: ไม่มีการเชื่อมโยง กะพริบพร้อมไฟแสดงผลลูป:
สถานะพอร์ต 2.5GbE
พอร์ตลูปถูกบล็อกโดยการป้องกันลูป
การเชื่อมโยงทำางานที่ 1G/100M/10M bps กะพริบ: เริ่มเชื่อมโยงและถ่ายโอนข้อมูล
สีเหลืองอำาพัน
ปิด: ไม่มีการเชื่อมโยง กะพริบพร้อมไฟแสดงผลลูป: พอร์ตลูปถูกบล็อกโดยการป้องกันลูป
Page 12
PL
QSW-1108-8T
LNK / ACT :
2.5G 10/100/1000M
1 2 4 53
1. Wskaźnik pętli 4. Porty 2,5 GbE RJ45
2. Dioda LED zasilania 5. Wejście zasilania
3. Dioda statusu portów 2,5 GbE
Zachowanie diod LED
Dioda LED Status Opis
Zielony Urządzenie włączone
Zasilanie
Wył. Urządzenie wyłączone
Wył. Brak pętli
Wskaźnik pętli
Status portu 2,5 GbE
Czerwone i
migające przy pętlach portów
Zielony
Żółty
Występuje pętla
Łącze działa z szybkością 2,5 Gb/s Miga: podłączanie i przesył danych Wyłączona: brak połączenia Miga ze wskaźnikiem pętli: pętla portu i zablokowanie przez ochronę pętli
Łącze działa z prędkością 1G/100M/10Mb/s Miga: podłączanie i przesył danych Wyłączona: brak połączenia Miga ze wskaźnikiem pętli: pętla portu i zablokowanie przez ochronę pętli
DC IN
Page 13
KO
QSW-1108-8T
LNK / ACT :
2.5G 10/100/1000M
1 2 4 53
1. 루프 표시등 4. 2.5GbE RJ45 포트
2. 전원 LED 5. 전원 입력
3. 2.5GbE 포트 상태 LED
LED 동작
LED 상태 설명
녹색 장치 켜짐
전원
꺼짐 장치 꺼짐
꺼짐 루프 없음
루프 표시등
루핑 포트가 적색으로 깜박임
루프 발생
DC IN
2.5GbE 포트 상태
녹색
황색
링크가 2.5 Gbps 에서 작동됨 깜박임 : 링크 작동 및 데이터 전송 중임 꺼짐 : 링크 없음 루프 표시등이 깜박임 : 포트 루프 및 루프 보호로 차단됨
링크가 1G/100M/10Mbps 로 작동됨 깜박임 : 링크 작동 및 데이터 전송 중임 꺼짐 : 링크 없음 루프 표시등이 깜박임 : 포트 루프 및 루프 보호로 차단됨
Page 14
1 2 3
3
1
2
Page 15
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operation.
FCC Class B Notice: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/television technician for help.
Modications: Any modications made to this device that are not approved by QNAP Systems, Inc. may void the authority granted to the user by the FCC to operate this equipment.
This QNAP device complies with CE Compliance Class B.
According to the requirement of the WEEE legislation the following user information is provided to customers for all branded QNAP products subject to the WEEE directive.
This symbol on the product or on its packaging indicates that this product must not be disposed
of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop o your waste equipment for recycling, please contact your local city oce, your household waste
disposal service or the shop where you purchased the product.
更多關於安全、法規,與環境法令遵循相關的資訊,請參閱以下網址
Oce in EU; QNAP GmbH, Linsellesstrasse 109 47877 Willich, Germany
声明 此为 A 级产品,在生活环境中,该产品肯能会造成无线电干扰。 在这种情况下,可能需要 用户对其干扰采取切实可行的措施。仅适用于海拔 2000m 以下地区安全使用。
※付属の電源コードは当該製品専用です。他の機器に使用しないでください。
Oce in UK; QNAP Ltd, 2 Drakes Meadow, Swindon SN3 3LL United Kingdom
www.qnap.com/regulatory/
Page 16
install.qnap.com
service.qnap.com
download.qnap.com
Loading...